How To Remove Vinyl or Linoleum Flooring -Jonny DIY
Вставка
- Опубліковано 2 сер 2024
- How To Remove Vinyl or Linoleum Floors. Easily Remove Flooring & Glue with Tips & Tricks to Make the Job go Smoothly.
TOOLS & SUPPLIES
Pry Bar Scraper- amzn.to/2XOxrbf
Heat Gun- amzn.to/2UZngn6
Utility Razor Knife- amzn.to/2rIeUQP
Respirator Mask- amzn.to/2MwNO8O
N95 Mask- amzn.to/2z4bpdP
Safety Glasses- amzn.to/2XXe3dI
Leather Work Gloves- amzn.to/2x5BZk3
If you Enjoy the Channel Consider Helping Support it by Donating below & by Subscribing.
PAYPAL DONATION www.paypal.me/JonnyDIY
Zelle Donation JonnyDIYs@gmail.com
Venmo Donation JonnyDIYs@gmail.com
Thank You for watching, Subscribe & Click BELL Icon To Enable Notifications for NEW Upcoming Videos, Give a Thumbs up, Leave a Comment or Question, & Share, I'd appreciate it tremendously! :) Remember to Keep on, Doin it Yourself! - Навчання та стиль
*TOOLS & SUPPLIES & DONATION LINKS🙌*
Pry Bar Scraper- amzn.to/2XOxrbf
Heat Gun- amzn.to/2UZngn6
Utility Razor Knife- amzn.to/2rIeUQP
Respirator Mask- amzn.to/2MwNO8O
N95 Mask- amzn.to/2z4bpdP
Safety Glasses- amzn.to/2XXe3dI
Leather Work Gloves- amzn.to/2x5BZk3
*If you Enjoy the Channel Consider Helping Support it by Donating below & by Subscribing.*
*PAYPAL DONATION* www.paypal.me/JonnyDIY
*Zelle Donation* JonnyDIYs@gmail.com
*Venmo Donation* JonnyDIYs@gmail.com
if you're concerned with asbestos, realize that the particles of asbestos would remain for a long time in the air after you removed the flooring. The respirator gives you immediate protection but the fibers could remain airborne or on your clothing for days... test first if you suspect asbestos. Then take proper steps (PPE, filtration etc.) to protect yourselves and family members.
This was SO helpful! Struggled for 2 days trying to remove the adhesive on my kitchen floor. After watching this video, I applied boiling waters to the floor and covered with towels to keep in the moisture and heat. After 15-20 minutes, it came off with a scraper very easily! What would have taken a week, will now be done today.
Awesome, so glad my video was able to help you tackle this job 👍
bruh i just came from a video where the dude was like "if the glues not coming up very easily, sometimes its easier to just cut into the top layer of subfloor and remove that" i was not at all about that sh**. Hot water and a towel? can do!! @@JonnyDIY
He is awesome, to the point and not drawn out, great presentation
Thank you Michael! 😁👍🏻
So helpful and easy to understand instructions. Thank you!!
You're welcome, glad I could help! 👍
If only mine were that easy!! 45 year old linoleum with a second layer on top. The glue from the original is a beast!!
Ohh mann, sorry to hear. Can be tough removing especially with concrete foundations. I would say just lay another layer on top. I think this floor had 3 layers of vinyl flooring hah
I agree. I wish mine was as easy to peel back like this. Mine is on a concrete floor and it certainly doesn't come up like this video.
Doing it this week my dude! Ripping subflooring today with the kiddos!
Awesome, that'll keep you busy in these quarantined days. Good luck with the project, sure the kids will love the demolition part 👍🏻
Nice Job Johnny... Thanks for providing the tutorial.
Thank you, & you're welcome, glad to help! 👍
Thank you
thanks Jonny, very helpful and motivating
You're welcome. Glad it was helpful 👍🏻
About to be a professional, thank you!! I just bought a house and I'm doing this same thing to my kitchen 😂 removing vinyl and putting in a nicer tile.
You're welcome, congratulations on the new house and good luck with the project! 👍
To remove the remaining glue try a 50-50 mix of fabric softener and warm water. Let it sit for about 10 min and then scrub/peel it off
thanks for sharing 👍
In the middle I of this, gonna try your method.
