Hey Captain Xavier, you know what you should do? intergrate the hammer action of a hammershot into a either a maverick or a strong arm, preferably a strong arm. that way you could have a hammer action revolver where the cylinder pops out to the side like most modern revolvers. or you could try and intergrate the strongarm or maverick swing arm cylinders into a hammershot. either way I'm pretty sure it'll look cool
Was actually awake for a upload didn’t finish yet but these videos are always awesome! It’s a collaboration to! After finishing I can say you are the first nerfer that I watch that gets a 69 and doesn’t say giggity.
Yesterday i went to my local goodwill and found a hammershot, demolisher 2 in the, and an Apollo all of them for 20 bucks Did captain Xavier really liked my comment
Next time you open up the Hades, could you make some photos of how the separated parts of the shell look and how the trigger and switches go in? reason: i think it would be more stable to replace the complete black part of the shell if you want a longer stock
Captain! Hows the hop up on your hades? I know this is a common problem with rival but when i k26ed mine a few weeks back after about 20 feet its not accurate at all. The balls shot strait into the air. Did you have that problem? Would putting more k26 into mine fix that? I think i only used about 12 coils, pretty much the minimum amount I could. My kronos doesnt have a pop up problem and that hits way harder.
To do that you would have to completely replace the internals. It does not have a bolt so making it mag few would require complete internal transplant. Not worth the effort in my opinion. I just plan to print a few clips and see if it is useful. :)
@@CaptainXavier unless you did the breach in a similar way as you did your sealed brass breach deploy attachment for Ire but instead of ataching it to the mount for Ire you attached it directly to the plunger head and instead of the bolt handle to open the breach it would open with the pump. Maybe not practicle but a cool idea.
I can't wait to see how well the moded Thunderhawk does. :) The thingiverse files have an enlarged muzzle piece. You should try half darts in the shotgun harmonica bar magazine to double darts per blast. Will you be trying the Rival harmonica bar?
Hey cap! do you think the thunderhawk's clip could be holding back its performance like an AR? Also an elite singled one(maybe upgraded spring) would be cool! I might do that.
Captain Xavier Could the Thunderhawk clip simply be packed with two or three Rival rounds per chamber to achieve a shotgun effect? I don't have anything in my arsenal right now chambered for Mega except a pair of Magnus (Magnuses? Magnii? Magnese? Whatever...) so I don't have anything that will let me check the fit.
@@CaptainXavier i am new to this springs type but what can i do to my lefted prime spring on my thunderhawk, should i just replace the spring with k26? The fire power and its performance decreased 😕
Well, unfortunately, as I said, I wasn't even aware of the existence of k27 until today, so I can hardly give any meaningful advise as to its use. I am, however, very familiar with k26 and find it works very well in Rival and Mega blasters. Take from that what you will. :)
I need help. I did this upgrade, It worked fine but, the when I tested the de-prime it locked up. I took it apart again. I tried a longer K26, 14 coils is too much. It won't catch. I went back to the 12 coil K26. Put it back together but, now the balls basically travel about 10 ft. I have no idea what the problem is? Please, do you have any ideas?
I just finished putting it back together. That's what it felt like, that it wasn't sealed somewhere. I re-lubed it and it's working fine now.It's a nice upgrade since my Hades was already primed from the factory. Thanks for the advice! I'll have to talk to you this weekend about how you got 15 coils in there. See ya then!
I am so disappointed with the grey trigger thunderhawk. It fires maybe 8-10 meters flat, while shouldered, which means it is ludicrously gimped. Sad to see that even k26'd its terrible. Pastebin is updated, thank you for the great vid as usual.
Would you kindly do a mini-episode when you find a fix to the Hades stock? That is the only reason I don't like mine. Also do you have thoughts on Truck-bed liner for rubberizing something like the butt of a stock?
@@CaptainXavier plunger rod snapped in half on the second shot- and yes I remembered the little screw. Can't seem to find a replacement either. (sniff)
Captain Xavier I did read that I was just giving a fun fact also I think you can get it from McMaster and if you do get some try it with reverse plunger blasters I actually might fit around some of them
Ya know what i get sick and tired of upgrades breaking the plastic gears and parts so i wanna see a video were we replace the plastic gears and parts with strong steel machined parts. Call it "Beef up"
How would I inject the name of my God? Like...write it on a piece of paper, burn it, powder the ashes, dissolve them in a saline solution, and shoot up?
