(SS) Service Soon (Flush Heat Exchanger) SS is a time-based service indicator set during installation. See section “3.12 Parameter Settings” for additional details on setting and changing the SS indicator. SS indicates that it is time for service. The heat exchanger should be flushed to prevent damage (refer to section Flushing the Heat Exchanger for more information). Hard water must be treated to prevent scale build-up or damage to the heat exchanger. To reset the SS code, push the On/Off button on the temperature controller 5 times in 5 seconds.
@ just look up the model and buy a new vent and jack, plus cap, all new parts if needed, reprogram and it should work. That's what I did. Cost 358 bucks for the correct parts.
Who do I call for technician in N Calif?
Code 12 but only when one faucet is used. All other faucets it works fine.
I've had the plumber out 3 times for E12 on a brand spanking new exterior Rinnai with no luck. Now what??
I’m getting error 43, it’s not listed on the manual
E-371 what is it?
What about code 55 on a rinnai
(SS) Service Soon (Flush Heat Exchanger)
SS is a time-based service indicator set during installation.
See section “3.12 Parameter Settings” for additional details on setting and changing the SS indicator.
SS indicates that it is time for service. The heat exchanger should be flushed to prevent damage (refer to section Flushing the Heat Exchanger for more information).
Hard water must be treated to prevent scale build-up or damage to the heat exchanger.
To reset the SS code, push the On/Off button on the temperature controller 5 times in 5 seconds.
Some Mexicans cut the pipe and put roof jack on that has a cap. They threw away the oem cap. It doesn't work anymore
I had the same. The roofers replaced the roof and now it wont work
@ just look up the model and buy a new vent and jack, plus cap, all new parts if needed, reprogram and it should work. That's what I did. Cost 358 bucks for the correct parts.