Helpful video. I've got vinyl in the basement that I'm considering replacing. Hopefully it comes up as easy from the concrete subfloor. Nice shirt. Go Stros!
Thanks! Glad it helped you out. Good luck with the project 👍🏻
Jonny DIY is it easy to install vinyl sheet
Not too bad. A lot easier than it used to be. Now that vinyl is a lot softer and pliable. Just make a rough cut first and take your time making final cut (make sure you have plenty sharp blades). And just like hair you can always cut more, but you cant add it back after you cut it. So really visualize cuts. Draw shape out on paper youre going to cut. That helps visualize
Thanks for sharing! Super helpful! :)
You're welcome, glad to help out 😀👍🏻
You just made me a lot of money today. Thanks man
Awesome. You're welcome, glad I could help 👍
Fast and easy directions thanks
You're welcome 👍🏻
Great tips for cutting along base cabinets, thanks!
You're very welcome, glad the video helped you out 👍🏻
@@JonnyDIY what would you charge for about 2000 SQ ft
@@aphysique best rate is to get whoevers installing to pull it out. And not sure about price. Different areas, different rates. It'll really all depend on time and how stubborn your vinyl is to pull up and remove
@@JonnyDIY I'm just saying a ballpark, a doll a sq is about right or no?
@@aphysique ohh no you should be able to find someone to come rip it out cheaper that that. Depending how stuck on it is I'd say 2 guys could pull it all out in a couple hours. 500-1000 more like it. Call around
Awesome. Thanks!
You're welcome, glad to help! :)
Awesome vid.I didn't know Joe Dirt had a DIY channel.
Thanks 😂👍🏻
Great job I need help lol... Thank you for your videos
You're welcome! Good luck 👍
Hot towel really works. Thanks
You're welcome, glad could help some 👍
thank you!
You're welcome, glad to help 👍
Johnny, I do have an older linoleum floor (pre 80s) and a respirator. Do I have to worry about lingering asbestos in the air or on surfaces after I pull up the floor? The floor is on concrete. Thanks
Theres really no way of knowing if it has asbestos being that age unless you have it tested. Can get information on that from municipal hazardous waste facilty. I would mask off the area with plastic to contain air to that space so as to not spread across house
@@JonnyDIY Thanks. This is probably nasty stuff. Pretty old.
@@jack.b.nimble7446 you're welcome, good luck with the project. Can use a garden sprayer or spray bottle to try and keep dust particles down too
I have never had a floor come up that easily.. did I miss something? Was there a first video?
Lol. No first video. Vinyl flooring was about 15 years old I believe. Guessing the vinyl glue had lost its grab. It still took a lot of pulling but if you got a good chunk started it wasn't too bad 👍🏻
@@JonnyDIY LOL. I thought all night long, dang, that was the happiest person I have ever seen that had to rip up a vinyl floor. haha. Have a good one and be safe out there!
Thanks, you too! 👍🏻
Just started working on ours. It is brittle and breaking off. Sadly a flooring store owner did this floor and they did not even cut the edges off near the base cabinets. Rolled up agains the cabinets. It is directly on concrete. Doing mask just because of the dust. This flooring is pretty thin and going to have to do lot of scrapping after getting floor up. Some sections came up in longer pieces. We are doing a kitchen remodel and good part of the work we are doing to keep the costs down. If anyone has any suggestions, let me know. We went on to another projects. Now back to get this done. It is coming up in small (maybe 4 inch chunks) pieces. Tried soaking sections with water over night to get an edge to work under in spots. Slow process. Also this flooring is probably 40+ years old and very thin. Vinyl sheet. They also went nuts with wallpaper--3 layers and later found 2 additional styles behind a cabinet. No backs on any cabinets. Found all the wrong things they did. It will be nice once complete.
whoever built my last house went crazy while installing the kitchen floor and we only learned about it because we renovated the house before selling. Pulled up the laminate and the under part had been stapled in about a bazillion times. Honestly there was probably about 35 of these thin little staples per 2 square inches. Everybody got a turn going at the staples, I got there late and I still got myself a two foot spot where most of the staples had been removed, but I had to take out like 200.
