Thanks a lot. Started as a funny add on and ended up making the cut. It’s obvious when you look at my shelf, I love your product line and what you guys stand for.
Thanks for shining the light on another product in this category besides Bilt Hamber, which is something I have been wanting to try out for that mid week washes.
Man, I was just thinking of messaging you earlier but got sidetracked. Haven't seen any new content for awhile. Glad to see your back to making content.
@@HawaiiDetailing Glad to hear Jeremy. Hey, you should look into trying out/reviewing the new Ryobi 18v HP Compact Blower. I bought one months ago. It's not a leaf blower, but it will blow dry leaves with ease. It will aid in drying vehicles. I bought mine for hvac trade, blowing/clearing leaves out and around condensers, jobsite cleanup. It does go through batteries with continuous full power on. You can get the kit right now for $130 at HD.
Cool video! I've been monitoring the Jimbo's Super Soaper for a while. Considering adding it to my car washing arsenal. Again, a cool video, and thanks for posting!
I cant get to try this or stars and stripes out as its not available in my country. Im happy with Bilt Hamber touch-less version 2, being sugar based and I like it doesn't have any corrosive ingredients like caustic soda and salt like most products do unfortunately. It kicks butt. I'm surprised you haven't tried it Jeremy. Its the true OG of touch-less snow foams.
This soap was PH tested and its much higher than 8.5. Did you take a light colored towel or tissue.just to see if it actualy did remove all the dirt? Thats the only way to see.if it really did remove everything. Good video as alway👍
At $69 a gallon, this will NOT be used in my shop. Not to take anything away from this product, it does NOT make good business since. This product may be a higher pH? My higher pH sopa cost $9 a gallon, not ready to switch. Thanks for the showcase...
Sometimes, depending on how dirty, I will add Super Clean with Purple Power. Super Clean cost about $22 for 2.5 gallons. I just trying a new chemical called Dark Fury, it cost about $28 a gallon but highly dilutable, either 10:1 or 4:1? It's Available at O'Reilly's.
Its good, actually kinda top knotch but the price is a bit wild for me. Cant justify using it price per wash wise. If it was cheaper substantially it might jump up to my number 1 cus its that good actually.
I see alot of detailers use a blower to dry a car, but whenever I use my ego 765 I just end up with dry streaks everywhere. I then go back with 3d final touch to clear everything up. What gives? Do I need a true ceramic coating? My cars currently have a paste ceramic coating. Thanks buddy
Try Rinse Off from Adams, its the best water beading/sheeting product Ive tried to far!! You can apply it using a foam cannon and it last a couple of weeks. Make washing the car a breeze and I just drive my car at 70mph for half a mile and dry off a few dripping spots a few minutes after Im back. But again Im using deionized water which you can just leave sitting in the sun and you dont get any waterspots at all.
You don’t need a true ceramic coating, a consumer grade ceramic spray wax will do the trick. I would also use a rinse aid or a wet wax (like from Turtle Wax), and then use your blower (I have a Ryobi 730).
I confirmed that its 12, Jimbo says I tested it wrong meanwhile I have a certified lab . Than he proceeds to tell me that you need to test the foam after you spray it onto the car!! Thats beyond ridiculous, a foam cannon gets you a 10:1-100:1 dilution so thats just trying to get out of something thats way to high to be safe. Near bleach and oven cleaner territory of ph13
Yes that is correct. They tested the PH directly out of the bottle and that is a high PH. Jimbo has already said that the PH drops down once it's out of the foam cannon. So the actual foam on the car will be a PH between 7 and 8 depending on the dilution used.
Wait one sec, ur telling me tht this is officially and soap that does not require u to do a contact wash at all???? I understand if the car is very dirty then u have to contact, do u have to pre wash the car with water first then apply the soap? im a lil skeptical l on this one, I will have to see more.
Spray it on dry. It will remove a good bit of the dirt. Perfect No. Good yes. Those results on my cars were real. No BS. If you have a car full of road scum and nastiness a contact wash is going to have to be done. If you are mid week between washes and want a quick refresh this touchless process will work great. Do not forget that this is also a really good bucket soap also if you go that route. That’s my thoughts at least. Thanks for watching.
