How To TURBO Your BMW M43 PT: 1 (STOCK ECU) 316i, 318i

Поділитися
Вставка
  • Опубліковано 9 лип 2022
  • We're taking it back to our roots with this turbo m43 bmw e36 compact build!
    10% off code: MikeLake
    Parts you will need:
    Turbo:
    Intercooler: bit.ly/3Rkh8zs
    Piping kit: bit.ly/3auWOLe
    Oil Lines: bitly.ws/sIHM
    Injectors:
    Fuel Pressure Regulator: bitly.ws/sIHR
  • Авто та транспорт

КОМЕНТАРІ • 284

  • @DreamProjectsMotorsports
    @DreamProjectsMotorsports 2 роки тому +107

    *fine, you’ve convinced me*

    • @itsmikelake
      @itsmikelake  2 роки тому

      Haha, your arm is easily twisted!

  • @kevinmenard6792
    @kevinmenard6792 2 роки тому +13

    The builds are the ones I love. I can sit and watch in depth high quality builds but these low budget but correct builds are what I live for.

  • @somesawce
    @somesawce 2 роки тому +50

    This is bloody awesome! Love these budget style builds man. So much inspiration!

    • @itsmikelake
      @itsmikelake  2 роки тому +6

      Cheers homie. They’re low key my fave builds too haha. The dyno / drive video is even better vibes than this one 😝

  • @cjr1696
    @cjr1696 2 роки тому +2

    The noises are awesome especially the turbo!

  • @kalebmcelhinney532
    @kalebmcelhinney532 2 роки тому +24

    This is going to give alot of hope and inspiration to the M4X gang gang

  • @monkeymsea01
    @monkeymsea01 2 роки тому +1

    Back to the roots love it!

  • @bencrosbie6003
    @bencrosbie6003 2 роки тому +4

    love a boosted compact sweet vid guys.

  • @kallebackstrom264
    @kallebackstrom264 2 роки тому +3

    This is sick! I've got an m42b18 and this is long overdue haha!

  • @jessiedunn4842
    @jessiedunn4842 2 роки тому +8

    I'm doing the same with a m50 in an e30 stock ecu, AU in tech injectors :) love seeing this!

    • @itsmikelake
      @itsmikelake  2 роки тому +1

      Hell yes bro you love to see it haha. Suss these injectors we’ve used as they’ll likely be perfect for you! Link in the description

  • @caiocesarchiocchini5331
    @caiocesarchiocchini5331 2 роки тому +1

    Awesome video and work man 👏👏👏

  • @Sparcology
    @Sparcology 2 роки тому +1

    picked up a 318i not too long ago and got a misfire and i haven’t touched it since. this is the motivation i needed

    • @itsmikelake
      @itsmikelake  2 роки тому +1

      Oooft get it fixed and turbo that sucker bro!

  • @Work_G
    @Work_G 2 роки тому +4

    Nice build and great info! I am working on mine E36, but still on restoration mode more than modifying 😅

    • @itsmikelake
      @itsmikelake  2 роки тому

      Thanks! Awesome, get it done then turbo 😝

  • @tuffcarsmedia
    @tuffcarsmedia 2 роки тому +3

    Im glad that you feel better! Covids kicking my ass at the moment, great video by the way!😃

    • @itsmikelake
      @itsmikelake  2 роки тому +2

      Oh bro, I hope you’re all good! Wouldn’t wish it on anyone. Rest up, drink heaps of hydralite. Cheers my dude

  • @zurtd6514
    @zurtd6514 2 роки тому +25

    Well this couldn’t have been timed better for me as I’m currently doing a turbo build on my m43 e46 right now!
    Cheers for always going in depth with the videos Mike and explaining it!!!

    • @itsmikelake
      @itsmikelake  2 роки тому +5

      Hell yeah bro that’s awesome! I figure if I can help at least one person, I’m happy 😁

    • @zurtd6514
      @zurtd6514 2 роки тому

      @@itsmikelake it’s certainly gonna come in handy for 🙂, how ever I’ll be running an ecu I’ve found online from the UK should be interesting to see how good the soft wear is 😅

    • @offshore3460
      @offshore3460 Рік тому

      @@zurtd6514 how did you get injectors to fit ford ones dont fit into manifold ports

    • @crum167
      @crum167 Рік тому

      ​@@offshore3460did you ever find an answer

    • @cx5_
      @cx5_ 9 місяців тому

      I wanna supercharge my m43b18 e36, stututu all the way, but the e36 wants a supercharger

  • @joshuaarceo3492
    @joshuaarceo3492 Рік тому +4

    Love what you did with the car! If I may ask, how did you put the adjustable fuel pressure regulator? My 316i turbo project runs lean I think, it runs with the stock fuel pressure regulator.

