Hi John, I am absolutely busting to see your final four issues of the Titanic. It has been a month since stage 136. It must be getting close. I am at stage 110. I follow your videos with great interest every month. They provide me with a great insight into what I can expect as my build progresses. Excellent Stuff!! Greetings from Canberra Australia......☺
when you did the light n function test with all the decks in place, the enngine room lights trully bring the engine room to life especially when you see the engines running...and the lights on the deck are trully unbelievable, can't wait to start my build
John my friend and anyone else who is having problems with the display case. This case is a narrower than the Bismarck's case. Hence the tabs that go into the slots are a lot closer to the edge of the Acrylic. I cannot stress enough that do not force the top on, otherwise you will have problems with the slots snapping. One remedy for this is to either file the slots a little bigger or use like a silicone grease or vaseline to ease the top on, if you try to take the top off by force I can see the slots recieving the tabs easily breaking. Hopefully this message will prevent any damage. Good luck. Thank you John, got my base today and saw the difference immediately between the Titanic and the Bismarck's cases, but they are exactly the same thickness, but the slots just closer to the edge.
Hi John i am so impressed with the closing stages of this beautiful build it's almost finished after a couple of years thank god lol i really don't want it to end but like all stories there has to be a ending. Great job John the steam was amazing wasn't expecting that. 👍
Wow, great video, again and always! I was really looking forward to the installation of the chimneys, and it's nice to see this wonderful model together. I've been building it since last summer (I'm at issue 89) ordered from abroad (it also started in Hungary a month ago :D ), and your videos have helped me a lot, John! I can't wait for the final numbers.
Been waiting to see the funnels finally working, same sort of action as an air freshener so you may fine you should not run them for too long as they tend to burn out. But looking fantastic now John 👏👏👌👌
Well done John 👏. She looks absolutely splendid, and at least i know whats to come next month with the sheer line, that was a very nice 4 videos, and the steam, you could set up your own sauna John 😂 and nice to know engine room lit. Thank you John. Take care.
I found out more info about this series getting extended, while the Titanic is finished at issue 140, issues 141 to 190 will be a stand alone engine. This info was sent to Australian suppliers.
Hello friend John, magnificent work. I can only say that the result is excellent...there is very little left to finish this amazing model. In Spain the subscription is long delayed. I'm still on number 76, when I should be on number 91... Anyway, I hope one day to see my Titanic like yours. Regards.
On top of the deck between the 2nd and 3rd funnel in the middle of the deck there's something missing it's like you climb up ladders and stand there's 4 corner bits where something sits on do you think they forgot about it or are we getting that in the end
HI John, Looking great but sadly the remote does not work. I can only think that either PCB in the remote or the main one in the hull is faulty. Aaprt from ordering replacement issues containing them can you think of a way to test them?
Parece que no pero si que quedan detalles que añadir, me intriga cómo va a ser la colocación de las barandillas, he estado hoy en una exposición interactiva del Titanic aquí en Madrid, he estado muy bien pero como la de Belfast no creo que la supera nada, había una maqueta del Titanic creo que un poco más grande que la que estamos haciendo pero poco más y tenía todo lujo de detalles, sus”remaches” los botes salvavidas llevaban sus remos, muy muy detallado, pero sin luces ni nada, lo que no tiene uno lo tiene el nuestro y bicebersa, ánimo amigo, ya lo tienes, quizás esta colección hubiera bastado con 100 números pero la han querido alargar más de la cuenta
Hi john where can I get a power adaptor the batteries won't last long I got a power pack for the terminator just wondering if I can get one for this model
Thanks you for all your comments, watch time and for enjoying this video.😀👍
Greeting from Athens ….just finished number 20….can’t wait for the future.
Thanks for all the great videos
Hi, thanks for watching 👍 😊
Thanks John!
Hi John, I am absolutely busting to see your final four issues of the Titanic. It has been a month since stage 136. It must be getting close. I am at stage 110. I follow your videos with great interest every month. They provide me with a great insight into what I can expect as my build progresses. Excellent Stuff!! Greetings from Canberra Australia......☺
They should be with me any day now. Thanks for watching 👍
excellent build John she,s looking fantastic, nice to see the smoke coming out of the funnels and everything else working, brilliant vid
Thanks Dave 👍 lots of detailing to complete the beautiful lady now.😀
when you did the light n function test with all the decks in place, the enngine room lights trully bring the engine room to life especially when you see the engines running...and the lights on the deck are trully unbelievable, can't wait to start my build
She does look brilliant. Have a great time building her. 😀👍
Wonderful to hear the old lady's voice!
She's in a good voice. 👍 😀
John my friend and anyone else who is having problems with the display case. This case is a narrower than the Bismarck's case. Hence the tabs that go into the slots are a lot closer to the edge of the Acrylic.
I cannot stress enough that do not force the top on, otherwise you will have problems with the slots snapping.
One remedy for this is to either file the slots a little bigger or use like a silicone grease or vaseline to ease the top on, if you try to take the top off by force I can see the slots recieving the tabs easily breaking.
Hopefully this message will prevent any damage. Good luck. Thank you John, got my base today and saw the difference immediately between the Titanic and the Bismarck's cases, but they are exactly the same thickness, but the slots just closer to the edge.
Great advice Phil. Thank you! :)
Hi John i am so impressed with the closing stages of this beautiful build it's almost finished after a couple of years thank god lol i really don't want it to end but like all stories there has to be a ending. Great job John the steam was amazing wasn't expecting that. 👍
Thanks, Rod, 👍 I can't wait to finish her now. there are lots of finishing touches to add and then sit back and admire her. 🙂
Wow, great video, again and always! I was really looking forward to the installation of the chimneys, and it's nice to see this wonderful model together.
