KTM 790 Adventure R Controls Set up Tips

Поділитися
Вставка
  • Опубліковано 16 гру 2024

КОМЕНТАРІ • 31

  • @MOTOTREK
    @MOTOTREK 3 роки тому +14

    03:12 Your clutch free-play measurement is wrong. According to KTM's repair manual, the 5mm is measured at the outside end of the lever (near the bar end) not the inside end (near the hinge.) Your free-play as shown is much too loose.

  • @dahveed284
    @dahveed284 4 роки тому +1

    I'm glad I watched this. I had adjusted all the play out of my clutch. Heading out to the garage to make it about 5 mm.

    • @UPSHIFT_ONLINE
      @UPSHIFT_ONLINE  3 роки тому +1

      Glad you caught this. Hope you are enjoying your bike.

  • @ayhanylmaz5155
    @ayhanylmaz5155 Рік тому +1

    Thank you for this beautiful and info video. It will be of great help to me.

  • @ryanbraun2000
    @ryanbraun2000 4 роки тому +1

    Wow, all your videos on the 790 are awesome. Big help. Thank You!

  • @onesharpboradhead
    @onesharpboradhead 4 роки тому +1

    I have a 790 R and I have to say that the service manual is the most disorganized and confusing manual I have ever read. How about a video on the COMPLETE first service (620 mile) recommendations and a video on how to adjust the chain tension - because the manual and the info on the bike itself is very confusing. Since, at least here in he USA - KTM dealers are few and far between - (for me the closest is 4.5 hours away), it would sure be nice if they had a clear and easy to read service manual.

  • @rso1411
    @rso1411 4 роки тому +2

    David, I really appreciate your videos. I got my 790 R Rally ... let me see, how long ago was that..... two days ago. I am watching all your videos and they are so helpful.

  • @russellhegler3164
    @russellhegler3164 4 роки тому +4

    Are you sure about the shifter adjustment? When you turn the adjustment rod it moves the shifter not the shifter shaft so the sensor should stay aligned. However if there is a bunch of mud or extra friction on the shift lever pivot point it may me possible to misaligned the sensor but it will realign after the first shift.

    • @galuhrichata6148
      @galuhrichata6148 4 роки тому

      Russell Hegler That makes sense, Bro...👌👌

    • @hamish3766
      @hamish3766 2 роки тому

      He's wrong re the shift adjustment, so much bad info online

  • @george1984
    @george1984 Рік тому +1

    Great point!!

  • @thomasstahl2499
    @thomasstahl2499 Рік тому +1

    Thank you for the great info

  • @fabienpics
    @fabienpics 11 місяців тому +1

    Hi, very well made video INFORMATION. 👍

  • @frankpusch4616
    @frankpusch4616 11 місяців тому +1

    Do you think you get all dirt / metall parts / loktite out or do you thing there are is still dirt left after draining the oil? Any experience?

  • @princekhut
    @princekhut 3 роки тому

    Thanks so much for the video!! Big help!

  • @TWPeeps
    @TWPeeps 4 роки тому

    Anyone have a video on the 790 adventure tank removal?

    • @UPSHIFT_ONLINE
      @UPSHIFT_ONLINE  4 роки тому +1

      It's on our list but we haven't gotten to it yet.

  • @onesharpboradhead
    @onesharpboradhead 5 років тому

    I have one on order for spring. Do you recommend additional crash protection for the bike - ie a stronger skid/bash plate, crash bars, etc... or is the bike protected enough right from the factory. I ride ATV trails, many of which have lots of softball size rocks. Thanks

    • @UPSHIFT_ONLINE
      @UPSHIFT_ONLINE  5 років тому +2

      We always opt for stronger than factory crash protection when available. We are running the Outback Motortek bars and skid plate on our 790.

  • @george1984
    @george1984 Рік тому +1

    Great

  • @giuliobuccini208
    @giuliobuccini208 5 років тому +3

    Too clean and tidy garage. May I came and work there for one hour? You will see the difference and get more credibility! 😆

    • @UPSHIFT_ONLINE
      @UPSHIFT_ONLINE  5 років тому +2

      It's KTM's education center. They keep it pretty tidy.