Thank you! I have a leaky valve and I didn’t know they had to be open to replace it. Makes 100% sense. Very thorough video👍🏼. I was instructed when putting the escutcheons on to put a small bead of caulk on the escutcheon and let it sit for a minute or two and then slide it on. Any excess should be wiped off but I can see how over time the putty might be better and easier to work with
This tub is absolutely ua-cam.com/users/postUgkxVoi3B4CB6Oygq1-vo4OTL1M_M5JkrXif . Great quality too. The perfect size for the space in our master bath!
Thank you for making this helpful video. Especially the tools, although I still don’t know its name, but I have screenshots. This gonna save me 500 bucks 👍👍👍👍👍👍👍👍👍👍👍
I replaced the cold water stem in my shower. But the problem im having now is when you shut the water off, the handle won’t stop spinning. And if you keep spinning it, the entire handle + stem will pull out of the wall. Is this just because I wasn’t using the socket wrenches and was simply using a wrench to tighten it?
Thanks for watching & welcome to the DIY Raptor Club. Any update? By chance did you apply Teflon tape to the thread of the stem? Teflon tape will not only create a water-tight seal, it will assist in firmly securing the stem into the threaded housing of the valve... ultimately not allowing it to spin or loosen in any way over the months and years of using your handles. Also, have you ensured that you purchased the exact replacement size part? A stem with an ever-so-slightly smaller thread diameter will cause this exact issue.
@@DIYwithMichaelBorders he’s not saying the body is spinning, rather the handle is. This occurs when the barrel doesn’t seat fully and you can’t shut the water off.
Rogerio Rodriguez Thanks for watching. We absolutely love reading comments like yours. Kinda sounds like you’re officially a “DIY’er”...🤔 Welcome to the club. Us DIY’ers need to stick together. Many more helpful videos to come. 😀 Let us know if you have any questions. Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Thanks for watching & sharing this, we appreciate it. You are very welcome Mary. Us fellow DIY’ers need to stick together! Hopefully many stress free days ahead for you. Enjoy your night. 😎👍🔧🔩
Good morning ☕️ any update? You may need to add a little bit of heat…however doing your absolute best not to allow the heat to damage any of the surrounding parts and tile.
Thanks for your video. My bathtub faucet has three handles and was made by Eljer. Several years ago I had to have a plumber come out in the past due to the handle on the hot water side not cutting the water off. I watched the plumber take it apart and replace the seat washer on the end of the stem and it fixed the leak. Everything was good until this past weekend when turning the hot water off the handle suddenly turned the water back on after almost having it off. I decided to try my hand at it this time and got the necessary supplies and replaced the washer myself. When turning the handle the water does cut off, but the handle still comes loose again and water flows and a little more twisting I was able to get the water back off. Is this a sign that the stem has gone bad as well?
Thank you for a very helpful video! One question - do you need to seal the inner part of the plate, where the plate’s donut hole and the stem meet? Seems like water could get in that way?
Great video, thank you. Please allow me one question. I have a 3 handle very old (1973) tub faucet. It seems it's made by Jameco. I want to replace/upgrade the three stems, especially the diverter which no longer works. So in your opinion which plumbing fixtures company stems i should use for this replacement. Or, would the internal old valve accept any upgrade kit. Thank you a lot for your time. Sam
Sam Rafeedie You are very welcome Sam. Glad it helped. Great question & we are glad you asked. A valve system that old will require a little bit of searching...which is normal & doable. Lowes or Home Depot will most likely not have the Stems in store however if you are able to remove a stem, you can take it to your local Lowes or Home Depot and they have a huge catalog in the plumbing department to allow you to match your part. The problem with that is... if they have to order it, it may be a few days until you get it... which will force you to reinstall old diverter stem until the new one comes which shouldn’t be a big issue. If Lowes or Home Depot do not have access to the new Stems, The next best thing to do is search local plumbing dealers such as Kohler dealers, Moen dealers, & Jameco dealers. They are a much better option when trying to find parts that old. You mentioned that your 3 handle system is from 1973. You won’t believe us when we say this however the valve system we worked on in this video is literally from 1973... that’s when the place was built and it is the original plumbing. 😀 We were able to get our parts from a local Kohler dealer. We recommend contacting all local plumbing companies that perform all sorts of plumbing installations. Let’s start there, keep us posted Sam! Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Next time if it's just HOT water, just go to the Hot Water heater and turn off the outbound HOT water line. Might be faster but a few seconds. But great video.
