WHEEL ADAPTERS (CHANGE YOUR BOLT PATTERN)
Вставка
- Опубліковано 3 сер 2017
- WANT TO CHANGE YOUR BOLT PATTERN? WELCOME BACK RIM LIONS, SO TODAY WE ARE DOING A VIDEO ALL ABOUT WHEEL ADAPTERS & WHAT THEY DO!! SO BASICALLY WHAT IT DOES IS IT WILL CHANGE YOUR BOLT PATTERN, SO YOU BOLT ON YOUR EXISTING RIDE, AND THE STUDS STICKING OUT ARE FOR YOUR NEW BOLT PATTERN. SO THIS FOR A 8 LUG GM TO 6 LUG GM. WATCH AND SEE!
CHECK OUT OUR OTHER UA-cam VIDEOS!!
FOLLOW HILLYARDS RIM LIONS:
WEBPAGE: www.hillyardwheels.com/
FACEBOOK: / hillyardsrimlions
INSTAGRAM: / hillyardsrimlions
TWITTER: / hillyardrimlion
SNAPCHAT: rimlions577
VINE: vine.co/Hillyards.Rim.Lions
FOLLOW: AMAR SIHRA
INSTAGRAM- / amarsihra
FACEBOOK - / amarsihramusic
TWITTER- / amarsihrareal
UA-cam- / @amarsihra5219 - Авто та транспорт
I hate videos when the creator never answers questions from comment the section 😂
Is it OEM grade stuff or is my wheel going to fly off?
How much more do the tires come out with the wheel adaptor?
Have a 2001 INFINITI QX4 6 lugs 12mmx1.25 17 inch wheels. I bought a set of 2018 Toyota Four runner 17 Inch 6 lugs 12mm x1.50 what do you recommend ?
i have a 01 f250 with 8x170 pattrern would 6 lug adapters be ok?
I have 5 lug universal adapter I need the bolts going the other way, can I nock them out and put them in the other hole, it lines up that way
I have some rims that are 225/45r18 that have a bolt pattern of 5x105 but I wanna put it on my 2022 Camry that has a bolt pattern of 5x114 would this adapter work or no honestly?
Do I have to use both plates or can I use just one don't want my wheels to stick out too much
I HAVE A SET OF 4 LUG RIMS I HAD ON MY HONDA BUT MY HONDA DIED AND I BOUGHT A CHEVY 2011 HHR AND IT HAS 5 LUG. WHATS MY BEST ROUTE TO GO SO I CAN MAKE MY RIMS FIT? IF THEY CAN FIT
It can be a wheels with a different hub centric?
Hi I was thinking of putting new Camaro wheels on my 68 Chevelle. The adapters would have the larger studs for the Camaro wheels and the torque is 140 lb on the Camaro. Can wheel adaptors take that much torque
I have a 2018 ram 1500 5lug but want a adapter to fit 6lug Silverado wheels, where can I find one
Can I somehow do this to change the Stud Size? I want to put a 12x1.50mm Stud size wheel to a vehicle with bigger size 14x1.50mm?
They both have the same pattern 6x5.5" (6x139.7mm).
So i just now ran into a problem, i have a 2008 bmw 328i. My bolt pattern is 5x120. I ordered my first set of wheels for my birthday 2weeks ago, I gave them the right bolt pattern on my order, ordered the right pattern everything was fine, get them in 2 weeks later and i see the box has 5x114.3 bolt pattern, so nervous havent seen if they fit yet, if not. Where on earth can i get safe and reliable wheel adapters, without going through the trouble to send them back halfway across the united states!! Thank you so much, im new to this and needing help ASAP!! :)
hi i had some 24"s from a 2003 ford expedition and now i have a 2008 chevy avalanche where can i purchase some wheel adapters to convert from a 6 lug 2003 ford expedition to a 6 lug 2008 chevy avalanche can you send me a link or post a link please so i can purchase them since my expedition got rear ended but i just had purchase new tires on my 24"s i think its cheaper to buy adapters than buying new wheels and tires thanks
Doesn't a wheel adapter push out the wheel, that things got to be at least 3 inches thick, what if you can't afford that much space.
