The firmware updates over the last day or so have greatly improved my gimbal tilt issues. This has been my biggest problem. And it looks like they also addressed my other issue with my P4P. That problem caused the P4P to climb and go into a hover when RTH is engaged when flying into a bright sun that is low in the sky. I guess the P4P sensors think the sun is a object that it can not fly over.
my USB dosent detect the drone ..what i did wrong ? can you help me shortly out, thanks - edit: i checked that specialy for phanom 4 there is another Asisstant only for P4 series, thank you !
I just got my Phantom 4 Pro V2.0 This an excellent video on the process. One question: When I hooked mine up and checked...it showed me to have the latest firmware. So, how would I have disconnected properly? When I pulled out the USB a tab popped on my computer telling me I did not disconnect properly. No damage was done...the drone flew nicely Just not sure of how to disconnect properly.
Thanks. Another question if you don't mind. Your videos look awesome. I'm just getting started using final cut Pro X What do you use? Any aftermarket plug ins?
Don Fitger battery that is currently in drone will update automatically during update, after updating, you need to place the second battery into drone. Look on the the top of the go app and it will ask you to do another update if needed.
My update was interrupted even my battery was 100 %, now there is no connection anymore with the remote neither with the iPad , is any way I could fix that at home? Without sending the drone somewhere? Thank you in. Advance
Try binding the remote with drone by pressing the led button on drone and go into menu on go app and look for binding, follow on screen instruction to rebind the remote to drone.
sorry for my bad english... yesterday i have update my p4p firmware.. after finish my p4p stoping at 30m distance and the all led are show red... please help my problem... thanks for the response...
Hello! I finished playing with the remote control of my P4P+. experimented with installing applications and accidentally erased recovery.img file via ROM installer program. this file is responsible for reboot when flashing, for example. now I can not flash the remote, do not reset to the factory settings. could you send me the original recovery.img file? thanks in advance. Mark
As anyone experienced any issue with the new iOS firmware update? I can't see the camera anymore on my iPad Air 2, but the light next to the SD card slot on the Phantom is blinking red. ???
hi everybody , i want only to share what i encounter to my P4P . if i recorded a video when i flying its only consumed approximately one battery and the next battery i fly again it appear in the screen the videos memory card is full , actually i put 32gb how comes it easily full , kindly help me to solve this problem. thank you
Nothing I have seen about uggrades to pro plus phantom 4 on youtube makes any sense. I am told by the controller Plus unit that updates are required, but on touching the screen it just goes to nothing. On downloading dji assistant 2 to my PC it doesnt look anything like what you show in your video, just a technical toolbox of things to change in the programming. The copter flies ok without downloading anything, why should any product be this complex? I am a pro photographer, I rely on this to make a living, and had hoped I was buying something I could use. I use plenty of programs in my work but having to rely on gossipy geeks to service a work tool really is no good. Next stop DJI, but if they are anything like they sound it's going to be gruesome
I’m very glad to have a community of helpful operators out there to share knowledge that DJI should be. They should pay you for this.
This was a great help for me. i just got my phantom 4 pro and taking the time to make sure I do everything right before operating it.
Mark D. Falcone your welcome sir.
thanks for sharing! I've got Assistant 2 downloaded and will update my bird this week using this particular method. Thanks for the walkthrough!
Thanks for this excellent video. It was very clear and easy to follow. I appreciate you devoting the time to do this.
Very big thanks to you for sharing this video. Your video is very helpful for me I solve my problems. 👍
The firmware updates over the last day or so have greatly improved my gimbal tilt issues. This has been my biggest problem. And it looks like they also addressed my other issue with my P4P. That problem caused the P4P to climb and go into a hover when RTH is engaged when flying into a bright sun that is low in the sky. I guess the P4P sensors think the sun is a object that it can not fly over.
In this video you explain each and everything very neat and clean Lee this video is a great video for me.
my USB dosent detect the drone ..what i did wrong ? can you help me shortly out, thanks - edit: i checked that specialy for phanom 4 there is another Asisstant only for P4 series, thank you !
i have problem with update from my phone, thank you for your tutorial so i can update with DJI assistant :)
Thanks for the help..Great Video.
And if the Phantom 4Pro will not acknowledge in the Assistant software?