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. We appreciate you sharing your thoughts. 👍 Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem. toolboxtoken.com Reach out to us any time! 🧰
This is the one i need to change out , mine is hard to turn all of a sudden ... i have to find what size it is nothing is leaking just getting harder to turn lately .. i changed it when i moved in here 10 years ago there was no hot water since the house was empty for a while when it was for sale . Thanks for sharing ~
Awesome, definitely reach out to us if you have any questions. Even if you don’t have any questions, we’d love to hear back from you on how the project went. 👍
I learned stuff from you, thank you so much!! Before I watched this video I had created a hole where the middle knob was bc I stripped the copper pipe there and now I can’t put a new knob on it :(. The plumber said I have to replace the whole copper piping to get it replaced and that it’d cost $2700 😯. I don’t have that much money right now :/ is there something I can use to temporarily plug that hole so I can start taking showers here vs at my friends house 😬 😂 I wish I watched your videos BEFORE I did that!
I know I just when way over my plumbing skill set (which is none 😂), but all I was trying to do was to replace the shower knobs (that have probably been there since 1949 when the house was built lol). But I realize now, I shouldn’t have messed with it and just had a plumber do it..I just didn’t foresee it messing with the internal copper piping like it did 😢 So I just want a temporary solution to be able to shower without water going into that hole in the wall…while I wait patiently for my soon to come piping replacement. Ugh! I wish you were here 😂
Thanks for watching, you can apply painters tape to cover hole. We agree, it’s a great idea to alleviate any & all water/moisture from getting into hole & sneaking behind wall. Keep us posted as the plumber comes & goes. 😎👍🔧🔩
Outside, there are 3 handles in the box. They won't turn easily at all. 40+ year old home. So I just take the t-bar to the city main and turn the water off there. Quick and easy.
Hard Rock Master Thanks for watching & we hope the video helped. Let us know if you have any questions. We really enjoy making these helpful videos for our fellow DIY’ers. 😀 Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Brian Sanders Thanks for watching Brian. You can purchase compatible stems. That may be a good route to take. You may need to purchase a few & carefully insert one at a time into the thread until you find the perfect match. Again be careful as you do not want to damage internal thread. 😎👍🔧🔩
Thanks for the video. Mine is a 3 ways shower valve. The brand is,”standard”. The only time I see the water leaks through the valve stem is when I turn on the water. Do you think I just need to replace the seal or also the seat ? Or the whole valve stem ? And is it the same design like any other brand or different ? Thanks
Thanks for watching, any update? We would recommend replacing the stem and o-ring seal first. If that doesn’t fix leak, replacing seat would be next likely cause.
Great video! I am trying to understand if this would help with low pressure it’s only for the hot side but the pressure works fine everywhere else in the house?
I have a very old 2 knob handle system with the diverter in the tub faucet. House was built in 1940. I traced my leaky faucet back to the hot water cartridge, but I can't figure out what brand it is. Any way to put a completely new type of valve and stem in there? At this point I'm thinking it's a better option to swap it all out for something modern than to keep trying to find old stuff and adapters for it. Thanks in advance!
Thanks for watching & it’s definitely an option. If you are looking to install a brand new valve system such as a single shower head installment or something more modern, you may need to consult with a licensed plumber as they may need to remove drywall/tile to gain access to valve & ensure it is replaced in a manner that meets proper code. However if you are more interested in replacing the current stems with replacement stems as opposed to installing a brand new system, it can go fairly quickly and be very friendly price wise. Please keep us posted on your project. Looking forward to hearing back from you.