I have no idea how anybody installs something like that. Somewhere along the lines, as they're sending in their 50th staple while sitting in the same spot on the floor, you'd think they'd think to themself "there's gotta be a better way".
Thanks Jonny 🫡
You're welcome, happy I could help 👍
Thanks Jonny! Question for you.. I'm about to install those new popular vinyl planks all through my house. I've got to smash the tile in the kitchen. Under that is a layer of vinyl. Do you think I should keep the vinyl as a moister barrier or rip it up? The vinyl plank are supposed to be moisture resistant. Thanks!
Its up to you. If the vinyl is in decent shape, not all wavy and damaged, but level and smooth. Just clean it well and lay it right over it.
@@JonnyDIY I just wanted to follow up on this. I removed the tile. The vinyl was there, but had hundreds of nails in it due to the cement board. After a few hours of pulling out the nails, I knew the vinyl wasnt any good. When I pulled it up, I found that half of the subflooring underneath was rotten. Apparently the vinyl trapped moisture inside. Didnt help that I had insulation under the house. I ended up ripping out half of the subflooring and replacing it with new plywood. Glad I ripped up the tile or I would have never known.
@@KentsGarageGym wow can of worms! Projects always seem to snowball dont they. Well Im glad you found that out and put some new sturdy plywood in. Feels good when you fix something like that 👍🏻
Kent's Garage Gym what state did this happen in?
Jonny DIY do you think it matters? We are thinking about doing new Vinyl and new toilets in two bathrooms.
Thanks
You're welcome, happy to help 👍
Excellent information, thanks!
You're welcome, happy I could help 👍
@@JonnyDIY I’ve been scraping old glue by hand with a putty knife. Just finished following your instructions on getting it wet and soak it overnight. Your a lifesaver!
@@RobbieBobbie98 awesome, glad the video was able to help you and save you some time and save your back a lil too! 👍
Yuh, you got lucky. That came out pretty easy.
Yeah when it's bonded to concrete it's a lot more tricky for sure 👍
Johnny, what do you think about putting floating laminate wood flooring over existing vinyl/linoleum flooring in a kitchen? No gouges or anything, just old and ugly. The laminate I have has padding attached under it, but I also bought the Pergo Gold underlayment . Use it or not?
No problems installing over vinyl as long as floor is nice and smooth/level. I would just use the attached underlayment and return the other 👍🏻
Love the fingerless gloves u showed up at my house looking do work looking like that I'd be a little worried
Thanks haha, fingerless gloves are great, keep me from bashing up my hands so much 👍
Question!? Do you have to remove the baseboards if you want to remove your vinyl/linoleum flooring?
If the baseboards were run over top of flooring usually yes. You can try removing a section of flooring by baseboard and see if you're able to pull it out from underneath the baseboard. If theres caulking between floor and baseboards score that with utility knife first
You should be able to pull it out now thinking about it. Whether or not new flooring will fit under baseboards is something else. A lot of times you can just add some quarter round trim or base shoe molding to cover new gap between the flooring and baseboards
My linoleum is glued down to my terrazzo. I want to keep the terrazzo in tact but it's been a pain. I've been using a heat gun and only have a small patch done.
That's probably the best way to prevent from damaging your flooring beneath it.
Can you go straight over the top of some old vinyl tiles that have been down for an eternity?
Yes, that is safe way to not disturb old floor tiles and kick up any potential asbestos. Just go right over the top 👍
I myself would have moved the stove and changed the linoleum under it too. Seems like that would be the right way.
Yep that's exactly what I did, just held out moving it til the day I put the new flooring in 👍🏻
I can't move mine so I'm going to just put it as far as I can get it and if that happens I would then put the balance Lol 😁
I just started pulling up individual square tile in kitchen and it's plyboard, very sticky adhesive, can I just lay new tiles down with more new adhesive? Do you have to take old adhesive off?
Yes you can just lay it right over the old 👍
@@JonnyDIY wow. Thanks for answering, I honestly didn't expect that! I'm SO glad to know I don't have to kill myself to put down some new stuff, im not exactly young, and definitely broke, ha ha. Thanks
Do you think I need a mask for 15 years old house? what if my subfloor from my bathroom is wet but no mold. Do I need to remove it?