  • @Gentlemenhac
    @Gentlemenhac Рік тому

    Sick work, I've seen all the how to turbo your bmw and felt inspired and I'm doing the same thing now. At least im gonna try. Did you guys leave the oil restrictor instaled on the turbo oil feed inlet? thanks for the help.

  • @codyhayesandco.5543
    @codyhayesandco.5543 2 роки тому +3

    I'm keen to see the dyno results. Then I may have to find me a m43 to replace my dead m44 😉

  • @josephgarcia3568
    @josephgarcia3568 Рік тому +1

    Question, how were the fuel lines routed? I have an m42 and i assume the fuel setup is similar, just wondering where each line goes and how it goes lol

  • @dhaher121
    @dhaher121 2 роки тому +2

    Dam thats a great video bro, is there anything you can delete or get rid off it from the engine bay? Like the brake booster or anything to make more room? Hope to see a video talking about that, would be more helpful for anyone want to do the bmw, for me I haven't bought mine yet but I'm planning to do it lol 😆

  • @dorkvis5008
    @dorkvis5008 Рік тому +2

    love it , gonna buy my bmw next year and was thinking about wich one , seeing that i can do cheaper 318 and after that put turbo on it makes me happy :)

    • @dawoodmohammed2406
      @dawoodmohammed2406 Рік тому +2

      do u have any idea what turbo can i use for my m43 1.9L

    • @dorkvis5008
      @dorkvis5008 Рік тому

      @@dawoodmohammed2406 sorry man ,not really , i plan to dive into bmw after new year.

  • @ezratuin
    @ezratuin 2 роки тому

    This is sick!

  • @phibin777
    @phibin777 Рік тому +1

    Hey dude.. hope your well..
    finally doing the boosting!! :p
    quick questions...
    ICV pipes? just block it up?
    vac for carbon canister block?
    vac for the duel length intake block?
    and how many clicks did you give the AFM ? :p
    really looking forward to getting it finished now lol

  • @t9wunch883
    @t9wunch883 2 роки тому

    Hey what have you changed with the afm? Spring wise thanks

  • @trollrat4647
    @trollrat4647 2 роки тому +1

    I dream of doing this to my M44 318is. But I cant understand how the stock ecu will work with it. Wont it bug under positive pressure?

  • @alexbabtan2395
    @alexbabtan2395 4 місяці тому

    the fuel rail dripping at 12:59 as he explains how well it all works :))

  • @mikimouse6991
    @mikimouse6991 2 роки тому

    do you have some how do it manual
    or video with whole instalatio of turbo in this engine? And its safe for NA M43b16 engine like pistons and rods?

  • @dreamsun69
    @dreamsun69 2 роки тому +1

    Fellow hellrot compact owner :) love to see it

  • @georgestam1710
    @georgestam1710 7 місяців тому

    I've done something way better for my home build turbo M50. Kept the stock fuel pressure regulator and stock fuel rail, but i fabricated a secondary fuel rail with 3 440 injectors, controlling them through ecumaster det3. That piggy back has a map sensor and injectors start spraying fuel only after atmospheric pressure. Installed the secondary fuel rail right before the throttle body. Its way more safe and easy to tune. I have 12,5 - 13 AFR during wot at 1,5 bar with a Garrett t25.

  • @teodorppetrov
    @teodorppetrov 6 місяців тому

    Could you elaborate more into the exhaust manifold you used? I’m a bit confused!

  • @alexchannel4813
    @alexchannel4813 Рік тому

    I fix one write now u can tell me about the program how u can control the fuel have storm g4?

  • @xx-horror-xx6221
    @xx-horror-xx6221 Рік тому +1

    I living in France an i have this project on a M43B19 105hp , i want introduce a little turbo 0.3 or 0.5bar to gain couple and maybe 30 50 HP on this engine without forge lower motor gearbox ect u think its possible ? And if yes u think possible to place differently an escape too the hole in the hood ? , Really good job on this motor i love that sound ! I love m'y atmo buuut yeah sound good !