I'd like to replace all the valves on my shower, but it's old, I didn't have it installed, and don't know the manufacturer of this faucet. Do you have any advice?
jmad627 Thanks for watching & we hope the video helped. Absolutely we can help. After removing a single Stem, you can take that Stem to your local Lowes or Home Depot and they have a large parts magazine in the plumbing section. You can match your exact Stem to the Stem inside the magazine and you will be able to pinpoint what manufacturer or brand your Valve and all parts are. Keep us posted! We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come. 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
DIY With Michael Borders does, or do these valve cartridges have to be the same manufacturer as the valve body? Are the interchangeable? At the moment the diverter valve is the most pressing issue. But I'd like to replace all of them with matching trim and handles and all. Is this possible without changing the valve body? Oh...and thank you for replying.
jmad627 Thanks for the question. Home Depot, Lowes, or ACE hardware can match your original parts with new aftermarket parts...definitely possible. Hope this helps. 😎👍🔧🔩
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. Thank YOU! We appreciate you taking the time to share this on your Thursday morning. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
If I change out the seat in the pipe would that allow me to install a different stem from what I currently have or would I have to completely change out the entre valve for the tub/shower?
duke0482 Thanks for watching & we hope the video helped. Great question & you can definitely install new stems as long as the thread diameter & measurements are the same. LOWES & Home Depot have a huge pictoral image catalog in their plumbing section inside their stores. You can take your old stem and have one of their plumbing specialist show you the options you can choose from. 😀 We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come. 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
When I turn the shower divert valve water flows great out of the shower but when it’s in the opposite position water barely flows out of the hot or cold lines to the faucet. How could the shower diverter valve cut the flow of water to a trickle to the faucet? None of the valves leak.
Thanks for watching. You raise a great question...& as you hinted toward in your comment...this is not normal. As you pull diverter out to allow water to flow to upper head, something inside may be clogging it. The inner rubber seal may be warped & falling off leading to blockage. How old is diverter? Replacing diverter may help solve issue. Has this been happening for awhile or just recently? Keep us posted. Us fellow DIY’ers need to stick together! 😎👍🔧🔩
Hi Michael, I really appreciate your response! I’ve searched all over the net but couldn’t find anything related to my problem. The water flows perfectly to the shower but when I use either the cold or hot water there’s just a trickle of water flowing to the spout. It’s been this way for several years. We’ve been filling the tub with water from the shower because the pressure is so good. But if we turn the shower valve to the faucet it would take 15 minutes to fill. All the valves are 15-20 years old. I guess the next step is to just replace the shower valve since it’s the only common link. Thanks again for your quick response!!!
@@MovieMakingMan We appreciate your reply. Something is interfering the flow of water. You may need to install a new tub faucet. This is a very friendly DIY project...it may be incredibly calcified inside. Below is a link to a video that shows us removing faucet & cleaning it...however if your water flow is that low, we recommend a new faucet. ua-cam.com/video/QQoYt8C3Btc/v-deo.html Keep us posted. 😎👍🔧🔩
Thanks for watching & it’s usually easier to remove part & visit your local hardware store to match it up with the exact replacement part. Keep us posted. 😎👍🔧🔩
Michael question for you. How satisfied are you with the handles that came with this kit? I was able to get one seat/valve stem replaced today after hours of nothing but difficulty and once I got it together the knob on it feels like it’s a bit loose when you turn the water on like it wiggles a little bit and doesn’t seem stable like the old handles like you had and I had before the repair. It seems fine when the water is off. Have you noticed that or are your handles movement free? Thanks!
Thanks for watching & that’s an option as well...as long as you have actual shutoff valve’s designated specifically for your hot/hot lines to tub/shower. We hope the video helped. Enjoy your day. 😎👍🔧🔩
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community. Thank YOU for watching and sharing this on your Thursday night. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
Thanks for watching & welcome to the DIY Raptor Club. This is a Koehler. Below is a link to our video showing more details. ua-cam.com/video/sSeLbJxw-Ao/v-deo.html 😎👍
I was watching this because I have twins.. son and a daughter. Son is experiencing agro testosterone overload and doesn’t know his own strength. Daughter is experiencing her pre wife sensibilities by having me repair broken shower handles... while remodeling a shower/bath. FML.