Can you show us the box where the wheel adapters came from please.
I have a trailer with 4 bolt hubs and wheels from a ‘65 Ford Falcon, it looks like ford falcon 4 bolts are different. Is that true? I can buy 2 nice one pretty cheap
I’m looking to buy rims that are 6x5.5, 6x135 to fit on a bolt pattern that’s 6x5.5, 6x139.7 what would I need to make the rims fit properly?
I have a 65 for 2 wheel drive dually 6 lug bolt pattern. Hard to find better rims for it so I figured I get the 6 to 8 wheel adapters if they make it. Any thoughts
Andy Valdez adapters are being used, but a 6-8 lug I'm a little hesitant on that since the load check.with the manufacturer
So the wheel adapter doesn't have extra holes in it? Also I have an original trailer hub which came with 2 different stud patterns from new. Or how about Multi-stud pattern wheels? All no good according to you, right? If it is done at an engineering shop, what's the problem?
Good vid
ihave used these,and I now have a set on my dodge 100 big block,if installed correctly these are safe to 85 mph,wouldn't take them any faster,breakage,no,fear factor and strength factor,i mean after all we are limited by a speed limit,mine are for using Chevrolet wheels on my d100 that compliment it,and I don't exceed posted speed limit,use the green Loctite on the bigger wheels,torque to spec or find someone who knows
Where did u get them
@@raullevriejr2623 midwest motorsports in kc kansas,they are still in business the sell all of the hot rod stuff from old and they have connections to the strange stuff,if it's made or was made they can get it
@@strattuner thanks i will look them up
Just wondering if I could mount military hummer rims and tires on a old jeep
Can you tell me the adapter that I would need to put 17” Acura factory wheels on my 1997 Toyota Avalon...
Look at the bolt pattern on each and plug it into ebay
It’s still pushing the rim out farther right?
What brand are you using right there? I need to go the exact other way I have a Chevy 4x4 6 lug. I was given a set of 16.5” 8 lug 8 6.5.
So can you go the other way then?
Smaller truck 6 lug to bigger 8 lug pattern rims?
What you think BOSS BOSS?
did u say 8 lug ain’t no way
Hey mate i have an 8 stud and want to go to a 5 stud on a Pontiac do the wheel adapters make the stud hubs come out wider ???
that you may have to check online, also depends on both vehicle. all adapters will come out
Hi all...question..is it okay to put 1 adapter on 1 wheel for a set of ARE burst wheels that are discontinued but i can only get 1 replacement wheel.. which mine was destroyed ..i think it will work for the rear axle 4wd ford explorer...any ideas???thanks..in advance
Thanks man
I have an 2008 F150 lariat, which has a 6 lug bolt pattern need to change to 5. My trucks front in has 2 inch spacers lifted and have 22 inch rims I want to put on are there adapters avail that are centric avail ? Thanks
Brian Rumph hi sorry we don't sell adapters, only review them, since we only sell correct fitments
Do the wheels and tires sit flush or do they stick out 1-2 inches,
I have a 2002 F150 5x5.5 and would like to put on the newer 6lug f150 wheels any suggestions would help thanks.
Ever get the adapters? I got a set for an 01 im about to throw 12.5 wides on 35s on tomorrow.
Thinking of getting these for my h2. Have you used them yet? What are your thoughts are they prone to failure since only the inner is hub centric and not the outer??
havetn used them, i dont recomend them unless mandaotry, always get rims that are made for your vehicle,
H2 are heavy duty so i done recomend these
Do you have part number for this adapter. Need this same exact one thank you.
Where’s the best place to get a wheel adapter
can you do 4 x 108 to 5 x 108?
i went & looked for new wheels but man all of them have 6 to 8 lug holes & my car only has 4 so i'm kind of stuck i asked around & it turns out that i should buy a wheel with same 4 holes as my car
Yo let me know if you luck out I have a 65 mustang same problems
So I have a 98 F150 it’s a 5x135 I want to put mustang wheels on it which is 5x114 would there be a problem
trying to put on 6 lug universal 20" wheels I'm driving a 02 Ford Expedition 5x135mm I'm wanting to know what exact adapters would u recommend? and link
How safe are those ???