  • @adamcarter6245
    @adamcarter6245 11 місяців тому

    The turbo you linked is oil and Water cooled did u look up to coolent ?

  • @TimSlee1
    @TimSlee1 7 місяців тому

    Is a new radiator necessary or does the intercooler do a good enough job at keeping the temps down?

  • @itsmikelake
    @itsmikelake  2 роки тому +7

    Dyno video drops on Wednesday & the results are insane! I’m so fricken impressed with this car haha

    • @n.shiina8798
      @n.shiina8798 2 роки тому +1

      waiting for result. i'm planning to boost my "fragile" N42 for the laugh. how much boost it could take on stock internals do you think? (going to use Eaton M90 instead of turbo)

    • @drmikegaspwred1483
      @drmikegaspwred1483 2 роки тому +1

      i have the same thing m43b16 m50nv valve springs 25psi boost 440cc injectors stock unmodet ecu 1.8l afm tdo413/16t 330whp custom turbo crank trigger wheel slotted to pull 4deg timing

    • @drmikegaspwred1483
      @drmikegaspwred1483 2 роки тому

      ua-cam.com/video/aGwarFD9_CI/v-deo.html

    • @itsmikelake
      @itsmikelake  2 роки тому

      @@n.shiina8798 10psi is always a good level of boost as long as you’ve got the fuel mods to accommodate 😁

    • @n.shiina8798
      @n.shiina8798 2 роки тому

      gotta remap the DME for sure. i used to have billet internals N42 but thing now got inspection hole after the oil pump failed 🤣. considering to boost the stock engine in the future for some fun 😉. maybe upgrade to custom forged internals too for higher boost

  • @DrivenPHPOV
    @DrivenPHPOV 4 місяці тому

    Bro, my temp guage is not working. But i replaced every sensor and wirings were done but still the same. And the fan only kicks in when the ac is on. If the ac is off, then i have no fan. Any ideas?

  • @lesishots812
    @lesishots812 10 місяців тому

    the link of the injectors isnt avaliabe anymore, which ones besides the ones you used do you recommand

  • @DioGaming88
    @DioGaming88 2 роки тому +1

    I just watched both parts and I had to Subscribe 😃. Very impressed with the modifications and the rich content in these videos ,great job 👏.
    I have a E46 318ci N42 and I want to put a turbo in .
    So,your ECU is stock but did you do any modifications, changed anything ,remap ?

    • @currymasterrace7153
      @currymasterrace7153 2 роки тому +1

      n42 is pretty junk to turbo... (I searched for mine and all the people that did it were either with a standalone or with full of strange mods)

  • @voltclan7352
    @voltclan7352 Рік тому

    Does anyone know if I could do this with a m54b22?

  • @lewisearl7678
    @lewisearl7678 7 місяців тому

    Parts list what did u need in terms of ecu injectors ?

  • @willdickson8412
    @willdickson8412 2 роки тому +1

    Can't wait for the Matsuri, going camping for the 2 days. Gonna be sick

  • @pieter6679
    @pieter6679 Рік тому

    what fuel pump did you use

  • @miroslavtsankov5807
    @miroslavtsankov5807 5 місяців тому

    I just picked up an e36 with m44b19. Thinking about turnoing it in the future. Do you guys have some experience with that and any tips/suggestions?

  • @airbranchman7186
    @airbranchman7186 6 місяців тому

    Its the same engine as an e46 right? So in my case i have an e46 318i, should be all same?

  • @juliomartins6570
    @juliomartins6570 2 роки тому

    how much money to do this? did you recomend?

  • @benreeves3777
    @benreeves3777 Рік тому

    I need some manual trans sent to nz! Trying to get my e36 track car moving the auto is so bad 😅😅

  • @yuno3364
    @yuno3364 2 роки тому +2

    First off, great job. love it! Seondly, get a wideband!! :P

    • @itsmikelake
      @itsmikelake  2 роки тому

      Haha thanks! You’ll see in part 2, we took it to the dyno with a wideband to tune it 😇😈

  • @joesephjostar8288
    @joesephjostar8288 2 роки тому

    LETS GOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO ive been loooking for a proper m43 build

    • @itsmikelake
      @itsmikelake  2 роки тому

      I got your back bro 👊🏻💥

  • @thenetworkguy_
    @thenetworkguy_ 2 роки тому +1

    Love the windscreen 😂

  • @user-cr3wb4tc5h
    @user-cr3wb4tc5h 4 місяці тому

    There's no Injectors link please help?