Thank you! I have a leaky valve and I didn’t know they had to be open to replace it. Makes 100% sense. Very thorough video👍🏼. I was instructed when putting the escutcheons on to put a small bead of caulk on the escutcheon and let it sit for a minute or two and then slide it on. Any excess should be wiped off but I can see how over time the putty might be better and easier to work with
Thanks for watching & welcome to the DIY Raptor Club. Sounds like you’ve got a good handle on your project. Please keep us posted matthew.
😎👍🔧🔩
Incredibly helpful, from start to finish. Thank you!
Thanks for sharing this, happy to here. Enjoy your weekend. 👍
This tub is absolutely ua-cam.com/users/postUgkxVoi3B4CB6Oygq1-vo4OTL1M_M5JkrXif . Great quality too. The perfect size for the space in our master bath!
Thank you for making this helpful video. Especially the tools, although I still don’t know its name, but I have screenshots. This gonna save me 500 bucks 👍👍👍👍👍👍👍👍👍👍👍
Good morning ☕️
We are honored to hear our video was helpful, and saving $500.00 is amazing!
Looking forward to hearing back from you. 👍🧰
I replaced the cold water stem in my shower. But the problem im having now is when you shut the water off, the handle won’t stop spinning. And if you keep spinning it, the entire handle + stem will pull out of the wall. Is this just because I wasn’t using the socket wrenches and was simply using a wrench to tighten it?
Thanks for watching & welcome to the DIY Raptor Club. Any update? By chance did you apply Teflon tape to the thread of the stem?
Teflon tape will not only create a water-tight seal, it will assist in firmly securing the stem into the threaded housing of the valve... ultimately not allowing it to spin or loosen in any way over the months and years of using your handles.
Also, have you ensured that you purchased the exact replacement size part? A stem with an ever-so-slightly smaller thread diameter will cause this exact issue.
@@DIYwithMichaelBorders You don't need teflon tape for this job.
@@gary7vn
Thanks for sharing your thoughts.
@@DIYwithMichaelBorders he’s not saying the body is spinning, rather the handle is. This occurs when the barrel doesn’t seat fully and you can’t shut the water off.
@@Mike-gz4xn
Very kind of you to share, we really appreciate this Mike! 👍
Thank you for making this video very helpful I needed to know how to remove the shower valve stem to fix something at my house 👍
Rogerio Rodriguez
Thanks for watching. We absolutely love reading comments like yours. Kinda sounds like you’re officially a “DIY’er”...🤔
Welcome to the club. Us DIY’ers need to stick together. Many more helpful videos to come. 😀
Let us know if you have any questions. Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Thanks for making DIY videos. It's so amazingly helpful. 🙏🏾🙏🏾🙏🏾
Thanks for watching & sharing this, we appreciate it. You are very welcome Mary. Us fellow DIY’ers need to stick together! Hopefully many stress free days ahead for you.
Enjoy your night. 😎👍🔧🔩
@Ramon Will
Very cool & that’s great to hear. We appreciate you sharing this. Hopefully many stress free days ahead for you.
😎👍🔧🔩
The plate does have a screw & I can’t remove it any suggestions?
Good morning ☕️ any update? You may need to add a little bit of heat…however doing your absolute best not to allow the heat to damage any of the surrounding parts and tile.
Thanks for your video. My bathtub faucet has three handles and was made by Eljer. Several years ago I had to have a plumber come out in the past due to the handle on the hot water side not cutting the water off. I watched the plumber take it apart and replace the seat washer on the end of the stem and it fixed the leak. Everything was good until this past weekend when turning the hot water off the handle suddenly turned the water back on after almost having it off. I decided to try my hand at it this time and got the necessary supplies and replaced the washer myself. When turning the handle the water does cut off, but the handle still comes loose again and water flows and a little more twisting I was able to get the water back off. Is this a sign that the stem has gone bad as well?
