How To Install Floor Screeding, Tel: 0161 883 3070, Nationwide Floor Screeding
Вставка
- Опубліковано 13 жов 2024
- Please visit our website: www.floorscreed...
How to install floor screeding. Installing floor screeds to either SR1, SR2 or SR3 surface regularity requires a professional contractor to undertake the screed laying. The floor screed levels need to be ascertained from a pre-set datum which is often provided by the main contractor however screed levels can be ascertained for example from a door threshold and followed through the floor screed area using a laser level set to datum. Screed battens are formed using screed material that has been pre-fixed into position and to datum height. Floor Screeding bar/edges are placed between the two batten points and manoeuvred backwards. The floor screed material is then thoroughly compacted ensuring high density is achieved within the floor screed itself. All Interior Screed Ltd's floor screeds are then wood float finished to even out the floor screeding material and this is then followed by steel trowelling the floor screeding allowing the cement contained within the floor screed to rise to the surface of the floor screed closing of the floor screeding surface. Interior Screed only carry the best floor screeder's in the business. We take great pride on delivering the very best floor screeds time after time. Providing floor screeds Nationwide since 2010 we have two offices based in Manchester: 0161 457 1680 and Warwick (HQ): 01926 679 603
A dying breed, this guy is a tradesman. Great work
Hard graft, and he's been taught by the best, well done fella.
Amazingly done mate!! Enjoy abit of screeding but this is on another level... im a time served resin floor layer but I can honestly say this finish is up there with the best I've ever seen!! Keep it up mate
He's learning the trade well, at 27 years old I'd have that floor finished in about 3 hours , those days are over but boy they were fun (-:
Glad to see he is wearing a reflective vest. Most people would overlook this step and then the concrete won't cure properly.
I keep telling the finishers that, they just laugh at me. LOL.
is outside the door a site?
Lol. Was wondering what that was about too!
LOL
Its screed not concrete
I personally have done this method for many years and still do it, this is the mark of a true tile guy, if you can't do a large drypack job your not a top notch tile guy, this is further proof to all you guys on here pouring mud pans with way overly wet mud that it's wrong to do it that way, drypack is the only way. You should pay attention to this Mr Starr tile
@ Jason, lol. +you're right about Starr Tile... his mud is way too wet
Starr tile guy doesn't have a clue...
Jason Morgan ,haha I've seen mr Starr videos too , doesn't take much to make a pan fail huh (-:
Im guessing by your stupidity your a North American, this is a company from UK and this is all they do, they are not tilers!!!.
And for the record this is ancient practice most clients prefer to pay a little extra for liquid screed ( Not mud). You guys are so far behind in construction its frightening.
You build houses out of wood just to be blown away from a strong wind, bonkers
wow...beautiful job. i love watching professionals doing it the right way.
Made that a lot more work than that ever should be. There are machines these days that help you know.
Most of the time i do this with another guy, we take it in turns as it is very physically demanding when doing large open areas. This guys a beast though
My dad screened all over London n d 60s n 70s n this lad knows his trade.
Screened????
@@smackflack5771sorry Sigmund Freud screened.
@@smackflack5771 sorry mate I'm an Irish illiterate.
highly skilled tradesman, very impressive, well done
This guy is a beast. A true talent right there
With all that mortar down, you have to be quick. Tough job but someone's gonna do it. Good work!
J Rod gg Ja
I can’t speak English very well. but this video makes me write comments. I know how fucking hard this job, I’m korean then I as well tiler. this work looks very good.
Make a channel
U are well understood
So you guys specifically float floors for say tile and wood floor guys and that’s it, you don’t do the finish surface or is this a finished floor?
Been there done that,tuff work,you gotta be strong,nice job young man!
56 now- and got to do a floor screed like this, not looking forward to it lol
dread. 65 now missed the retirement have to work another year to receive pension .Have to do a floor screed tomorrow 😭😭😫
Within a few years of doing this job your back is f****d up.
나무 막대가 참 길군요. 정말 시원시원하게 일 잘 하십니다.
O trabalho deles são bem mais melhores do q aq no Brasil parabéns ótimo trabalho Deus abençoe 👍👏👏🤜🤛
Seu sabor
Someone needs to give credit to the fellow who mixed it for him. It's very important to have a consistently mixed dry-pack.
Makes it look easy! How is the level kept?
When that ray stood still on the floor that means it's perfect level brother
Great video...but for what it teaches, it could've been 30 seconds long...no info on how to maintain levels, what ratio to mix screed.... safety..ie corrosivness of cement and potential for chemical burns ect...
Can you do a video of the dried screed and put the straight edge on at different angles , so we can see if there is and humps please.
Even watching that my back hurt... You are one tough worker....
No gym required that's one hell of a full body workout but kills the back a bit.
Strong as a bear ! Great work and making it look easy , and if your in the know it ain’t !
Très belle technique de travail ....je le fais de la même façon.... depuis des années.
Maşallah, usta diye buna derim, helal olsun sana arkadaş.