Alright so I am getting 8x6.5 wheels and I have 6x5.5 on my truck, I already ordered the correct adapters. I already have 2 inch wheel spacers installed could I stack it on top so I don’t have to cut my factory studs and I could just do it to the 2 inch wheel spacer?
Sheesshhh that’s a lot lol
The lugs are too spaced out to my 2005 Chrysler 300 and the rim I have the holes are little more closer how would I know to choose the right one the people on eBay aren’t helpful
Nice video bro
I have a 1963 ford Fairlawn with 13 in wheels a nd tires. Can I. Adapt to 14 in
Good information but I want 6 bolt to 5 bolt pattern adopters plz help???
I need adapter,s from 97 Camaro to fit 65 FORD TRUCK F100.
I have a 5 lug I wanna change to a 6 lug. Any ideas where I can purchase? I have a 2005 dodge ram 1500 4x4
I'm looking to do the same did you find anything that worked for you?
The adaptor brings the wheel out to wheel adaptor is thick
Do you have to take into consideration offset of the new wheels when adding these adapters?
James Garrity yes u do since its. Thicker it will push it.o her
Is that safe to use?
does this double as a wheel spacer?
yes
Where I can buy 6 x139. 7 to 6 x114. 3 wheel adaptor
How much for a pair of these adapters or where can i get them? thanks
berreta370 I don't sell them much best to get EM online I paid 85 each
Cool, where do you order them from? Thanks
I bought some used 24” rims they are 6 lug like my truck but the 6 lug pattern on the rims is slightly smaller than my truck which is 6 139.7
Supposedly they were on a 2012 Chevy Silverado which calls for 6 139.2 not sure if that’s why they don’t fit
But this sucks I just had brand new tires put on
Hey rob I have the same problem what did you end up doing to fix it?
How Much Do You Torque The Allen Bolts to?
Did You find out I need to know to lol
Kid Rock country
Can i put a 4 lug mustang rim on a 5 lug mustang
2018 toyota Corolla lug pattern 5x100 to 4x100
Ok so I absolutely know nothing about wheel conversion. If a wheel does not have the same bolt pattern could I take them to just any tire shop and expect them to know what to do? I have OEM wheels from my last vehicle that I want to put on my new one but I have no idea how.
My car has 4 bolts can I install a 8 hole rim?? Leaving some of the rim holes empty
Ok.
Is he arguing with someone in the room?
Is there a 5 lug to 4 lug adapter?
there maybe, best to do your research online, thanks!
@@HILLYARDSRIMLIONS hey bud where can I order them allen screws I need some for my adaptors
Does anyone make a 8 lug to give lug
Can I get an adapter to change from 5.98 over to 5.114.3 how much?
Can I get an answer
Hi Margaret, yes you should. I just got some, to put GM rims onto Ford hubs. You just have to specify, what you're putting on what. So they know, which size goes in and what bolt pattern sticks out! Hope this helps!?
It’s a wheel spacer/adapter
Wanna change my bmw 5x120 to volvo 5x108
Help?
Im trying to change my bmw 5×120 to a 5×114 lol
Any luck?
Would have gotten a like and subscribe from me if you would have separated that adapter.
Frank, David ?
Too 5 lug adapters
Not 55 it’s posta b 80 my g
Don’t assume we aren’t following, ok guy. That’s just simple math.
Why do you keep showing that flimsy spacer like that is the only kind OG wheel spacer there , that shows me your not very honest, there is a lot of information you left out and I am very interested in your product but I see you’d tell me anything to sell it then accept no blame when things go bad ,
Looks like he went out of business
you made a 1.5 minute explanation 4 minutes long.. Cheers
Stop being lazy get a damn tripod
Should've been a 60 second video but instead was nearly 4 condescending minutes included but not limited to referring to your customers as "lazy" because you want more FB Likes. LOL, ya, you'll go far in business.. (sarcasm) unless you learn from the message I'm trying to politely relay, then maybe you will change your approach going forward. Or not if instead of thanking me for professional business advice you become offended and defensive? Only time will tell.
horrible explanation. just get to the point