Using General Finishes Gel Top Coat in Satin

Поділитися
Вставка
  • Опубліковано 17 жов 2024

КОМЕНТАРІ • 7

  • @DamnTrue
    @DamnTrue 2 роки тому +3

    Will multiple coats build a heavier finish?

    • @hudsonvalleyvintage5963
      @hudsonvalleyvintage5963  2 роки тому

      Multiple coats will provide extra protection. You do want to be sure you're wiping it back, otherwise it will be too heavy.

    • @DamnTrue
      @DamnTrue 2 роки тому +1

      @@hudsonvalleyvintage5963 Thank you. For subsequent coats, should the full 12-24hr dry time be used for each coat or can additional coats be added at faster intervals prior to a long final coat drying time?

    • @hudsonvalleyvintage5963
      @hudsonvalleyvintage5963  2 роки тому

      @@DamnTrue the Gel Topcoat is oil based so it takes longer to dry than a water based topcoat. I try to wait 24 hours between coats. Between coats I very lightly and quickly sand with a fine grit sandpaper - 220 or higher. Remove any dust and apply next coat.

  • @DamnTrue
    @DamnTrue 2 роки тому +1

    Will multiple coats build?

  • @jparson3309
    @jparson3309 8 місяців тому

    Yes you can put General Finishes water based products over Gel Stain , High Performance or Enduro Var but you will have to wait 24-48 hours. Please read the can 😊