Thank you for a very helpful video! One question - do you need to seal the inner part of the plate, where the plate’s donut hole and the stem meet? Seems like water could get in that way?
Thank you kindly, that’s a great question. You can definitely apply plumbers putty to seal that portion.
😎👍
Great video, thank you. Please allow me one question. I have a 3 handle very old (1973) tub faucet. It seems it's made by Jameco. I want to replace/upgrade the three stems, especially the diverter which no longer works. So in your opinion which plumbing fixtures company stems i should use for this replacement. Or, would the internal old valve accept any upgrade kit. Thank you a lot for your time.
Sam
Sam Rafeedie
You are very welcome Sam. Glad it helped. Great question & we are glad you asked.
A valve system that old will require a little bit of searching...which is normal & doable. Lowes or Home Depot will most likely not have the Stems in store however if you are able to remove a stem, you can take it to your local Lowes or Home Depot and they have a huge catalog in the plumbing department to allow you to match your part.
The problem with that is... if they have to order it, it may be a few days until you get it... which will force you to reinstall old diverter stem until the new one comes which shouldn’t be a big issue.
If Lowes or Home Depot do not have access to the new Stems, The next best thing to do is search local plumbing dealers such as Kohler dealers, Moen dealers, & Jameco dealers. They are a much better option when trying to find parts that old.
You mentioned that your 3 handle system is from 1973. You won’t believe us when we say this however the valve system we worked on in this video is literally from 1973... that’s when the place was built and it is the original plumbing. 😀
We were able to get our parts from a local Kohler dealer. We recommend contacting all local plumbing companies that perform all sorts of plumbing installations.
Let’s start there, keep us posted Sam!
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Next time if it's just HOT water, just go to the Hot Water heater and turn off the outbound HOT water line. Might be faster but a few seconds. But great video.
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
We appreciate you sharing your thoughts. 👍
Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem.
toolboxtoken.com
Reach out to us any time! 🧰
This is the one i need to change out , mine is hard to turn all of a sudden ... i have to find what size it is nothing is leaking just getting harder to turn lately .. i changed it when i moved in here 10 years ago there was no hot water since the house was empty for a while when it was for sale . Thanks for sharing ~
Awesome, definitely reach out to us if you have any questions. Even if you don’t have any questions, we’d love to hear back from you on how the project went.
👍
@@DIYwithMichaelBorders Yes for sure . Thanks ~
@@joedevitto6113
😎👍
I got two plastic pieces broken when I take out the brass valve. Do I got to replace any piping?
Thanks for watching, are the plastic parts broken off of the old stem/cartridge?
I was told they were broken, but the guy who was telling me isn't a plumber lol. If I had a way of sending you a picture or video you could tell me.
@@daviddart400
Thanks for the follow up. In that case, it’s a good idea you’re replacing them with new. 👍
I learned stuff from you, thank you so much!! Before I watched this video I had created a hole where the middle knob was bc I stripped the copper pipe there and now I can’t put a new knob on it :(. The plumber said I have to replace the whole copper piping to get it replaced and that it’d cost $2700 😯. I don’t have that much money right now :/ is there something I can use to temporarily plug that hole so I can start taking showers here vs at my friends house 😬 😂
I wish I watched your videos BEFORE I did that!
I know I just when way over my plumbing skill set (which is none 😂), but all I was trying to do was to replace the shower knobs (that have probably been there since 1949 when the house was built lol). But I realize now, I shouldn’t have messed with it and just had a plumber do it..I just didn’t foresee it messing with the internal copper piping like it did 😢
So I just want a temporary solution to be able to shower without water going into that hole in the wall…while I wait patiently for my soon to come piping replacement. Ugh! I wish you were here 😂
Thanks for watching, you can apply painters tape to cover hole. We agree, it’s a great idea to alleviate any & all water/moisture from getting into hole & sneaking behind wall.
