New Brass Prep for 6.5 PRC using Lapua Brass
Вставка
- Опубліковано 13 лип 2024
- This is a run down on my prep process for new brass. The purpose of this brass prep is just to get the brass ready for fire forming. I will not be making loads intended for any type of accuracy with the first shot fired. That will come after the brass is fired formed.
0:00 Intro
3:42 Expanding Case Necks
7:04 Trimming to Length
10:25 Deburring Case Mouths
11:05 Turning Case Necks
21:00 Uniforming Primer Pockets
22:15 Deburring Flash Holes
23:10 First Cleaning of Brass
25:18 Using Bushing Sizing Die and How to Calculate Bushing Size
31:22 Final Cleaning
Products used and where you can find them online:
-Hornady Custom Grade Sizing Die www.midwayusa.com/product/101...
-L.E. Wilson Case Trimmer lewilson.com/stainless-case-t...
-L.E. Wilson Case Holder lewilson.com/rifle-case-holders
-Hornady Lock n Load Neck Turning Tool www.midwayusa.com/product/101...
-Hornady One Shot Case Lube www.midwayusa.com/product/101...
-Lapua Brass 6.5 PRC www.midwayusa.com/product/102...
-RCBS Dial Caliper www.rcbs.com/case-processing/...
-Hornady Ball Micrometer www.midwayusa.com/product/102...
-Hornady Comparator www.midwayusa.com/product/101...
-RCBS Rock Chucker Supreme www.rcbs.com/presses/single-s...
-General Digital Caliper www.acehardware.com/departmen...
-RCBS Vibratory Case Tumbler www.rcbs.com/case-processing/...
-Hornady CornCob Tumbling Media www.cabelas.com/shop/en/horna...
-RCBS Case Separator www.rcbs.com/case-processing/...
-Hornady Match Grade Bushing Sizing Die www.midwayusa.com/product/101...
-Hornady Match Grade Bushing .289 www.midwayusa.com/product/101...
-Hornady Lock n Load Sonic Cleaner 2L www.midwayusa.com/product/101...
-Hornady One Shot Sonic Clean Solution www.midwayusa.com/product/116... - Розваги
I've watched a ton of videos on new brass prep and none if them can compare to yours. you did a great job. you explained everything very well. thanks
I hope it gives you some insight. If there is anything that you want to know, feel free to ask.
Thanks for watching!
your welcome
I am amazed that you do all of that to Lapua Brass. There are competition long range shooters that buy this brass because they say that the brass is so good, they don't have to do all the processing. I have done all you are doing and even weighed and sorted cases but only on less expensive brass that is not as uniform. More power to you, but when I pay for premium brass that is supposed to be good to go, I will not be doing all the case prep I do on cheaper brass. Nice video, always good to see what others do when they are reloading. We all have our own idea of what we need to do or not.
I do it to make sure that everything is as consistent as possible. I know that it may be a bit overkill, but it gets me results that I am more than happy with.
Thanks for watching!
Great video....have you remeasured case length again as a last in process as seen another video where the brass "grows" after each stage of the prep stage ...was interesting
Thanks for watching!
Thanks Matt but didn’t answer lol
@@ianschultz9383 my apologies. I misread you post. I have done that. For "new brass prep" I am not concerned. I always fire form the brass before doing set loads.
Do you notice velocities increase slightly with fire formed brass?
To be honest, I have not really tested that out. It is just something that I have always done for the sake of being consistent. And usually I have always fired new brass when breaking in the barrel of a new rifle. The 6.5 Creedmoor that I have has the most firings on one barrel and I have not yet worn out the brass.
What number headspace comparator insert you using? 420?
I do not use an actual head space comparator. I just use a bullet comparator. LOL
I keep spending my money on other stuff.
For hornady yes it’s E420
Waste of time and effort.
Go look at Eric Cortina. World champ!!!
Do what works for you.
Thanks for watching!
Your videos would be much more enjoyable if you ... did. not. make. a. point. of. clearly. enunciating. every. single. syllable. of. every. single. word. Just talk like a normal human being!
Thanks for watching!
What planet do you come from? He's speaking well. You made a foolish comment.
@@garrytalley8009 Thanks for watching!