  • @jonathancostantini7189
    @jonathancostantini7189 14 днів тому

    How did you delete the ICV?

  • @djnazgra
    @djnazgra 2 роки тому +3

    Sad that i can't show my mehanic with his e36 318i m43b18 with 320kw from a 1.8.L. dude had 8x evo injectors on that thing. Fuel e85. Was an awesome project. Still wheel spins in 4th gear with 225/40 tires 😅 did get a lot of wins in rally but when the engine died it's now a m50b25 made to a 3.0L with a turbo from volvo if im not wrong.

    • @itsmikelake
      @itsmikelake  2 роки тому +1

      320kw is HUGE power! Love that

    • @djnazgra
      @djnazgra 2 роки тому +1

      @@itsmikelake 4cylinder with 8 injectors 😅 did last like 2 years in races.

  • @markphilipmsandig3139
    @markphilipmsandig3139 7 місяців тому

    Is the build still alive?
    Then what is the side effects after doing it?

  • @mahtynward8236
    @mahtynward8236 Місяць тому

    Gidday gaweez :) wicked stuff. New here and to bmw. Im wondering what parts can i take from m52b28 to increase performance on my m43b18 n/a? If there is anything. Since hearing you used the m50 fuel injectors in. From n.z here sedan auto aswell Both cars are.

  • @Milky-ch5xl
    @Milky-ch5xl 4 місяці тому

    This is good

  • @gavinphillips4014
    @gavinphillips4014 9 місяців тому

    Does this work for 318is?

  • @geraldofrivia5748
    @geraldofrivia5748 Рік тому

    I have a bmw e46 316i 2005 it has 90000 on the clock it’s paint has aged very wel can I do this on my car? If i can I have to do it because it lacks a little power now 😁

  • @monkzeus2238
    @monkzeus2238 17 днів тому

    Link 2,3 and 4 does not exist… does someone can give that products links?

  • @girks
    @girks 2 роки тому

    That dose is amazing haha. So geed for matsuri!

    • @itsmikelake
      @itsmikelake  2 роки тому

      Haha bro, cannot believe this car worked out so well hey. Matsuri is gonna be a fricken blast!

  • @Lizerdbrain
    @Lizerdbrain 3 місяці тому

    No BOV?

  • @perafael1
    @perafael1 2 роки тому +1

    finally someone

    • @itsmikelake
      @itsmikelake  2 роки тому

      Just wait till you see the dyno results 😝

  • @kevintc-r7069
    @kevintc-r7069 Рік тому

    I've been looking for a video like this since I started restoring and planning a turbo for my m42, question though the manifold I am looking to buy has an external wastegate, what kind of turbo would be similar to the gt28 but use an external or would there be a way around it?

    • @itsmikelake
      @itsmikelake  Рік тому

      Weld up the external gate port and you’re good to use an internally gated turbo 😄

  • @teamcnatch
    @teamcnatch 13 днів тому

    Hey this is annoying but im desperately looking for answers at this point and ive seen you have experience with turboing these cars. I've been fighting a misfire in my e36 for almost a year now and at a loss. I've narrowed it down to the fact the car seems to only register the first fuel bank in the ecu as it was previously turboed, I've tried multiple different tuned ecu's, and everything down to the plugs, multiple crank sensors and all that has been had multiple thrown at it. The whole engine harness was swapped as it didnt have front o2's. The timing was off a tooth and just finished getting done.. and it didnt change the problem, let alone change how the car ran at all. Most of that is all back to stock and it still wont show a second bank which causes an odd misfire under max load after a certain duration, if car is turned off the car will reset and the car could drive without issue until it goes under max load again and after a certain duration but the duration seems to get shorter as the car repeats this and gets hot I think i dont know (but for example trying to push the car through an event it seems to come back quicker).

  • @rhysmaccabei5680
    @rhysmaccabei5680 2 роки тому

    Yeeeew This is mad 🤙

  • @MouhammadAlMahdi
    @MouhammadAlMahdi Рік тому +1

    hey bro love the vids when you put the fg injectors did u also max them out or about half?

    • @itsmikelake
      @itsmikelake  Рік тому

      Thanks! Definitely didn’t max them out, plenty of headroom left in them!