Keep us posted as the plumber comes & goes. 😎👍🔧🔩
Outside, there are 3 handles in the box. They won't turn easily at all. 40+ year old home. So I just take the t-bar to the city main and turn the water off there. Quick and easy.
Hard Rock Master
Thanks for watching & we hope the video helped. Let us know if you have any questions.
We really enjoy making these helpful videos for our fellow DIY’ers. 😀
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
What do you do if you accidentally threw out the old diverter and stems, and don't know who made them? How do you find out which ones to buy?
Brian Sanders
Thanks for watching Brian. You can purchase compatible stems. That may be a good route to take. You may need to purchase a few & carefully insert one at a time into the thread until you find the perfect match. Again be careful as you do not want to damage internal thread.
😎👍🔧🔩
Thanks for the video. Mine is a 3 ways shower valve. The brand is,”standard”. The only time I see the water leaks through the valve stem is when I turn on the water. Do you think I just need to replace the seal or also the seat ? Or the whole valve stem ? And is it the same design like any other brand or different ? Thanks
Thanks for watching, any update? We would recommend replacing the stem and o-ring seal first.
If that doesn’t fix leak, replacing seat would be next likely cause.
Great video! I am trying to understand if this would help with low pressure it’s only for the hot side but the pressure works fine everywhere else in the house?
Thanks for watching and your stem may be clogged. Replacing it will be a good idea. 😎👍
I have a very old 2 knob handle system with the diverter in the tub faucet. House was built in 1940. I traced my leaky faucet back to the hot water cartridge, but I can't figure out what brand it is. Any way to put a completely new type of valve and stem in there? At this point I'm thinking it's a better option to swap it all out for something modern than to keep trying to find old stuff and adapters for it. Thanks in advance!
Thanks for watching & it’s definitely an option. If you are looking to install a brand new valve system such as a single shower head installment or something more modern, you may need to consult with a licensed plumber as they may need to remove drywall/tile to gain access to valve & ensure it is replaced in a manner that meets proper code.
However if you are more interested in replacing the current stems with replacement stems as opposed to installing a brand new system, it can go fairly quickly and be very friendly price wise.
Please keep us posted on your project. Looking forward to hearing back from you.
I'd like to replace all the valves on my shower, but it's old, I didn't have it installed, and don't know the manufacturer of this faucet.
Do you have any advice?
jmad627
Thanks for watching & we hope the video helped. Absolutely we can help. After removing a single Stem, you can take that Stem to your local Lowes or Home Depot and they have a large parts magazine in the plumbing section. You can match your exact Stem to the Stem inside the magazine and you will be able to pinpoint what manufacturer or brand your Valve and all parts are. Keep us posted!
We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come. 😀
Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
DIY With Michael Borders does, or do these valve cartridges have to be the same manufacturer as the valve body?
Are the interchangeable?
At the moment the diverter valve is the most pressing issue.
But I'd like to replace all of them with matching trim and handles and all.
Is this possible without changing the valve body?
Oh...and thank you for replying.
jmad627
Thanks for the question. Home Depot, Lowes, or ACE hardware can match your original parts with new aftermarket parts...definitely possible.
Hope this helps. 😎👍🔧🔩
DIY With Michael Borders it does, thank you.
jmad627
😎👍🔧🔩
Thank you!
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
Thank YOU! We appreciate you taking the time to share this on your Thursday morning. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
If I change out the seat in the pipe would that allow me to install a different stem from what I currently have or would I have to completely change out the entre valve for the tub/shower?
duke0482
Thanks for watching & we hope the video helped. Great question & you can definitely install new stems as long as the thread diameter & measurements are the same. LOWES & Home Depot have a huge pictoral image catalog in their plumbing section inside their stores. You can take your old stem and have one of their plumbing specialist show you the options you can choose from. 😀
We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come. 😀
Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
When I turn the shower divert valve water flows great out of the shower but when it’s in the opposite position water barely flows out of the hot or cold lines to the faucet. How could the shower diverter valve cut the flow of water to a trickle to the faucet? None of the valves leak.