Update through the app.
I just got my Phantom 4 Pro V2.0 This an excellent video on the process. One question: When I hooked mine up and checked...it showed me to have the latest firmware. So, how would I have disconnected properly? When I pulled out the USB a tab popped on my computer telling me I did not disconnect properly. No damage was done...the drone flew nicely Just not sure of how to disconnect properly.
Jim Hudek you are ok, that is normal
Thanks. Another question if you don't mind. Your videos look awesome. I'm just getting started using final cut Pro X What do you use? Any aftermarket plug ins?
Jim Hudek cyberlink
Thanks for the walkthrough
You are welcome
Hey bro I do this and it won’t find my drone any ideas ? Sayin no transmission signal tryed all sorts
Thanks! excellent!
Hey, thanks Miles! :-)
I didn't have my remote on when I did my update.. should I downgrade and re-update with the remote on?
Great video 👍
907nvl Thank you
hi there I didn't see you calebrate this time can you tell me why
How do I update the extra battery I have? Much appreciated if you could help me out, thanks.
Don Fitger battery that is currently in drone will update automatically during update, after updating, you need to place the second battery into drone. Look on the the top of the go app and it will ask you to do another update if needed.
I havent seen firmware updates for the p4p for ages :(
Thank you for info
Great effective.
Was there a reason why you only showed how to update the bird, and not the remote??
This is DJI lastest firmware update for the bird only, i do have a video with the remote which was dji second version.
here is the link to that video ua-cam.com/video/RqBpiBmD08E/v-deo.html
My update was interrupted even my battery was 100 %, now there is no connection anymore with the remote neither with the iPad , is any way I could fix that at home? Without sending the drone somewhere? Thank you in. Advance
Try binding the remote with drone by pressing the led button on drone and go into menu on go app and look for binding, follow on screen instruction to rebind the remote to drone.
Hey Bro..Is there a preference to either upgrading via DJI Go4 app or Assistant 2?
Just personal preference, i prefer the app method personally.
Did you update your bird yet?
Done. and batteries too.
sorry for my bad english...
yesterday i have update my p4p firmware..
after finish my p4p stoping at 30m distance and the all led are show red...
please help my problem...
thanks for the response...
Hello! I finished playing with the remote control of my P4P+. experimented with installing applications and accidentally erased recovery.img file via ROM installer program. this file is responsible for reboot when flashing, for example. now I can not flash the remote, do not reset to the factory settings. could you send me the original recovery.img file? thanks in advance. Mark
I am facing an issue flickering I bought it two days back
When I was recording only flashing the video some tines
can i use the dji intergrated display with phantom 4?... will it work?
stormblastmedia F From what i have gathered, no.
As anyone experienced any issue with the new iOS firmware update? I can't see the camera anymore on my iPad Air 2, but the light next to the SD card slot on the Phantom is blinking red. ???
Did you just update the bird
Quadcopter Land no, but I did try to reinstall it, but that didn't help at all.
By the app or assistant 2
By A2
Hold tight, about to upload a fix video for this mess Dji created
its Taking More Than 1 Hour ... ? Normal ?
It can sometimes, that why i stress on having a fully charged battery.
Did you finish the update on your P4P
Mine got stuck at 94% and just stayed there, the bird itself rebooted and everything but on screen it was still at 94%
hi everybody , i want only to share what i encounter to my P4P . if i recorded a video when i flying its only consumed approximately one battery and the next battery i fly again it appear in the screen the videos memory card is full , actually i put 32gb how comes it easily full , kindly help me to solve this problem. thank you
Bhai yhe DJI asaattion download kese kre
thankyou
Nothing I have seen about uggrades to pro plus phantom 4 on youtube makes any sense. I am told by the controller Plus unit that updates are required, but on touching the screen it just goes to nothing. On downloading dji assistant 2 to my PC it doesnt look anything like what you show in your video, just a technical toolbox of things to change in the programming. The copter flies ok without downloading anything, why should any product be this complex? I am a pro photographer, I rely on this to make a living, and had hoped I was buying something I could use. I use plenty of programs in my work but having to rely on gossipy geeks to service a work tool really is no good. Next stop DJI, but if they are anything like they sound it's going to be gruesome
B