Yes sir, just as Jeremy said depending on how dirty the car is you might have to contact wash. I've been using it for a couple of weeks and with 4 oz in my foam cannon I've been able to foam the car being dry, rinse, re foam with the rest of the soap in my foam cannon and contact wash. Soap has worked great.
How much did he pay you to make this review? I tested this product and it does not clean more than if you only spray water at a car, seriously ridiculous to say it works good and the results you’re showing are far from the reality what you get.
1.6 million dollars. A Lamborghini. 2 weeks paid vacation at whistler BC. Oh and a new dirt bike. Hahahaha. $0. That’s what I got $0. All kidding aside these were the exact unedited results I got on my 2 ceramic coated vehicles. There is no miracle touchless wash soap that will clean a filthy vehicle 100% without work. It all depends on the type of contamination on the paint and how long it has baked on there. If it was strong enough to cut through a disaster it would also compromise sealants, coatings and or the paint. This soap did pretty damn good for me. I enjoyed using it and wanted to share my actual experience with it. You should reach out to Jimbo with any grievance you have. I don’t know Jimbo and l have not taken any money from him so I don’t speak for him or his product line. I would NEVER bullshit my viewers for any detailing company. Thanks for watching.
@@HawaiiDetailing Try ChemX Stars and Stripes on a real dirty car. I did one side with the Super Soaper and the other side with ChemX on a car that had been traveling in the rain, and had alot of bugs on it. The SuperSoaper didn’t clean it one bit in my case, and the other side where I used ChemX was perfectly clean. I retried 6 times using the SuperSoaper and it does as good as a Ph neutral Soap , literally nothing without using a Mitt or towel and using a bucket wash method. But Perhaps you having ceramic coated your car and it not being really dirty helped the Super Soaper to look as if it did something. Try using a PH Neutral soap on one side next time and the Super Soaper on the other and maybe you’ll understand. Because I used MegaFoam this last weekend on my truck that has a fresh Ceramic Coat and I was blown away that the first coat of Ph Neutral Mega Foam and just a rinse off took away all the dirtiness, literally just dried it off by driving it down the street and coming back to dry off a few gaps and runs here and there.
@@v8tergt653 I believe you buddy. I appreciate you sharing your experience. I have no skin in the game here. It did work really well for me so that what I showed and shared. I will keep using it and report back with any updates as needed. I usually don’t like too strong of a soap as it does eat at sealants and toppers. There is a sweet spot for each situation and using the right stuff for the right job is key. Thanks for following the channel.
how much are Chem X paying you to promote their stuff? All these products are just guys buying from blenders. No serious Pro or Driveway detailer will pay the money these companies are charging. 109 bucks for stars and stripes because you need that combo! 69 bucks for this soap. Cut out all the middle men and buy from a reputable company that actually formulate the stuff themselves. You should be paying around $15-25 per gallon.
Want more info on this product or any of my recommendations and processes? Check out my website. www.hawaiidetailing.com/touchlesswash
You have the best subscribe pop up on UA-cam
Thanks a lot. Started as a funny add on and ended up making the cut. It’s obvious when you look at my shelf, I love your product line and what you guys stand for.
@@HawaiiDetailing thanks
Thanks for shining the light on another product in this category besides Bilt Hamber, which is something I have been wanting to try out for that mid week washes.
Thanks.
Man, I was just thinking of messaging you earlier but got sidetracked. Haven't seen any new content for awhile. Glad to see your back to making content.
Thanks buddy. I have been busy with life. I try to make videos when I come across good stuff. Will have to step it up again. I appreciate the support.
@@HawaiiDetailing Glad to hear Jeremy. Hey, you should look into trying out/reviewing the new Ryobi 18v HP Compact Blower. I bought one months ago. It's not a leaf blower, but it will blow dry leaves with ease. It will aid in drying vehicles. I bought mine for hvac trade, blowing/clearing leaves out and around condensers, jobsite cleanup. It does go through batteries with continuous full power on. You can get the kit right now for $130 at HD.