  • @meela3066
    @meela3066 Місяць тому

    What’s the guys channel called who built it

  • @adriancastro2904
    @adriancastro2904 4 місяці тому

    CV?

  • @offshore3460
    @offshore3460 Рік тому

    We got the injectors you recommended but they are way to small to fit the injector ports in manifold did you have to make adaptors or use a new bigger oring to fit the 17mm port holes

    • @itsmikelake
      @itsmikelake  Рік тому +1

      Some m43 have weird asf injector ports. Ours didn’t. Bolted straight up. Stupid bmw haha

  • @BITTYBOY121
    @BITTYBOY121 Рік тому +7

    Looks like a great build... but welding the fuel rail whilst it's still on the car seems a bit too dangerous. Stay safe guys and have fun !

    • @itsmikelake
      @itsmikelake  Рік тому +3

      You’re right, that was dodgy as hell haha. Thanks bro!

    • @BITTYBOY121
      @BITTYBOY121 Рік тому

      @@itsmikelake You're welcome bro ! - Great project ! - Best wishes from the UK 👍👍👍

  • @danialfakhouri3149
    @danialfakhouri3149 2 роки тому +2

    Great Job , Q how did you make your turbo manifold any videos ?

    • @itsmikelake
      @itsmikelake  2 роки тому +1

      Jordan’s video will be out soon and will show how it was made

    • @riqbal4026
      @riqbal4026 2 роки тому

      Hey, this is the first video I've watched from Mike, so not idea who Jorden is.
      Do you have any links please

  • @cesarjimenez9318
    @cesarjimenez9318 5 місяців тому

    Update how has she been running

  • @ThirstE30
    @ThirstE30 2 роки тому

    How you checked that the mixture is good so you don’t damage the engine ? I have an m42 and I am looking to boost it on budget

    • @itsmikelake
      @itsmikelake  2 роки тому

      Watch the part 2 video my dude 😁

  • @carloscortez3836
    @carloscortez3836 2 роки тому

    hey man, wanted to put the sc14 on my BMW 325, just need the HYDE MOTOR WORKS V2 plate right?

    • @itsmikelake
      @itsmikelake  2 роки тому

      Yep! Should be sweet with that

  • @Drmstleedwin
    @Drmstleedwin 11 місяців тому

    Shit nvm my first comment lol, was scared to drill my block so I fuck with the sump idea! gonna turbo my m43 in the next few weeks, I’ll post up the videos up on my channel. Thanks for the 4pot e36 content homie

  • @joshwoodbridge3055
    @joshwoodbridge3055 2 роки тому

    What rear housing would you guys go with the T28/?? Cheers

    • @itsmikelake
      @itsmikelake  2 роки тому +1

      Any sr20det t25 will be perfect. Or something of the equivelent size

  • @user-bq9vo3vp2v
    @user-bq9vo3vp2v Рік тому

    Drop link

  • @Diiooss
    @Diiooss Рік тому +1

    Does anbody know if i canuse exhaust maifold from e36 318tds? I read at one forum (witch cant find any more) that is posible becouse its the same block.

    • @erkivinni8707
      @erkivinni8707 Рік тому +1

      Half of the bolt holes don't line up sadly. I tried

  • @TURBOTRISTO
    @TURBOTRISTO 2 роки тому

    Notification gang!!! I want one

  • @that_318ti
    @that_318ti Рік тому

    i have a m44b19 in a 318ti do you think all of what you have done here would apply to my same engine?

    • @itsmikelake
      @itsmikelake  Рік тому

      Yep sure would! Highly recommend a kdfi stand-alone plug and play ecu

  • @adamcarter6245
    @adamcarter6245 11 місяців тому +1

    Sick build bro I have a m44b19 I’m wanting to turbo. Will everything in the description work on mine and also what do I do about mapping as the 318is in the uk came as obd1 so I can’t find anywhere to map it.

    • @itsmikelake
      @itsmikelake  11 місяців тому

      You could always just copy our method instead of mapping! Alternatively you could buy a kdfi plug in ecu which are cheap and awesome!