Thanks for watching. You raise a great question...& as you hinted toward in your comment...this is not normal.
As you pull diverter out to allow water to flow to upper head, something inside may be clogging it. The inner rubber seal may be warped & falling off leading to blockage.
How old is diverter? Replacing diverter may help solve issue. Has this been happening for awhile or just recently? Keep us posted. Us fellow DIY’ers need to stick together!
😎👍🔧🔩
Hi Michael, I really appreciate your response! I’ve searched all over the net but couldn’t find anything related to my problem. The water flows perfectly to the shower but when I use either the cold or hot water there’s just a trickle of water flowing to the spout. It’s been this way for several years. We’ve been filling the tub with water from the shower because the pressure is so good. But if we turn the shower valve to the faucet it would take 15 minutes to fill. All the valves are 15-20 years old. I guess the next step is to just replace the shower valve since it’s the only common link. Thanks again for your quick response!!!
@@MovieMakingMan
We appreciate your reply. Something is interfering the flow of water. You may need to install a new tub faucet. This is a very friendly DIY project...it may be incredibly calcified inside. Below is a link to a video that shows us removing faucet & cleaning it...however if your water flow is that low, we recommend a new faucet.
ua-cam.com/video/QQoYt8C3Btc/v-deo.html
Keep us posted. 😎👍🔧🔩
always turn on water and test new stems for leaks before closing things up.
Thanks for watching & sharing your thoughts. Any & all helpful info is greatly appreciated.
😎👍🔧🔩
How do you know what kind of stem to get? So many shower valves aren't marked for manufacturer, much less model.
Thanks for watching & it’s usually easier to remove part & visit your local hardware store to match it up with the exact replacement part. Keep us posted.
😎👍🔧🔩
Michael question for you. How satisfied are you with the handles that came with this kit? I was able to get one seat/valve stem replaced today after hours of nothing but difficulty and once I got it together the knob on it feels like it’s a bit loose when you turn the water on like it wiggles a little bit and doesn’t seem stable like the old handles like you had and I had before the repair. It seems fine when the water is off. Have you noticed that or are your handles movement free? Thanks!
Why is it necessary to turn off all water to house, but not just the valves to the shower?
Thanks for watching & that’s an option as well...as long as you have actual shutoff valve’s designated specifically for your hot/hot lines to tub/shower. We hope the video helped. Enjoy your day.
😎👍🔧🔩
❤thanks
Good morning, just poured a cup of coffee and am sitting down to answer any and all questions for the DIY community.
Thank YOU for watching and sharing this on your Thursday night. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
can i ask what stem that its exactly like mine icannotfind
Thanks for watching & welcome to the DIY Raptor Club. This is a Koehler.
Below is a link to our video showing more details.
ua-cam.com/video/sSeLbJxw-Ao/v-deo.html
😎👍
@@DIYwithMichaelBorders so would you call this 1/2 or 3/4..wish i could show you pic of my stem its very old..seems cant post puc here..
@@geowilson1587
Don’t recall the exact size.
Did I miss something..you turn off the valve but the valve was all ready closed when you installed it...
Thanks for watching & welcome to the DIY Raptor Club. The water was turned off at the exterior valve to ensure no water flow during project.
😎👍
Is it me or is it spinning the wrong way
Thanks for watching Bob. Projects never end. Hope all is well.
😎👍🔧🔩
Thanks liked the video
@@7243598830
We appreciate that Bob. Us fellow DIY’ers need to stick together!
😎👍🔧🔩
Lmao this guy with the vice grips backwards and turning the house water off for no reason
Thanks for watching & sharing your thoughts, let us know if you have any questions. Hope all is well with you and your family.
😎👍
I was watching this because I have twins.. son and a daughter. Son is experiencing agro testosterone overload and doesn’t know his own strength. Daughter is experiencing her pre wife sensibilities by having me repair broken shower handles... while remodeling a shower/bath. FML.