Thanks for the tip. I will take a look at it
Cool video! I've been monitoring the Jimbo's Super Soaper for a while. Considering adding it to my car washing arsenal. Again, a cool video, and thanks for posting!
@@chelsabailey1018 thanks for way the channel. I appreciate it.
Wow that foam has meat for sure ! Baaaaaam 😂 great video ❤
Thanks.
Always so well done videos and narration
Thanks. I appreciate the support
That little dog was so cute! And the foam did a good job at pulling off the dirt.🇦🇺
Hahaha. Thanks and yes it did a good job
another banger jeremy. have you tried chem x? my go to for a touchless wash
No. I will have to give it a try
Great video, quick question if you have product left in canon can you put it in an other empty bottle to reused later. Thanks 😊
Yes you can! I have lids and spare bottles for my foam cannons. I put the lid on and it stores well short term.
@@HawaiiDetailing thanks for responding much appreciated
That is a great idea. I’ll have to pick up some lids for my MJCC foam cannon.
I use the Super Soaper here in florida have had great results!
@@Richardlowii thanks for sharing
i love active foam and the smell of it
Great video! Thanks for sharing. I appreciate how you tested the 2 oz too. 👍
Thanks for watching!
Have you tried Optimum Polymer Technologies?? OpT ? Rinseless wash .? I love it . Just wandering your thoughts . It leaves a super slick finish
Love the puppy... So cute!
@@davidburgess176 hahaha. Yeah he is a cool one. Thanks.
Just saw your Tesla charger video from 4 years ago. Holy shit! Looking good man
Thanks man.
Good to see you Jeremy! been a minute!
Thanks buddy.
I cant get to try this or stars and stripes out as its not available in my country. Im happy with Bilt Hamber touch-less version 2, being sugar based and I like it doesn't have any corrosive ingredients like caustic soda and salt like most products do unfortunately. It kicks butt. I'm surprised you haven't tried it Jeremy. Its the true OG of touch-less snow foams.
I will soon for sure. Thanks
You should try the Chem-x Stars and stripes with snake oil!
will do.
I just tried those 3 chem x products on my dad's commercial van after sitting for a month in dirt and can say it works!
i use koch chemie protector wash instead of snake oil
Rocko is awesome!
@@scottturner864 thanks man.
This soap was PH tested and its much higher than 8.5. Did you take a light colored towel or tissue.just to see if it actualy did remove all the dirt? Thats the only way to see.if it really did remove everything.
Good video as alway👍
At $69 a gallon, this will NOT be used in my shop. Not to take anything away from this product, it does NOT make good business since. This product may be a higher pH? My higher pH sopa cost $9 a gallon, not ready to switch. Thanks for the showcase...
What high ph soap did you use?
Yeah pricey but I did enjoy using it. Thanks for watching
Who asked you to use it in your shop?
@@So818cal Purple Power Vehicle & Boat Wash Concentrate, about $9 at Walmart.
Sometimes, depending on how dirty, I will add Super Clean with Purple Power. Super Clean cost about $22 for 2.5 gallons. I just trying a new chemical called Dark Fury, it cost about $28 a gallon but highly dilutable, either 10:1 or 4:1? It's Available at O'Reilly's.
Will you be trying the Clean by pan the organizer line up?
At some point I will want to bring it in and see how it does.
Thanks for the video!
Good soap for sure. Thanks Jimbo
What type of air compressor would you recommend just for blowing your car out and your tires
Which cleaning product do you use to clean auto carpets with the Bissell machine?
@@sandrajohnson2489 here is everything you will need and some good info also. www.hawaiidetailing.com/extractor
How long does resin last in the CR spotless Because I only wash one car per week, my wife’s car and mine
@@gearlstrickland3365 check this out.
ua-cam.com/video/38hsSwZ35HY/v-deo.html
Hmmm interesting, i think that I will get me some of that.
I enjoyed it for sure. Definitely worth trying out. Let me know how you like it.
@@HawaiiDetailing will do my friend.
ALOHA FROM S.W. FL. IN MY CART TO TEST DOWN HERE IN HOTTER THAN YOU KNOW WHAT FL. BTW ROCCO IS A BEAST!!!! CUTE
Awesome. Thanks. Rocco is a cool one.
