Honda Lawnmower HRR Series Carburetor Replacement Model HRR216K10VKAA
Вставка
- Опубліковано 30 вер 2024
- #diy #lawnmower #honda #carburetor #hipadiyrepair #hipaparts #fixed #smallengine #hondaengine
This video walks you through how to change out a carburetor on a Honda HRR series push mower. It walks you through the process step by step and provides clear instruction so you can complete this repair on your own with minimal down time! Links below on where to buy the tools and parts you see in this video! If you have any questions please reach out in the comments section and I'll get back to you ASAP! Thanks for watching, have a great day! Visit the HIPA store at:
hipastore.com/
(Paid Links)
Link to buy carburetor kit shown:
amzn.to/3RfV22D
Link to buy 10mm socket set:
amzn.to/3RfOpgy
Link to buy needle nose pliers:
amzn.to/3Va7sdE
Thomas Betty Thompson David Moore George
Thanks for sharing!
16:55 that’s the auto choke part, there is a part that can easily fall out that sets the choke. Just thought I would mention this. Without that part it will not start
You make this look simple 😊
Thank you for mentioning that! Thanks for watching and for the comment! Glad I made it look easy haha. Have a great day!
Is this the same thing for the K9 as well?
What's the exact model you have?
I have an HRR216k9VKAA
@@jordansmith4775 The process to replace should be very very similar but the part listed may not fit. Here's a link for one that I found that includes your model number. (paid link)
amzn.to/3AFk8CK
Let me know how you make out with the repair!
Hey guys! Let me know if this video helped you out and what you thought of this repair! If you have any questions please reach out here and I'll get back to you ASAP! Links below on where to buy the tools and parts you see in this video! Thanks for watching, have a great day!
(Paid Links)
Link to buy carburetor kit shown:
amzn.to/3RfV22D
Link to buy 10mm socket set:
amzn.to/3RfOpgy
Link to buy needle nose pliers:
amzn.to/3Va7sdE
GREAT video Link to the parts was really helpful Thanks
@billy5082 thanks! Glad the video and links helped you out!
Great vid, but where might the metal spacer (same size as 3 hole gasket) go? Or does it matter? Thx again.
There is one gasket that goes behind the carb and one that goes in front. I believe the one that comes off is metal but that replacement is just a normal gasket
I ordered the same carburetor and it won’t stay running. I notice that the old carburetor and the new one have different black components on the top. I don’t have and rods going to that to control the valve.
What model is your mower? It took me a few pulls with the new carburetor but after it started initially it didn't give me any trouble.
@@fixanythingsavemoney hrr216vka
So it will start without a problem but then only run for a few seconds? It could be a couple of things. Maybe the bolts aren't tightened enough in the air filter housing, air filter may not be installed correctly, or if the gaskets aren't on correctly or you accidentally missed a hole when putting the bolts through the gaskets this may cause it to start and then not run. Was it doing this before you put the new carburetor in? I would check all of those things and let me know what you find! Hope you get the issue resolved soon!
That is really great video. I have the same model and it keep cutting out on me. So I changed the spark plug filter and oil. Its working and not cutting out on me but it is making a chugging noise. i did lose a plastic round piece on the muffler. So I don't know if that's the reason for the noise or the carburetor. So I am think about cleaning the carburetor on it. Thanks for the video it is pretty great and in detail.
You're welcome! Thanks for watching and for the comment! Have a great day!
there's a 10mm bolt on the bottom of the carb. Take it out and drain the fuel in the bowl. There may just be a little water in it.
Thanks for the suggestion!
@darc262 Thanks I really appreciate it. I have to give that a try.
Let me know how you make out!