No you should be fine. But if you have any sort of dust mask aleays good idea to wear. Only need to replace subfloor if wood is wavy or bubbled. Put fans and cat litter on it to dry it out fully before putting any flooring back over it 👍🏻
@@JonnyDIY I only see a raised tile sheet in a square foot area...I am concern it may have mold down there..I thought as long as it's wet we have to replace it entirely since it's lose its support due to moisture
@@TheCupfulBoy yes youre right it does lose strength if particle board. But if plywood. Its ok to just dry out if not rotten
@@JonnyDIY How do I know if it's plywood or particle board
Particle board or osb "chip board" looks like a bunch of little pieces of wood glued together or even sawdust glued together. Plywood looks like wood with long wood grains and visible knots and such 👍🏻
I want to take the carpet out and lay laminate or cork flooring and have a good underlay to protect from the very cold cement. Not sure if damp comes from it. It's surely very very cold. However, when I lifted the carpet I found old linoleum in parts of the flat. I started removing it but it's such a big job. With a steam machine, it was much harder than what this video shows. It doesn't seem right to me to lay a new floor on top of old plastic. Doesn't the cement need to breathe?
You can put the new flooring right over the old stuff without issues 👍 as long as adding new flooring doesn't cause any height issues
@@JonnyDIY thank you. I find it so odd that that can actually be done. It doesn't feel right to me. But I hear you. I suppose I have to get used to that idea.
@@ninunife5242 it's completely fine to go over it as long as it's stable and not some old stuff thats crumbling apart. I usually remove it if it's not too bad or if I need the height
ahhhh!! looks like a lot of work I'd need a helper !
ahhh so many views on your vinyl video !
So, they laid one layer over another older layer ?
Yes, quite typical. Vinyl is so thin you can just keep adding new layer right over top. 2-3 times
Can you post 2nd part? How bout them Brown's 👀
Gosh. Wish ours was pulling up that easy. What with the difficulty, and not knowing if there's asbestos in it, and the fact that where an island used to be the subfloor is at the height of the linoleum, we're just going to do laminate over the whole mess. Down the road when we have money to hire a pro we'll do it right but for now it's gotta be quick, cheap and easy -- just like my wedding night.
Sometimes its easier to just cover the whole thing up, I think yall have the right idea 👍
how do you remove that kind of glue from wood subfloor?
Hammer and chisel or scraper or long stand up scraper. Or demolition hammer with scraper bit
mine was glued (liberally!) to some underfloor hardboard.. after trying a heatgun I had to use a multitool to do it. Peeling back by hand was a no-go due to the amount of glue used unfortunately
Dang yeah, depending on type of glue and surface its glued to it can really be a pain! Glad you gott it though 👍
First good tips but i would contains the area with 6mm plastic and done containtment seal all vents and use a negative machine air scrubber.
Not bad bud but, you might want to think about also removing the dishwasher if you plan on putting down tile. If not, home owners will have a tough time trying to replace it now that tile is down since you have little up movement from the counter top on top of the dishwasher...just a thought. 😉
Thanks Chuck, good point. I actually replaced dishwasher and ended up putting new vinyl in. Yes you wouldn't want to tile around it if tile was so high you couldnt remove it later if need be 👍🏻
Where I live, you always have the floor tested for asbestos first. If tested positive, then you need a full abatement of that area. I would never just assume the floor may have asbestos, if there was asbestos in the flooring, you now have compromised the entire house. Protect yourself and your clients.
I knew for certain this didnt have asbestos, just wanted to alert people of the possibility
But yes youre right. Dont go stirring up asbestos.
Also good to protect from mold.
He puts a mask on but doesn't protect any of the kitchen. There is even dishes in the sink. Do you think the dust and crap is getting in the cabinets and on every surface of the counter tops? yes. That's where the home owner prepares food.
@@JonnyDIYwhat year was it installed?
I have a question what should you expect underneath your floors when you take the linoleum out.