I've been building it since last summer (I'm at issue 89) ordered from abroad (it also started in Hungary a month ago :D ), and your videos have helped me a lot, John! I can't wait for the final numbers.
Thanks for watching 👍 Good luck with your build 😀
Been waiting to see the funnels finally working, same sort of action as an air freshener so you may fine you should not run them for too long as they tend to burn out. But looking fantastic now John 👏👏👌👌
They only last for 90 seconds, the same as the whistle, but they look great. Thanks for watching Peter. 👍
Looking brilliant
Great video and build as always John.
Thank you 👍
Well done John 👏. She looks absolutely splendid, and at least i know whats to come next month with the sheer line, that was a very nice 4 videos, and the steam, you could set up your own sauna John 😂 and nice to know engine room lit.
Thank you John. Take care.
Thanks Phil. She does look great. Take care 🙂
Great build and vid 🍺👍💪💞🙏
Thanks Eddy 👍 😊
Wow! That's crazy! Well done, John.
Thanks 👌 😊
Nice video John, 4 more numbers and you're done 😁😁😀
Thank you 👍 😊
@@JohnsModelmaking you are welcome 😁
Saludos desde México! We are just starting with the Titanic (at that time fascicle 3) but how incredible that you are so close to finishing it.
Thanks, you will have a great journey, my friend. 😉
Nsarly there.👍 😊 Have a great time building her. She's a pleasure.
John, I don't blame you Pal! Because I'd be playing with this bad boy all night!
👍😄
Excelente trabajo😊
😀👍
Brilliant I’m 10 issues from this stage can’t wait . Love your channel as a fellow UA-camr , keep the good work mate 🤛👍
Thanks 👍
Evening John the ship is looking amazing what will be the next build you will do 👍
Evening Peter. I have just started the Ford Falcon and will now wait and see what Hachette release next. I wouldn't mind the Graf Spee. 😀
Very beautiful 🤩🤩🤩🤩👌
😉👍
I found out more info about this series getting extended, while the Titanic is finished at issue 140, issues 141 to 190 will be a stand alone engine. This info was sent to Australian suppliers.
Interesting, I wouldn't mind that myself. 😀
Hi John, can't get the whistle and sos to work, it was but not now, the smoke is working OK, thanks
That's a strange one, new batteries required? 😀
Sa sent la fin de notre belle aventure 😜😜😜
Thanks, nearly there.😀
Hello friend John,
magnificent work. I can only say that the result is excellent...there is very little left to finish this amazing model.
In Spain the subscription is long delayed. I'm still on number 76, when I should be on number 91... Anyway, I hope one day to see my Titanic like yours.
Regards.
Hi, thanks for your lovely comment. I hope it gets back on track for you soon. Have a great build 😀 👍
Bonjour John
bravo pour les vidéos, pourriez vous me dire svp la référence de la peinture jaune pour les grues ?
merci beaucoup
Alex
Lufthansa yellow silk matt Revell 310. :)
Maravilloso
Thanks 👌 😊
On top of the deck between the 2nd and 3rd funnel in the middle of the deck there's something missing it's like you climb up ladders and stand there's 4 corner bits where something sits on do you think they forgot about it or are we getting that in the end
It will be in the last 3 issues. 😀👍
@@JohnsModelmaking I see thought they forgot to add it in
@@zL-Clark Compass platform will be in the next issue
HI John, Looking great but sadly the remote does not work. I can only think that either PCB in the remote or the main one in the hull is faulty. Aaprt from ordering replacement issues containing them can you think of a way to test them?
Does the remote power light come on? 🤔
@@JohnsModelmaking Yes, but when I press the buttons the lights, sounds and props don't work
@@Whistlemike If you made all the checks for power to the ship, via batt or USBC, tel Hachette and they will advise you. 😀
@@JohnsModelmaking thanks.
Excellent Job! Fantastic! Great! I hope it will be the same for me in July 2027... 😁😂
Thanks 👌 😊 have a great build 👍
Parece que no pero si que quedan detalles que añadir, me intriga cómo va a ser la colocación de las barandillas, he estado hoy en una exposición interactiva del Titanic aquí en Madrid, he estado muy bien pero como la de Belfast no creo que la supera nada, había una maqueta del Titanic creo que un poco más grande que la que estamos haciendo pero poco más y tenía todo lujo de detalles, sus”remaches” los botes salvavidas llevaban sus remos, muy muy detallado, pero sin luces ni nada, lo que no tiene uno lo tiene el nuestro y bicebersa, ánimo amigo, ya lo tienes, quizás esta colección hubiera bastado con 100 números pero la han querido alargar más de la cuenta
Great video again John how do you refill the water tanks
Thanks 👌 hopefully with little difficulty 😄
When do we attached the decks to the hull and how is it done thanks
Stage 122, you can watch my deck placement video in my Titanic playlist.😀
Hi! When will the last package arrive?
Its late, so could be next week! 🙂
can you control the smoke it looks way too fast to me
No, it stays on for 90 seconds. 😀
Hi can tell me what the grey paint you isplease
Hi, I haven't used Grey paint. :)
Hi i use a pin strip from a auto shop for the yellow line
👍😀
Super super john😊😊😊😊😊
Thanks Frank :)
Hi john where can I get a power adaptor the batteries won't last long I got a power pack for the terminator just wondering if I can get one for this model
I use a power bank, Amazon sell them. USB connection and can be charged via a pc or 5v phone charger. 👍
Can you not use a phone charger which goes into the mains
What you use is up to you. 👍
I've seen the contents of last issue and there's still no chains to finish off the foredeck, disappointed with that
That is disappointing 😞
Just prey all my electrics work engine lights steam 🤞
is there no photo etch handrails?
Not yet. 👍