Hello. Which aggregate is used here? Aggregate particle size please. Thank you
The finish looks so smooth
Would guess a 3:1 sharp sand mixed just wet enough to clump.
Sharp washed sand 0-4mm grade- 70% grit/ 30% fine.
Show de trabalho. Parabens. Gostei muito. Like👍
Americano gosta de inventar, por que o cara nao fez por partes no fibal do dia deve ta todo quebrado
May I have a question? How many inches thick to make a good sub-concrete floor? Thank you very much.
What is the mix ? I’m sick of uneven floors at work and trying to get over with deep base self levels
He just filling in the middle see the two row of dry set on the two side that is level already so he do not have to check the middle link Bahamas
Proper job from a pro.You get what you pay for.
I am going to do that in my grandparent's house tomorrow. I never did it before lol. But fuck it, if I mess it up, i have huge hammer
Nice job!! Mate!!
It's an art that many can't do ,
En qué momento le pone agua para que endurezca el concreto
good job. how many square meters can you do per day?
Never seen anyone on their knees screeding .ruff job if you ask me
How else is he going to do it ffs, float on a magic carpet . Thats the way its done . No more about a soup sandwich
Why not use self levelling compound? Cost maybe?
4” of that is ridiculous and this is a flatter floor.
Is this a good trade to earn money?
Can u paint it when finished .or does it get pepple dashed
Gets tile pussy
it looks very easy to me,bcoz I'm a hard worker and I know best easy and fastest tricks
Skills pays the bill!🇺🇸🤓😉🤔
Deze vloer kan niet veel hebben, word alleen glad gestreken niet aangestampt.
optisch mooi eindresultaat maar heel zwak
Amazing exercise 😁
NO BRASIL BAO MESMO É O DETRAN. IPVA. É O MAIS CARO DO MUNDO. PARABENS DETRAN
I want to know which knee pads he's using because I need a pair.
DodgeCity111 get proknees
Basically his knees are in soft sand....he doesnt even need them
Look in your wife's closet
really master of his trade
What is the ratio of dry pack
Sir suppose Miti ki jameen sae laker tile tak final el video plz
Screed is very dry although he is doing s great job it would be hard to keep that level of labour up week in week out
Very good
My job too but very tiring
very nice 👌👌 job Witch material i need for this??
Cement to sharp sand 1:4 ratio and some polypropylene fiber if needed to reinforce the floor. Keep adding water until mix is held in the ball shape when squeezed by hand.
I want a job like this experience for 6 years
Cata apa trebuie sa pui in compozitie
일하는 모습이 진지해서 참보기줗네요
thought the kettle was boiling for a minute there..
Parabéns pelo ótimo trabalho 👏👏👏👏
Hard work
you are number one 👍💪
En my pais se le yama toping es el mismo proceseso aca en panama💯
Saludos exelente trvajo
Im sure you dont have any certifikate for this material..
Fuck certificate
marasz165 yeah right build houses without quality control so better live on the street... what bull shit ... commmon ,,,!!!
감사합니다 ~♡
No Brasil e difícil achar uma régua boa assim.....
E um q faça desse tipo.
Good job.
Is this going over under floor heating
What do u think fool
great job
Fair play mate great job 💪
VERY GOOOOOOOOD
please answer! where can i get those knee pads ??
Of the shelf.
Your wife got 2 pair 🤣🤣
Great work. Kudos.
Great work fella!
Soy albañil y no entiendo cómo polvo de cemento se puede secar despues
Hypnotic
Nice job
bravo! I ll do that in the garden
I enjoy that work!
The guy who mixed up was in the pub
Goed job respect from morocco
C est super propre
Sing ohh ahhh sadi ay ooh ahh sayddi ay
Nice Job, congratulation
Good job
Good work , sir
Level?
Ah ye al rite ! Yee be fine.
Ótimo trabalho
How does he know if the floor is level?
there are two ways to do it either with scaff tubes(timber etc) or make a bridge with screed side to side,,in this video he has made two beds of screed side to side(which are levelled) and his straight edge is sliding back n forth on it..then you just fill in the middle bit.
did he allow the side bridge to dry first before filling the middle?
Hard worker....weldone
Why so dry? If it was that bit wetter there'd be no need for all that floating either
Because it would start separating and to be honest he ain't even compacting it first
Damn that looks physically hard.
Donald Thompson ,yes Sir after 30 yrs of doing this as a master tile setter I can honestly say my body is a train wreck (-:
Great Job Bro
Misteic very big misteic. Nu apasa mijlocul dreptarului . !!!!!!!!!
I know this tricks from past 12 years
Thank fuck im retired but i was a beast some views them wes 😅
Hard Yakka mate. I'd be there all day.
Your half way there if you’ve got readymix screed ,,it’s a bit different when it’s drum mixed and every mix is different,,I know,,I did the job,,56 years ago,,,! Lol,👍
If you gauge your materials into a mixer,you should be able to get a constant uniform mix.
what are the ratio of mix?
Hard worker.