@@CaptainXavier I am simply quoting the Holy Scripture and what they have said. More accurately "THE 10 COMMANDMENTS" I was just tryna be humorous obviously i failed
Seems like the “first” mega of either series is fucking horrible...only words I can use, BUT WE HAVE HOPE, IF THE PROPHECY IS TRUE THE SECOND BLASTER SHALL BE AMAZING
Well, my good Sir. I'm reasonably certain I have a Modified Megalodon that could easily tag you at 60' with it's Ammo (1/2dart-Mega-Slugs). You're welcome to check out my Instagram page for a picture if you wish. After all, if it weren't for Yourself, Walcom S7 and his dirty-shot-gun-obsessions, and DrFlux. The Lever-Action-Prime (EVISCERATOR MK5) might not exist. MrScott54, BionicBlasters.😉😃😁😇🤓😎🤠
![[REVIEW] Nerf Rival Hades XVIII-6000 | 60 Round Capacity!](/img/n.gif)
Hey Captain Xavier, you know what you should do? intergrate the hammer action of a hammershot into a either a maverick or a strong arm, preferably a strong arm. that way you could have a hammer action revolver where the cylinder pops out to the side like most modern revolvers. or you could try and intergrate the strongarm or maverick swing arm cylinders into a hammershot. either way I'm pretty sure it'll look cool
Imagine it in a rough cut or barrel brake. Two hammers obviously. Not practical at all though.
There's a break action hammershot by MrHeathpants, google it, it's awesome!
@@zeroblade6599 Ah seen that. It's great.
Yass! Finally someone other than me wants this to happen
@@zeroblade6599 I've seen that, but what I suggested is one that has a more modern revolver feel to it
Was actually awake for a upload didn’t finish yet but these videos are always awesome! It’s a collaboration to! After finishing I can say you are the first nerfer that I watch that gets a 69 and doesn’t say giggity.
Nice
LMAO 69 but not epic enough he should get 420 distance
CHECKMATE!!
*Use Davie504 voice for good*
Just looking inside the Thunderhawk triggers PTSD memories of the Centurion... XD
Please tell me Out of Darts just sent you a ridiculously long video of him saying random words for the "a word from our sponsor" parts.
Lots of short ones.
Wait for it...
@@CaptainXavier it's been a year SCINCE that comment
Nice
@@CaptainXavier still waiting.......
Captain Xavier: master of illusion.....
Hm. Without the gimmick extendo barrel, that blaster actually has some neat body lines. Add a pump grip and its perfect.
It's precisely for times like this that I use screw maps when opening blasters, adding S/M/L for screw length...
Whenever I hear K26 I think of Russian submarines
Probably because of the T32 tank
Yesterday i went to my local goodwill and found a hammershot, demolisher 2 in the, and an Apollo all of them for 20 bucks
Did captain Xavier really liked my comment
He...He stole the music from Hermitcraft Recap! The sly dog!
Jonathan Stowers I know!!!!! Outrageous
From the internals, it’s a re-shelled rotofury minus the rotation mech and drum.
...yup...that is why at 2:05 I literally say that...
😅 Oops. I watch your videos while doing my own modding. Must have stepped out into the shop for a minute and missed that part. 😇
6:19
For all you Coop772 fans,
*giggity.*
Came to comment this, ya beat me to it
"I hope you know where that came from young man" I almost choked on a pretzel when I heard it
That is truly a word, better than I could’ve said myself, thanks to Out of Darts!
The Hades went from about 87 to 125 which is a huge improvement
Next time you open up the Hades, could you make some photos of how the separated parts of the shell look and how the trigger and switches go in?
reason:
i think it would be more stable to replace the complete black part of the shell if you want a longer stock
Project Nerf has an incredible K26 Hades tutorial!!
Best sponsor break ever!
What did that poor rapidsrtrike do
Captain! Hows the hop up on your hades? I know this is a common problem with rival but when i k26ed mine a few weeks back after about 20 feet its not accurate at all. The balls shot strait into the air. Did you have that problem? Would putting more k26 into mine fix that? I think i only used about 12 coils, pretty much the minimum amount I could. My kronos doesnt have a pop up problem and that hits way harder.
I really dig how the Thunderhawk looks without the bipod and the barrel thing
My favorite show on UA-cam!
Reminder: Captain Xavier K26 database at docs.google.com/spreadsheets/d/1FzUR1qSjZ8IfUp38TmOF2Hj4JihE4gICgH5Yj3k_AYw/edit?usp=sharing
Well now I need a Hades and 16 coils of K26!
@@bernie604 Why would you read the comments before watching?
What length did you cut the k26 to
Stock spring in an artemis is 10kg and k26 is 13kg. I'm assuming the hades has the same 10kg spring.
It’s the return of the harmonica guns
How many coils total were in the thunderhawk to improve its performance?
You should take the idea of the pump system further and make a magwell and breach system out of the existing clip port and have it fire elites.
To do that you would have to completely replace the internals. It does not have a bolt so making it mag few would require complete internal transplant. Not worth the effort in my opinion. I just plan to print a few clips and see if it is useful. :)
@@CaptainXavier unless you did the breach in a similar way as you did your sealed brass breach deploy attachment for Ire but instead of ataching it to the mount for Ire you attached it directly to the plunger head and instead of the bolt handle to open the breach it would open with the pump. Maybe not practicle but a cool idea.