Depends what kind of foundation. If you have wood foundation you'll probably find wood subfloor or underlayment. If concrete foundation youll find just the concrete floor. You may also find previous flooring as well. And also you'll probably find the vinyl flooring glue underneath
Thank you!! I have some project a to accomplish and this is second on my list. So wish me luck. 😀😀😀
I have wood floors through out my house but not sure about my kitchen. I will let you know how it goes. Thank you
@@mamatis4520 You're welcome, glad to help. Good luck with the projects! 👍
I have flipped 13 homes all up and down the West Coast. NEVER put water or a soaked towel on your sub floor. It can cause warping, rot and damage making the sub floor uneven and you unable to put tile or hardwoods down and make it level. Get a 5" floor scraper which is a razor edge. AND ONE LAST FACT: what you think the hot wet towel is removing isn’t glue at all. It’s the usually tan or gray paper backing to the one piece linoleum flooring left behind when you pull it up. GLUE FOR FLOORS IS NOT WATER SOLUBLE. IT IS CONSTRUCTION GLUE and waterproof.
Good point on wood subfloors. My tip about the towel with hot water was for concrete slab foundations 👍
My subfloor in my kitchen has water damage, how do you rip that up and replace it?
It involves cutting out sections and prying up nails or screws. Then laying down new plywood. Screw and use construction glue to prevent squeaks. Here's a video I did removing underlayment which is same process
ua-cam.com/video/vEZsQtlOj0Y/v-deo.html
@@JonnyDIY ill watch it either during a break or after work! My dishwasher sprang a Horrible leak 1 night and just dowsed the floor, this was like 4 years ago. Now that I'm sober I'm gonna get it all repaired and replaced soon
@@thehorseman1806 yeah similar happened to me, except it was water line to refrigerator. Congratulations on becoming sober, 1 day at a time
How old would the linoleum have to b that u would need a mask. My house built in 1989-1991. Not sure.
You're most likely OK as most stopped using around late 70s, but if you're in doubt you can always get a test kit and it'll give you results right away 👍
well you proved thoase professioals wrong...anythngs possible and you just proved that weldone:-)
Thank you 😀👍🏻
Oh if only. The vinyl I’m trying to lift is really glued down. So far has resisted everything, heat gun, scrapers. Literally can only manage an inch or two at a time and that is really hard work.
Try the boiling water on towels method I mentioned. Has helped others with really stubborn glue on the vinyl
@UCZZYKB60edjrNmA1lE57Wxw Yes I saw that too. I had that idea in reserve but was worried the shear amount would kill my saw. So I persevered, working with my son, we cut the vinyl into 4” strips, then one scraped as the other pulled. Hard work but we got it all up in the end. Took about five hours in the end - sore hands but a good exercise workout. Intrigued by what the flooring installer told me when he came to latex the floor - he said that he would have just hired a vinyl lifting machine - intrigued as to what one of those is.
@@nheather Glad you two were able to get it all done. That's great. Ohh yeah its like a big scraper kinda machine thing. Ive never used one. I imagine it would make fast work of big jobs though. Hope the replacement floor comes out looking great for you 👍
@@JonnyDIY looks great with the latex down. The flooring will go down in two weeks time. Cutting the vinyl into 4” strips was essential. Any wider and the grab from the adhesive was just too much to overcome by me
Do i need to wear one?
In case of old asbestos in the glue or old flooring 👍🏻
Asbestos can also be absorbed through the skin. That's why you see asbestos removal companies wear tyvek suits, gloves and respirators.
Yes, you're right. Thank you for sharing
Good idea to leave a water-soaked rag on your subfloor overnight. What a hack.
Thanks! It works great with concrete slabs and hot water on the towels. Some vinyl can be super stubborn to come off 👍
HEY MAN I HAVE BEEN BUILDING AND REMODELING FOR 55 YEARS AND I HAVE NEVER HAD VINLY COME UP THAT EASY I DON"T YOU HAD GLUE UNDER USES
Got lucky I guess. Maybe because it was over a particle type underlayment and not concrete or plywood
Did it the hard way propane torch on low comes right up
Awesome, good idea with a slab foundation and careful of the fire
@@JonnyDIY I do it on all types of floor you just have to be smart with the heat.
@@bobjones8378 nice, thanks for sharing. Will have to give a try with a stubborn floor. May need remove some vinyl from bathroom in near future
@@JonnyDIY Sweet,hope it helped
Anyone who thinks there's asbestos in the product, SHOULD NOT disturb it. have it tested first for asbestos.