    • @adamcarter6245
      @adamcarter6245 11 місяців тому

      Are the injectors a straight swap

  • @SimoneMuia-dh7wo
    @SimoneMuia-dh7wo Рік тому

    hi dear Mike, please, can I know how many turbo bars you used (taking into account that the car has the internals of the standard engine, and the high compression ratio) in fact, that scares me a bit, my engine has 150,000km it should be a good foundation, i have the turbo from my s13, i want to use it, it will perform well

    • @itsmikelake
      @itsmikelake  Рік тому

      Stock motor. 10psi. Still running great today after an absolute thrashing

  • @skynet1.044
    @skynet1.044 2 роки тому

    I’m looking into getting an E46 318i, I can get a 6 cylinder but insurance says otherwise atm in UK 🥲 will be following this build, you got yourself a new subscriber!

    • @itsmikelake
      @itsmikelake  2 роки тому +1

      Thanks bro! Honestly, the little m43 has surprised the heck out of us. I didn’t think it would make the power it did, nor feel as fast as it does!

    • @skynet1.044
      @skynet1.044 2 роки тому

      @@itsmikelake Very interested to see the Dyno results next week!

  • @MrRjim
    @MrRjim 2 роки тому

    Will the MAF senson get good reading when it's under pressure, or would it be a good idea to relocate the MAF before the turbo?

    • @itsmikelake
      @itsmikelake  2 роки тому +2

      It’s literally perfect where it is. They’re a very basic mass airflow unit. They have a vane in them that’s just open or closed based on airflow. It works perfectly inline 🤙🏻

    • @perezramon21
      @perezramon21 Рік тому

      How are those maf tuned?

  • @moeybeyrouti2751
    @moeybeyrouti2751 2 роки тому

    ive got my e30 m40 would love to do this always been my dream to do it on it but just need help with doing it

    • @itsmikelake
      @itsmikelake  2 роки тому

      You got this bro. Buy a welder and go nuts! Nothing wrong with learning new skills 👊🏻💥

    • @moeybeyrouti2751
      @moeybeyrouti2751 2 роки тому

      @@itsmikelake cheers bro, quick question what’s the difference with a turbo build like this compared to your friends red e30

  • @Drmstleedwin
    @Drmstleedwin 11 місяців тому

    Where do you get the oil from for the turbo? Do you have to drill the block? Sorry for the newbie question

    • @itsmikelake
      @itsmikelake  11 місяців тому

      Tee off the oil pressure switch 😇

  • @lowridermk2
    @lowridermk2 2 роки тому

    This fuckin cool. You reckon this kinda crude set-up would be as effective on a 325/328/330?

    • @itsmikelake
      @itsmikelake  2 роки тому

      Cheers! Yes we’ve done similar on a 6cyl but it’s not quite as good as the computers are newer / more sophisticated. Luckily the 325/328/330 stock ecu is tunable 😇

  • @thepagani538
    @thepagani538 2 роки тому

    If M43B19 118 horsepower original engine is added to the turbo, is it broken or compatible?

    • @itsmikelake
      @itsmikelake  2 роки тому

      This is an m43b16 that had 50kw before the turbo. So it’s a huge gain

  • @prolosertheatomistic8101
    @prolosertheatomistic8101 10 місяців тому +1

    This is great. Did you guys run into any issues with needing a blow off valve? Or is it better to avoid due to the car using a MAF sensor?

    • @itsmikelake
      @itsmikelake  10 місяців тому

      Blow off valves aren’t needed. They just protect the turbo over a long period of time. We prefer the sound of compressor surge haha

    • @prolosertheatomistic8101
      @prolosertheatomistic8101 10 місяців тому

      Cheers man, thanks appreciate the response. Yeah same, nothing beats that sound.
      I might have missed it in the video but did you guys put a thicker head gasket in? I'm about to jump into doing this to my M44 and although my 318ti is a bit of a beater, I don't have a backup engine so I would like it to be at least a bit reliable. Thinking of going thicker head gasket and ARP head studs.
      Also just wanted to clarify - I wouldn't need a rising rate regulator if I get a custom ECU tune? @@itsmikelake

  • @MrSoneMunze
    @MrSoneMunze Рік тому

    I found a turbo that can provide a total of 255 hp but is it worth it? Like is the engine even going to last in daily drives or it's better to swap my 316i with an M54 engine instead of turbo?

    • @TimSlee1
      @TimSlee1 7 місяців тому

      Sometimes you gotta settle for less power.