Babe wake up, another hawaii detail video dropped!!
Hahahaha. Thanks.
Its good, actually kinda top knotch but the price is a bit wild for me. Cant justify using it price per wash wise. If it was cheaper substantially it might jump up to my number 1 cus its that good actually.
Yeah it is a good soap but you are gonna pay. Thanks for watching
have you seen bilt hamber touchless at all? Love to see what you think comparatively
Not yet! will bring it in soon
@@HawaiiDetailing Awesome thank you! love to just see it compared side by side!!
Actually looks pretty good. Gallon price is a bit high.
At 2oz per cannon its pretty affordable and works well too. I agree that the gallon has a higher price but I do think it is worth it
@HawaiiDetailing or even 1oz if you only fill half the cannon up. So the price pr wash isn't too bad by itself.
Yeah. It takes about a half a cannon to do a normal car. I have lids for my cannons so I can save the other half for the next wash.
When are you getting the dual krenzla so you can peel the paint off your cars
Hahahaha. Thats funny
You have to use too much soap in soap canon it’s not cost-effective for the price of the bottle .
Are you not putting out a lot of videos because I’m not seeing them?
@@gearlstrickland3365 I have been busy but I am still making videos and plan to do a lot more soon. Thanks for asking.
I see alot of detailers use a blower to dry a car, but whenever I use my ego 765 I just end up with dry streaks everywhere. I then go back with 3d final touch to clear everything up. What gives? Do I need a true ceramic coating? My cars currently have a paste ceramic coating. Thanks buddy
YES, apply a coating, they are amazing, water will fall off!
Try Rinse Off from Adams, its the best water beading/sheeting product Ive tried to far!! You can apply it using a foam cannon and it last a couple of weeks. Make washing the car a breeze and I just drive my car at 70mph for half a mile and dry off a few dripping spots a few minutes after Im back. But again Im using deionized water which you can just leave sitting in the sun and you dont get any waterspots at all.
Use a drying towel for the majority of your car, then use the blower for the grill, mirrors, license plate area, etc.
You don’t need a true ceramic coating, a consumer grade ceramic spray wax will do the trick. I would also use a rinse aid or a wet wax (like from Turtle Wax), and then use your blower (I have a Ryobi 730).
I saw a video where a guy tested the PH and it was 12.5 opposed to 8. I’m hoping to see different people test it so it can be confirmed or not.
I confirmed that its 12, Jimbo says I tested it wrong meanwhile I have a certified lab . Than he proceeds to tell me that you need to test the foam after you spray it onto the car!! Thats beyond ridiculous, a foam cannon gets you a 10:1-100:1 dilution so thats just trying to get out of something thats way to high to be safe. Near bleach and oven cleaner territory of ph13
Yes that is correct. They tested the PH directly out of the bottle and that is a high PH. Jimbo has already said that the PH drops down once it's out of the foam cannon. So the actual foam on the car will be a PH between 7 and 8 depending on the dilution used.
Jeremy… the coolest cucumber on You Tube. 👍
Thanks man. I appreciate it
How long do you let the foam dwell on your car? Thnx.
as long as possible but do not let it dry. Soap drying on the paint is never good. The actual time will vary based on the conditions where you are.
is this safe for ceramic coatings?
Yes. Both my cars are coated.
@@HawaiiDetailingwait a minute. How does that work, what's the process to ceramic coat a pet 😂😂😂
How long does it take you start to finish trying to be fast?
10 mins? Mix spray rinse and blow dry. Oh and have to put everything away too.
@@HawaiiDetailing 😍
'Bad thick foam' should have been the caption for anyone who knows what a good foam is.
Hahahaah.
@@HawaiiDetailing what's funny? It's fact.
I see you pimp!!!!
Hahahaha
Whats the pH level? Is it Alkaline?
Says 8.5 on the website. I did not test it
@@HawaiiDetailing Thanks for the info! I wonder how the pricing compares to Bilt Hamber and CarPeo Lift.
