Thanks for your video ! I removed that little blue "water saver" out of the showerhead and it seems like that address the hot cold issue I was getting from the tankless water heater!
hell yeah brother! I got it in step 2. I think the re-pressurization once you turn everything back on is what did it. The first faucet I turned on spat out this brown water and then the water came back on HOT in the whole house.
Really Good. Have a Navien and it just went dark on me. No power to controller. Slight drip from actual Water heater outer casing!! Unplugged, going to open it and see what is leaking, possibly fried the unit?
We have a Rinnai that from time to time stops working after a few minutes. We have no codes and it just reads the 120. It doesn’t happen all the time. We also just had it serviced and the tech said he couldn’t find anything wrong. Any suggestions what our problem is? Thanks
I'd say water savers in your shower heads. Code 12 is a flame out. It was burning then it quit. P1 is low water pressure. So, something is restricting it. check the filter on the bottom of the heater too.
Thank You for video. I have Eccotemp 45 hi - natural gas water heater . Have code E 3. All is OK. Water pressure, gas, vent is clean .. HOW to reset that code.. I Turned OFF power for all day, dont helps. Thanks
It worked for three showers. The water starts hot for about five minutes then goes cold. Then the next day the shower stays hot?I think my tankless is bipolar?
You have NO idea how much the last tip in the video helped. Thank you!!
Thanks for your video ! I removed that little blue "water saver" out of the showerhead and it seems like that address the hot cold issue I was getting from the tankless water heater!
hell yeah brother! I got it in step 2. I think the re-pressurization once you turn everything back on is what did it. The first faucet I turned on spat out this brown water and then the water came back on HOT in the whole house.
It's working again! It was the little filter on the inlet. Thank you for the extremely helpful video👍
Great Video. I now know what I need to do for the maintenance of my Rheem Tankless heater.
Glad it was helpful!
VERY INFORMATIVE... THANK YOU VERY MUCH!!!
Any suggestions on how to fix a fill error on a ruud combi boiler?
Really Good. Have a Navien and it just went dark on me. No power to controller. Slight drip from actual Water heater outer casing!! Unplugged, going to open it and see what is leaking, possibly fried the unit?
Hello did you figure out what the issue was to the controller?
Thank you! Great video and instructions 👌
Is there a reset after flushing out ?
Can’t get water to through it
What about this water heater not turning on at all?
This video has been a big help for me!
Thank you, so much!
Mine - the pressure regulator for the natural gas was stuck. Just tapped the regulator with the handle of a screwdriver and the water heater fired up.
surprisingly that has fixed the problem for me so many times .
Great info. Thank you
We have a Rinnai that from time to time stops working after a few minutes. We have no codes and it just reads the 120. It doesn’t happen all the time. We also just had it serviced and the tech said he couldn’t find anything wrong. Any suggestions what our problem is? Thanks
Water savers in shower heads, something is slowing the flow,
How about error code 52?
It says something about checking the harness for the solenoid.. but what is the solenoid.
It's the gas valve. those don't normally go bad. probably got some corrosion on the connection, unplug it and plug it back up..
I get Code 12, P1, 12, then P1 again. Any idea what that could be?
I'd say water savers in your shower heads. Code 12 is a flame out. It was burning then it quit. P1 is low water pressure. So, something is restricting it. check the filter on the bottom of the heater too.
I get code c7 and 76. What do they mean?
76 is a communication error, I don't know c7 I think that's a clean out code
Thank You for video. I have Eccotemp 45 hi - natural gas water heater . Have code E 3. All is OK. Water pressure, gas, vent is clean .. HOW to reset that code.. I Turned OFF power for all day, dont helps. Thanks
Um, normally turning the power off for a few seconds does the trick. Eccotemp has a tech support number you can call, it's probably really simple.
@@PlumbingSolutionsLLC I DID BEFORE MANY TIMES. Heater was Off all nigh, but stil coming E 3 Code...
Sweet
Thank you!
What about 29? Can I fix it?
That a condensate code. check the condensate drain line.
what is code 24?
that is a bad remote or remote wires
What does code 13 mean?
Indoor unit code normally means you got something in your venting. like bugs or some bird is trying to build a nest. check your vent .
Ok that fixed it thank you
Glad I could help
What is code 1L
How about error 14
We have removed the water savers in the shower heads
Did it fix the problem?
It worked for three showers. The water starts hot for about five minutes then goes cold. Then the next day the shower stays hot?I think my tankless is bipolar?
Nobody seems to know how to solve Eccotemp problems. Best not to buy one.
They have a tech support you can call. I learned what I know from calling various tech supports (not just water heaters) over the past 15 years.
🚀🚀🚀🥬👐