That would, indeed, work.
I live for these k26 videos
Fun fact about the hades: you can shoulder it like a rocket launcher
using some sort of wierd gear geometry, how hard would it be to made the thunderhawk crank operated?
Depends entirely on your ability to fabricate gears...
For a second, I thought sirens were coming down my street.
that thing reminds me of the sawtooth from the 90s
I can't wait to see how well the moded Thunderhawk does. :)
The thingiverse files have an enlarged muzzle piece.
You should try half darts in the shotgun harmonica bar magazine to double darts per blast.
Will you be trying the Rival harmonica bar?
its beret, who some times whears a beret
Hey cap! do you think the thunderhawk's clip could be holding back its performance like an AR? Also an elite singled one(maybe upgraded spring) would be cool! I might do that.
OML I just realised... The split strike or dual strike whatever it was called... Is literally just a direct prime roughcut with less ammo😳
I...but...good lord...you are right!
Where did you get your hades at if it shoots 100fps?? I only get 85
Captain Xavier Could the Thunderhawk clip simply be packed with two or three Rival rounds per chamber to achieve a shotgun effect? I don't have anything in my arsenal right now chambered for Mega except a pair of Magnus (Magnuses? Magnii? Magnese? Whatever...) so I don't have anything that will let me check the fit.
No only front loaders to that and the thunder hawk has to long of a barrel
^ What he said. I doubt it would have enough power to clear even 1 Rival round.
Also, the plural of Magnus is Magnoxen.
Hey Capt. What u mean by squared ends on the springs and if not squared what is your alternative?
I mean that the last coil is bent so that it is...flat? Squared? Perpendicular to the rest of the spring?
@@CaptainXavier Thanks. What do u use to bend it?
Pliers
@@CaptainXavier Thanks Capt. Will give it a shot tomorrow.
How many coils were there in the Thunderhawk to get it up to ~90FPS? I actually love how bizarre the thing is but I just wish it shot a bit harder.
I think around 17-18. Based on the evidence in the video.
Brilliant, thanks.
Thunderhawk?
Don’t you mean *L O N G B O I*
I really want to mod my Hades to match the performance of my Nexus Pro but that thing looks impossible to put back together.
In case anyone didn't know the thunderhawk is only about a centimeter longer than the centurion
Personally I think the hades is a good blaster with the stock spring.
Do you think Darth bane successful essence transferred in to Darth zahanna
What
I would like to see somebody make one of these look like a rail gun
Can you use a k27 spring?
Just asking if it would be better
Does k27 spring exist? I am not familiar with that one. Who sells it?
@@CaptainXavier i am new to this springs type but what can i do to my lefted prime spring on my thunderhawk, should i just replace the spring with k26?
The fire power and its performance decreased 😕
Well, unfortunately, as I said, I wasn't even aware of the existence of k27 until today, so I can hardly give any meaningful advise as to its use. I am, however, very familiar with k26 and find it works very well in Rival and Mega blasters. Take from that what you will. :)
I need help. I did this upgrade, It worked fine but, the when I tested the de-prime it locked up. I took it apart again. I tried a longer K26, 14 coils is too much. It won't catch. I went back to the 12 coil K26. Put it back together but, now the balls basically travel about 10 ft. I have no idea what the problem is? Please, do you have any ideas?
Sounds like you fouled a seal somewhere when you reassembled it. Check the plunder O-ring and barrel seal.
I just finished putting it back together. That's what it felt like, that it wasn't sealed somewhere. I re-lubed it and it's working fine now.It's a nice upgrade since my Hades was already primed from the factory. Thanks for the advice!
I'll have to talk to you this weekend about how you got 15 coils in there. See ya then!
Does the hades have a air restrictor or anything like that im scared to dry fire it
Yes. Dry Firing is never a good idea but it won't break it.
@@CaptainXavier ok i was wondering because it sound likes the plunger is hitting pretty hard and I'm paranoid about that lol but it does have a ar?
I am so disappointed with the grey trigger thunderhawk. It fires maybe 8-10 meters flat, while shouldered, which means it is ludicrously gimped. Sad to see that even k26'd its terrible.
Pastebin is updated, thank you for the great vid as usual.
I have a crazy idea, how about a rapidstrike
Wow...great idea. Did you come up with that all by yourself?
Would you kindly do a mini-episode when you find a fix to the Hades stock? That is the only reason I don't like mine. Also do you have thoughts on Truck-bed liner for rubberizing something like the butt of a stock?
Did we already have the x-shot regenerator in can it take a k26?
Not yet
Xaviers lego has been sent
Did you end up modding that thunder hawk?
Nope
How about can the ERTL Rapid Fire Shotgun, the Air Zone Triple Shot, and the Sureshot Hover Blaster take a K26.
