I have one just like this engine and from the sea trail engine doesn’t run at top speed something is still wrong probably a foul plug. But if you can send me the link to get the overhaul kit that would be awesome.
You have put a lot of work into renovating this Yamaha two-stroke outboard. An interesting technical solution from the Producer: the ignition advance is assigned to the throttle angle, not the centrifugal force! Congratulations and best regards 😀.
Was it seized? Because if not it definetly did not need a full teardown. If you are doing a full rebuild like this, replace the impeller and gaskets, it is supposed to be done once a year.
there is no torque, they used the drill for everything which is 740 ft.lbs. of Fastening Torque which is dangerous for the life of the engine given that the correct torque was not given in the important parts souch as the head or the oilpan/crankshaft. Its economic at least 👍👍
The master mechanic successfully restored this Yamaha engine from broken to new again..Very awesome job big friend 🔧🔧🔧🔧🛠️♥️♥️♥️🇷🇴🇷🇴
Bravo ottimo lavoro ottimo video al prossimo
Good ❤❤❤
Hola bro, tengo un motor mariner que solo tiene chispa en una bujilla, las cambié y sigue igual, que me aconsejas
Please review high voltage
Good job
Ellerinize sağlık büyük usta. Bu motora anahtarla çalıştırma yapabilir miyiz? Marş dinamosu?
That's also a good idea
Can we make a 25 hp starter dynamo for Yamaha?
Great job!
Thank you very much.
Mantap ♥️👍👍👍👍👍👍
Thank you very much. Please follow and support us!
I have one just like this engine and from the sea trail engine doesn’t run at top speed something is still wrong probably a foul plug. But if you can send me the link to get the overhaul kit that would be awesome.
Thank you very much. We will send you the link to that kit soon
Clean the carby
Great work but i noticed that the engine isnt throwing out any water.. bad impeller?
Thank you very much. You need to carefully watch the video. The machine works very well
thanks
You have put a lot of work into renovating this Yamaha two-stroke outboard. An interesting technical solution from the Producer: the ignition advance is assigned to the throttle angle, not the centrifugal force!
Congratulations and best regards 😀.
Thank you very much.
It's a boat from Soviet Union. Brent of boat Crimea
From which country does this movie?
Thank you very much. Please follow and support us!
Nice job but should have changed the impeller
Thank you very much. We tried to restore it to save costs for the owner
Was it seized? Because if not it definetly did not need a full teardown. If you are doing a full rebuild like this, replace the impeller and gaskets, it is supposed to be done once a year.
Thank you very much.
*recommended* torque
there is no torque, they used the drill for everything which is 740 ft.lbs. of Fastening Torque which is dangerous for the life of the engine given that the correct torque was not given in the important parts souch as the head or the oilpan/crankshaft. Its economic at least 👍👍
@@Adlwarth that was the joke I was making.
I like
Thank you very much. Please follow and support us!
Did you forget to maintain the impellers? Engine water drainage is poor. I think it's an engine from 1997-1999.
Thank you for your feedback so we can improve future products. Wish you good health.
Tiệm mình ở đâu vậy bạn ? Mình cần liên hệ Tiệm
Thank you
schade das ihr soweit weg wohnt, sonst hättet ihr mal nach mein motor schauen können
If possible we will help you fix it.
Один вопрос - как туда попала лодка Крым ????
I think the engine doesn't run properly, there must be a problem with the fuel and electrical system
Thank you for your feedback
Wow
это конечно не ремонт лодочных моторов Уссурийск, мотор раскрутили как новый ни одного заломонного болта
❤
Лодка крымка у меня тоже такая
Thank you very much . Please always follow and support us!
Di mana ne bang tempatnya
beautiful country Vietnam
This engine not need a restoration
oh no. it was seriously damaged
die müssten mal nach mein yamaha motor gucken
Thank you very much.
❤Lⅰke
Good job
Thank you very much. Please follow and support us!