My kitchen sink led to my floor splitting. Underneath it's all wet and grey. I have no idea how long it's been like that.
Had same problem before with a leaking fridge ice maker
@@JonnyDIY I'm assuming the grey liquid is the adhesive. I just lifted the WHOLE floor up and it's wet. You think I should cut it out for the sake of it drying? Thanks
@@johnnykurplutzo6789 if its plywood you can put fans on it and dry it out, once dry you'll be able to tell if its weakened by the moisture. Then replace sections as necessary
@@JonnyDIY thanks for the reply. I'm gonna cut all of it out because I just lifted the whole thing up because it's that bad. I wish I saw your vid first 👀
Where's the next segment?
Floor prep for new flooring 👍🏻
ua-cam.com/video/1wLWHrsEc78/v-deo.html
I see u are wearing a respirator, but dont you think it would be smarter to have the flooring tested first, incase it does contain abspestos? I would think that u wouldnt want that stuff airborne. I have always heard that you shouldnt cut it or mess with it for that reason.
Correct, mine didn't havd asbestos I was just wearing for dust. When in doubt should have tested and not disturb in mean time. That or go over top of it and encase it
Laid top layer over initial asbestos layer would be my guess. Lot of panic in late 80s early 90s and people would rather lay over than disturb the fibres. .
Maybe tell your viewers to test that linoleum for asbestos before beginning
If what you just scraped up was asbestos, then that area would now be contaminated.
Good point, always want to test 1st if you think there's a possibility of asbestos 👍
Just fyi its called underlayment and under that is the subfloor
Yes, you're right. Thanks Jake! 👍🏻
If mine came up like that I wouldn't be watching this
Oh my god thank you this vinyl is the fucking worst in my new house and I didn’t wanna pay people
You're very welcome, happy to help. Good luck with the project 🙏👍
How is it this easy to remove vinyl flooring?
Easy is a relative term 🤣 Was easy for me, but may be harder for others. Really depends on the age/type of vinyl/linoleum and the kind of adhesive that was used originally
Try that on a house built on a concrete slab LOL
lol get the scraper out! 😁👍🏻
Wish mine just rolled up 🥲
May need to get a flooring scraper to help
Lowes calls me at the last minute to say that they do not touch the linoleum when they do installation.
Ohh boy sorry to hear, hope it's not too much of a bear
That floor looks a little new for a spesto
Yes you're right, just mentioned to warn people of the potential 👍
1:27 This is seriously how my floor looks WITH vinyl. Landlords use this cheap garbage because it yellows over years and they can then blame you and keep your deposit. Vinyl is cheap for a reason. its garbage that doesnt hold up. You need 14 rugs down to cover the floor then they come and go "what happened here, what did you do ??"
Yes the newer vinyl seems softer and easier to damage now too. Only advantage is it's much easier to install
Why the mask, asbestos?
Precautionary. In my case there wasn't any, but I wanted to show there is a chance yours may have it depending on age of flooring
Why did you wear a mask?
To decrease inhaling fiber, dried adhesive, and potential asbestos. It can't hurt to wear it
Im doin this kinda stuff when im 11 i feel strong >:3
great job! keep at it! 💪😃💪
that vinyl flooring is so ugly
Haha that's why I tore it out! 🤣👍🏻
Don’t need a how to video for stuff comes up like this. Try a couple layers from 70s,80s.
At least this guy wears a mask. I feel sorry for the home owners, tho.
I knew for certain there wasnt any asbestos as the vinyl I took out was about 10 years old
@@JonnyDIY you literally said in the video you were wearing the mask because the vinyl could have asbestos?
@@MrJaybeezy123 it's always a possibility. I try to pass the precautionary measures on to the viewers. I have come across asbestos in flooring before. Stay safe 👍🏻
@@JonnyDIY thank. Do you think you could tell when a certain vinyl was made by how it looks (style, etc). Also, will a 3m p100 respirator really protect? It's the one with the cartridges that protect against organic vapor/particulates. The bigger bulky pink cap ones. Thanks again!
Yes the P100 is a great filter to use for this. If you suspect the vinyl is older than 1980, assume it may have asbestos and take precautions 👍🏻
This video is full of bs
@@numan_atl only the best! 😆👍