  • @itsmikelake
    @itsmikelake  2 роки тому +4

    Part 2 DYNO RESULTS HERE! 🤯 ua-cam.com/video/qTZYVV4YNag/v-deo.html

  • @LGBT_KYS1945
    @LGBT_KYS1945 Рік тому

    Can I put turbo in my e36 318i? It only has 115hp and the engine is in good shape and i dont want to swap but can I add more power?
    Actualy can someone please explain to me how to add power without risk of damage. Im not asking for much just above 150hp.

    • @itsmikelake
      @itsmikelake  Рік тому

      This series explains exactly how to do what you’ve asked. This car is still running well today and he drives the absolute hell out of it!

  • @LuckyDayNaples
    @LuckyDayNaples Рік тому +3

    Awesome work guys!
    I got a 318i e46 with 118 HP M43B19. I’m looking for some boost as the car is a bit slow even for daily driving. I was looking for somwthing about 150-60 HP, so does turboing that a waste for such a low increase? Or it’s best to do a swap in my case?

    • @itsmikelake
      @itsmikelake  Рік тому

      Turbo always!

    • @TimSlee1
      @TimSlee1 7 місяців тому

      Swaps are more complicated and expensive by the looks of it, especially here in Australia.

    • @LuckyDayNaples
      @LuckyDayNaples 7 місяців тому

      @@TimSlee1 What a about car swap? 😂
      My 318 blow up and sold for a 320ci e46 that blow up too. But this time i ended to fix that. This one got 150hp and it’s good for daily. In italy more hp you got, more taxes u pay every year…

    • @TimSlee1
      @TimSlee1 7 місяців тому

      A car swap? Sure, I could pay like 10k more for something slightly more powerful but learning how to turbo/engine-swap would literally be cheaper. Honestly i'm jealous of British people who get these cars so cheap that they whine about the insurance and registration costing more than the car itself. Talk about suffering from success.@@LuckyDayNaples

  • @megadeyutzu92
    @megadeyutzu92 Рік тому +1

    Hi, what fuel pressure are you running to get 170hp on the dyno?

  • @dashfresh3413
    @dashfresh3413 6 місяців тому

    Did you guys tightened up the spring inside the air flow meter?

    • @itsmikelake
      @itsmikelake  6 місяців тому

      Yep! Until it idles nicely

  • @liamdoe5827
    @liamdoe5827 2 роки тому +1

    How’d you delete the idle air control valve? Just take it off and block both pipes? My 318i is running like a dog atm might try it

    • @itsmikelake
      @itsmikelake  2 роки тому +1

      Yep that’s the one. Vacuum leak central. Block off both pipes and you’re good

    • @liamdoe5827
      @liamdoe5827 2 роки тому

      @@itsmikelake Cheers!

    • @kampis13
      @kampis13 2 роки тому

      @@itsmikelake and car is idling ok after idle contol valve delete? And blow off valve is missing?

  • @ahmedmagdy6281
    @ahmedmagdy6281 Рік тому

    This is awesome.
    I have m43b19 can i do this with the automatic gear box?

  • @nasos01
    @nasos01 Рік тому +1

    Very nice work.What's the tune you did on the air/fuel sensor.

    • @itsmikelake
      @itsmikelake  Рік тому

      Tightened the spring a little

    • @paneliro
      @paneliro Рік тому

      @@itsmikelake how did you do it? can you make a vid explain it?

    • @itsmikelake
      @itsmikelake  Рік тому

      @@paneliro The next video in this series explains it? Haha

  • @copperwiring7661
    @copperwiring7661 11 місяців тому +1

    How were you turning the boost up on the fly? Planning on running very similar setup on m42

    • @itsmikelake
      @itsmikelake  11 місяців тому

      Just a simple boost tee 😁

    • @copperwiring7661
      @copperwiring7661 11 місяців тому

      @@itsmikelake cool thanks, did he delete the video on the full video of the build?

  • @iszaccbonnici8749
    @iszaccbonnici8749 2 роки тому

    Might have to throw a turbski on the misses compact now

  • @JoseMartinez-sv1nl
    @JoseMartinez-sv1nl Рік тому

    I think still worth a 2.5 or 2.8 NA inside
    i have hard dudes about what to do in my compact e36

    • @itsmikelake
      @itsmikelake  Рік тому +1

      I'd prefer turbo m43 over NA 2.5 or 2.8 any day!

  • @jujai.akainu
    @jujai.akainu Рік тому +1

    May I know how many HP it’s can get? Amazing!

    • @itsmikelake
      @itsmikelake  Рік тому

      Thanks! All of the info is in the build series 😁