I have done the Tripleshot already. The ERTL is on the list. Never even heard of the last one.
Would k25 be worthwhile to put in a hades?
If you want it to hit lighter than stock, sure. Otherwise, no.
Captain I have a question...
why do you have so many k26 springs and where do you get them from??!?!?
...seriously?
well you responded quickly but you still didn`t responded my question xD
and yeah i know im not that informed but im still curious
I did not answer it because I literally answer it IN THIS VIDEO! I provide the link to my source on screen...
oh.... frick i screwed it...
sorry didn`t really watched the video
He improved a rival blaster, he is god
''A word from our sponsor'' 😂
Zero Blade “phantom.”
why not modify the Prometheus as much as possible to increase fps
I give up...why not? I mean I already have so...
huh, what'd ya know? it looks better without the telescoping thingy.
Holy God, I admire your patience in taking that bitch apart twice.
You can the k26 to make it fit
...what?
Can it take a K26?
Captain Xavier edition
Pre-watch predictions: both yes
Praise the Hades
Yay!
Your the best cap
You sounded like a father who wasn't angry, just dissapointed in his son(Beret), which may or may not be fitting with the age difference.
Phantom.
Hey cap turns out I did have a stroke cuz the comment you left me made me laugh so hard my face sagged over xD
next series idea: can it take a K36
Is k36 a thing?
Put a K26 in a flywheel blaster >:]
Already have...like...two years ago...try to keep up. ;)
Captain Xavier lol ok. And now that I rewatched the beginning, you literally tried to jam in a K26 into, what seems like a rapid strike.
Remove air restrictor, pad plunger head
That's not a good idea on mega blasters
And because the clip and plunger don't seal together the best.
I found it worked great, 12kg ret spring. Anyway, the shell is useful for integrations.
Oh god, the Thundehawk. Remove from table. Place into trash.
Also HELLO SIR BERET Y U NO INVITE
Spoken like someone with no imagination or skill... ;P
But seriously...the Thunderhawk is pretty trashy...
Aaaaand now I have a broken Hades.
Physically broken or you just don't know how to reassemble it?
@@CaptainXavier plunger rod snapped in half on the second shot- and yes I remembered the little screw. Can't seem to find a replacement either. (sniff)
How on earth did that happen? O.o
@@CaptainXavier God only knows. Maybe 20 years down the line, I'll find a replacement kicking around a thrift shop. :/
Captain Xavier do can it take a k14
No idea. Never had any k14
Captain Xavier k26 can fit inside of it
@@endrlock did you miss the part where I just said I have never had any?
Captain Xavier I did read that I was just giving a fun fact also I think you can get it from McMaster and if you do get some try it with reverse plunger blasters I actually might fit around some of them
A k14 is what you put in a caliburn if you wanted to hit 300 feet per second
Why is a K26 called a K26?
Because "K26" are the last three digits of the serial number for it on McMaster-Carrs website.
Hades is bae
Harmonica _clip_
What?
Clipazine
Ya know what i get sick and tired of upgrades breaking the plastic gears and parts so i wanna see a video were we replace the plastic gears and parts with strong steel machined parts. Call it "Beef up"
can a k25 take a k26?
Yes
Now to convert to elite, and
I was the 500 person to like this!
I have the hades
Hi
hi
Thou shalt not taketh the name of the Lord your God in vein...
How would I inject the name of my God? Like...write it on a piece of paper, burn it, powder the ashes, dissolve them in a saline solution, and shoot up?
@@CaptainXavier not you, your asscociate did it. And he spoke it.
Now you are making even less sense. If you are referring to something he said why are you admonishing him for injecting something?
@@CaptainXavier I am simply quoting the Holy Scripture and what they have said. More accurately "THE 10 COMMANDMENTS" I was just tryna be humorous obviously i failed
@@CaptainXavier either way your buddy has sinned and he must repent lol 😂
this is my boomstick (Bruce Campbell)
Sadly you are still to busy to do something with that drain blaster I sent you. Really hope you eventually can do something epic with it
I love how terrible the thunder hawk is its just not good
Seems like the “first” mega of either series is fucking horrible...only words I can use, BUT WE HAVE HOPE, IF THE PROPHECY IS TRUE THE SECOND BLASTER SHALL BE AMAZING
31st lol
Well, my good Sir. I'm reasonably certain I have a Modified Megalodon that could easily tag you at 60' with it's Ammo (1/2dart-Mega-Slugs). You're welcome to check out my Instagram page for a picture if you wish. After all, if it weren't for Yourself, Walcom S7 and his dirty-shot-gun-obsessions, and DrFlux. The Lever-Action-Prime (EVISCERATOR MK5) might not exist. MrScott54, BionicBlasters.😉😃😁😇🤓😎🤠