Custom Built High Steer Arms For The One Ton Swap Jeep Cherokee
Вставка
- Опубліковано 3 жов 2024
- BACKCOUNTRY BEAGLES MERCH IS LIVE! (Link below)
backcountrybea...
This has been along time coming, so be sure to check it out, I'm sure we'll have something for you!
We are starting out with shirts, sweatshirts and stickers... hats and more to come in the future!
Thank you to everyone who watches the videos, hits that like button, leaves a comment and has subscribed to the channel, because of you we are able to make this possible so thank you, thank you, thank you!
Anyways,
Part 9 of the Cherokee Resurrection Series, man does time fly! Today we are fabricating our own high steer arms for the Dana 60 as well as building a drag link and a trac bar. Be sure to watch until the end for some important house keeping/ updates!
We are putting out a video EVERY Wednesday until this Jeep drives out of the shop and onto the trail!
As always be sure to follow us on Instagram for real time updates, if you're watching the series in real time I'm about 2 weeks ahead of each video I post on here, so head over to Instagram for sneak peaks!
/ backcountrybeagles
Thank you all so much for watching, We'll see you out on the trail and we'll see you next time!
The Backcountry Beagles
Ash, Ron, Bella, Natalie, Lilli
Hey good job on your fabbing. I’m a machinist for the past 35 years and I’d higher you in my shop no problem.. a small tip though, pardon the pun, is to slow down the speed of your drill press for the hole saw, I know changing the belts sucks but your drills will cut better and last longer. (Do this also for your larger twist drills too.) I hope this helps.
Appreciate the kind words man🤘🏽next time I’ll give that shot. That was the first time I used that drill press so I’m still new to it. Thanks for the info!
Yukon and Motive Gear are the top two on gears just remember to get the full installation kits for the front and rear.
Revolution gear all the way!! I have them in my cherokee. Been in there for over 2yrs. It was a simple install. They are really quite. And they run smooth. They really took care of me when I called to order my gears they talked me through selection of the gears I needed bc I wasn't sure. Super helpful people over there. I really couldn't say enough good stuff about Revolution gear and their customer support
Thanks for the insight, heavily considering going with them. No problems with Yukon, I just like to try new brands every build.
@@backcountrybeagles I think you will be pleased with the price, performance, and customer service
Heck yeah man! Let's go Jeep'n. Great job once again! Hope those subs start kicking up to help fund this expensive hobby!
That's what I'm saying! 😅
Use pvc the same
Size as the tube u plan on using to eliminate for links and steering etc so that you can minimize waste, looking good tho! Good job
Heard lots of bad reviews of Yukons quality gone way down hill, I have always used revolution gear and have had good luck with them for years
I love this series man!
Glad you’re enjoying it. More to come!
Dude you have a bright future. Start you own small shop and seek parts. I’ll definitely buy and support you. For starters I need a xj swap truss for 2005 super dookie axles f/r and high steer arms😊
Appreciate the kind words🤘🏽 that’s the goal! Hopefully down the road sooner than later!
good job on the fab work and the video production!
Appreciate it!🤘🏽
Interested in an OX locker as well.
Should be buying one here soon. I’ll let ya’ll know what I think.
Would be awesome to run some trails with y’all when you get it done! Love the videos and the fabrication, keep up the good work man!
Thank you man, beautiful Jeep you got there, will deff hit the trails eventually!
Awesome video man. Keep up the good work 😃
Thank you man!
love the production of these vids bro
Thank you! Only the best 💪🏽👌🏽
You are a legend ! Love my Xj !!
Thank you, means a lot! Xj > wranglers 😂
A trail ride with you guys would be super cool as well
We’ll deff be setting something up, stayed tuned!
The new steering setup looks amazing!!
Thank you, trac bar next week!
Lets goo
👌👌
A Question Are you thinking of making the Stroker 4.6 Golden Stroker engine? I wonder why it will surely be more fun and you will have more power and torque to move those tires. What do you think :) .
We will for sure be doing something with the 4.0/an engine swap. 4.6 is on the table but I got some other ideas that would be alittle more interesting 🧐
@@backcountrybeaglesOkay I leave my opinion why I would like to see that 4.0 revive and have more life with that Stroker 4.6 supercharger don't lose it I just leave ideas 😂
Question on the one inch bolt choice, do you think drilling out the stock tie rod hole to one inch removed a lot of extra meat causing the stock cast piece to be weakened around the drilled hole ? maybe a 3/4" bolt is a good compromise. Love the videos keep up the good work
I thought about this for AWHILE. Finally came to the conclusion that there is still a lot of meat left around that old tie rod hole after drilling for 1”…..I’m no engineer but I’m sure it will be okay, but time will tell.
Your video and audio is really good! Idk if it’s just you running the show but maybe look into marketing your videos on UA-cam to pull in a bigger audience. I’ve watched worse video and worse audio on much bigger channels. Great job!!
Just a matter of hitting the right crowd! Appreciate the kind words!
What cut oil?
“Mach blue goo”. Picked it up at Lowe’s. I guess it’s more of a “lubricant” than an oil.