Wait one sec, ur telling me tht this is officially and soap that does not require u to do a contact wash at all???? I understand if the car is very dirty then u have to contact, do u have to pre wash the car with water first then apply the soap? im a lil skeptical l on this one, I will have to see more.
Spray it on dry. It will remove a good bit of the dirt. Perfect No. Good yes. Those results on my cars were real. No BS. If you have a car full of road scum and nastiness a contact wash is going to have to be done. If you are mid week between washes and want a quick refresh this touchless process will work great. Do not forget that this is also a really good bucket soap also if you go that route. That’s my thoughts at least. Thanks for watching.
Yes sir, just as Jeremy said depending on how dirty the car is you might have to contact wash. I've been using it for a couple of weeks and with 4 oz in my foam cannon I've been able to foam the car being dry, rinse, re foam with the rest of the soap in my foam cannon and contact wash. Soap has worked great.
@@HawaiiDetailing thank u for clarifying tht for me. ill have to give this a try some day.
have you tried superior products?
No not yet
What ph the soap
check out 1:43 Its PH 8.5
According to Jimbo soap should be around 12 to 13, but once diluted and foamed on the car it should drop down to 7 to 8
Test Chem x 😉
🤝
I have some magic beans to sell you.
Hahahaha. Yeah I have a bridge in east Kentucky that’s for sale if you want it for cheap.
Chem x Stars and Stripes dunks on this product….
Stars and Stripes can’t be used on a regular basis though. Has a lot of ingredients that eat up the paint .
@@miggs80 I’ve never heard that. Not from any other user or the owner of the company.
How much did he pay you to make this review? I tested this product and it does not clean more than if you only spray water at a car, seriously ridiculous to say it works good and the results you’re showing are far from the reality what you get.
1.6 million dollars. A Lamborghini. 2 weeks paid vacation at whistler BC. Oh and a new dirt bike. Hahahaha. $0. That’s what I got $0. All kidding aside these were the exact unedited results I got on my 2 ceramic coated vehicles. There is no miracle touchless wash soap that will clean a filthy vehicle 100% without work. It all depends on the type of contamination on the paint and how long it has baked on there. If it was strong enough to cut through a disaster it would also compromise sealants, coatings and or the paint. This soap did pretty damn good for me. I enjoyed using it and wanted to share my actual experience with it. You should reach out to Jimbo with any grievance you have. I don’t know Jimbo and l have not taken any money from him so I don’t speak for him or his product line. I would NEVER bullshit my viewers for any detailing company. Thanks for watching.
@@HawaiiDetailing Try ChemX Stars and Stripes on a real dirty car. I did one side with the Super Soaper and the other side with ChemX on a car that had been traveling in the rain, and had alot of bugs on it. The SuperSoaper didn’t clean it one bit in my case, and the other side where I used ChemX was perfectly clean. I retried 6 times using the SuperSoaper and it does as good as a Ph neutral Soap , literally nothing without using a Mitt or towel and using a bucket wash method. But Perhaps you having ceramic coated your car and it not being really dirty helped the Super Soaper to look as if it did something. Try using a PH Neutral soap on one side next time and the Super Soaper on the other and maybe you’ll understand. Because I used MegaFoam this last weekend on my truck that has a fresh Ceramic Coat and I was blown away that the first coat of Ph Neutral Mega Foam and just a rinse off took away all the dirtiness, literally just dried it off by driving it down the street and coming back to dry off a few gaps and runs here and there.
@@v8tergt653 I believe you buddy. I appreciate you sharing your experience. I have no skin in the game here. It did work really well for me so that what I showed and shared. I will keep using it and report back with any updates as needed. I usually don’t like too strong of a soap as it does eat at sealants and toppers. There is a sweet spot for each situation and using the right stuff for the right job is key. Thanks for following the channel.
how much are Chem X paying you to promote their stuff? All these products are just guys buying from blenders. No serious Pro or Driveway detailer will pay the money these companies are charging. 109 bucks for stars and stripes because you need that combo! 69 bucks for this soap. Cut out all the middle men and buy from a reputable company that actually formulate the stuff themselves. You should be paying around $15-25 per gallon.