When I purchase engines from anyone in the private sector, I use a cheap bore scope that hooks to my phone. It will tell you if a engine has flat tops, you can easily look at the valve train, you can check to see the bottom end, or see if a engine has four bolt mains (if that's the claim). It's quick and easy, and if the seller doesn't want to let you investigate well that tells the whole story anyway. Another great video Nick thanks.
From the moment nick said flat tapped cam, that's a big problem out the gate, plus rust that's literally blocking air too go into the rectangular ports, another problem,then them pistons 😳,if you planning on drag racing with that current set up your losing every last race ,period‼ even against some one on a skateboard
Whoever built that motor just threw it together for a quick flip.Knowing they would have no trouble selling a BBC if it looked the part.They never expected anyone to put it on a dyno before they installed it.
@@terryschnereger8531 I would be going back to who I got that motor from and giving them two options either 1) giving me all my money back and they keep the motor . Or 2) give me back at least half if not more of the money I paid and I keep the motor. Then you tell everyone you know not to do business with them. I'm a Mopar guy but this is the kind of stuff we all need to watch each others back and expose the scumbags who try to screw us over. No matter what you drive.
@@whitelightining7125 agreed. Nick should tear it down and do a full race rebuild if the owner expects to get 600 HP out of the big block. Those heads are excellent,but who installed the pistons 180• wrong ? Needs a better cam,too.
THANK YOU NICK, I HAVE LEARNED SO MUCH FROM YOU, YOU WILL NEVER KNOW, I WAS TAUGHT BY MY FATHER, KNOW I KNOW HE DID A MICKEY MOUSE REPAIR, BUT WATCHING YOU, HAS BEEN A LEARNING EXPERIENCE, AGAIN, "THANK YOU".
Gear drives on a bbc is a no no. There only good to 6000rpm, a double roller chain or belt drive is much better ! Check the cam also , some people have no clue about engines or BBC. A 427 L-88 revved easily to 7200 and had 7/16 pushrods not 3/8. And GM bbc square port heads can build 600 hp very easy. A Edelbrock dual plane rpm intake works well. 850 cfm holley is also a good choice. Try using a first design L-88 solid lifter cam. Get compression up to atleast 11.0 valve springs need updated also.most of this and good machine work should wake the dead out of it, but you are the man Nick. Love your channel Nick
I did a 454 for a farmer's truck one time, it came in with a very slight rod ticking. So o tore it down resized the rods at machine shop. When installing them one piston was on rod backwards. Had to take it back to be pressed off and turned around. If I wouldn't have caught it . It probably wouldn't make 100 miles without ruining crank and who knows what else. You have to stay focused. Not everyone can throw it together. Good job Nick.
There is always a reason an engine is sitting. If it was healthy and made big power it would be in a car. People don't let too many high-performance engines sit around guys. Great video Nick!
I disagree. Most budget builders will do their builds in stages. They either build the engine first or build the car. Life happens, things change, health fails. This is even more so for people on a strict budget. That window gets bigger because vudgets are smaller and is more prone to life disruptions. Mistakes are made from ignorance and not doing homework and desperation to complete the job. A flipper sellsa fresh engine with cheap parts. Not an engine just sitting for awhile.
These insights into your shop are a valuable source of knowledge as well as great entertainment for us Tubers. Thank you for being so free with your experience and showing how working life can be a gas with the right attitude. Like others say, take care of yourselves and work safely. You would be missed by many if you were injured. Good to see Vacily wearing gloves when handing oily parts.
It's like my electronics instructor told us at the beginning. "You will spend more time fixing what others have messed up than fixing the original problem". After 40 years in automotive maintenance he was proven right over and over. A little knowledge is a dangerous thing.
Can't stand when someone monkeyed with float level because it's not running right , and you end up finding the real problem , and then have to fix the float level. Keep the paws off the float level!
iguess they figured it was half way there, lol. well some smaller chambers or reverse dome pistons would do the trick along with a bigger cam and 175 to 190 ish psi. oh and port matching and head work. etc. etc. the list goes on and on don't it.
@Jason Davis As a young man I had a friend who was a retired Air Force engineer who was in on the testing of F-4 phantom engines for the Black bird project,he said the standard phantom engine produced 30,000 horse power with different fuel they could achieve 175,000 hp. Now the fuel he told me was good for extremely high altitude flight,the three key components: first was a thing I think he was mumbling to protect secrecy it sounded stupid furfall alcohol,second hydrazine, third aniline oil to control burn-rate,he was retired and had 2 hobbies fishing and flying his P-51 Mustang,he was a great man loved to listen to his stories.
Glad to hear you didn't get hurt too bad Nick - everyone would really miss your videos. Good thing us old time hot rod guys are tough! Keep the faith and keep building good lumps!!!
A 427 chev. My dad had a 65 Strata Chief. That was the name I recall. 4 sp. Some fella bought it new and drag-raced at a local track in New Brunswick. Dad redid the engine and a decal remove. When done, it never looked like the tiger it was. The 3 pedals and the Hurst button for the brakes was the only give-away. Cheers! and Thank You.
I guess this shows that it’s really hard to not make some power with a BBC. Low compression, tiny cam, big rectangle port open chamber heads, and a single plane and it still made 366hp. It literally had everything working against it. A set of closed chamber oval ports and dual plane and it’d be a nice torquey motor. Dome pistons and a bigger cam and it’d be a fire breather. Either way and perform way better than when it arrived.
V is for valiant, the way you approach life! A is for accountable, someone to be counted on S is for serene, your calm time. I is for inventor, how many things will you create? L is for little, the little things you do. L is for laughter, you spread wherever you go. E is for enthusiasm, in even the most dire circumstances
I love watching videos like these. They're mesmerizing because I don't understand one thing Nick is trying to explain but just the same, "oddly satisfying".
You guys are a joy to watch. To the point and simple language. A lot of these videos are more talk than do. Glad I found you guys. Keep up the great show.....
And they were all "Corvette LT1's" with a rock-crusher M22 🙄 glad the LS has taken over. It's crazy what power guys are making on junkyard 4.8s with a turbo lol
This is how it is in Germany. Dude drives a pos 1980 Parisienne Wagon with high jackers and a 350HP 350 - I mean, it has a Holley carb and cherry bombs! smh
Couple decades ago, I bought a Mopar 383 engine that had been bored .040 and stroked with a 440 crank that had its mains turned down to 383 size. Made it 434 cubic inches. Complete engine, supposedly ready to go. I put it in my car and fired it up. Ran OK at first. Added coolant to the radiator, then had to again, and had to again, then the engine seized. Suspicious of having to add so much coolant, I pulled the oil pan drain plug. Bunch of coolant ran out. OK, pulled the motor, took it completely apart. Found out that the 440 crank's counterweights (bigger than 383 counterweights) had hit the block and the builder (who shall remain nameless) had ground the block for clearance and gone into the water jacket, then tried to plug the leak. Obviously he didn't pressure check the attempted repair. Fortunately the seller (he wasn't the engine builder) agreed to pay for the machine work on an extra 383 block and 440 crank I had in my parts stash (the proper way to make it fit was to cut the 440 counterweights to 383 size). Then I assembled the motor myself. Still running today after almost 20 years.
So good to see that you're training the next generation of classic muscle car mechanics like Vassily. I'd also love an update on Vassily's girlfriend's race car performances.
I'm from a little town in United States called Taft, California. I love watching your videos. Please keep your videos coming and I will continue to watch them. Have a nice day. Nick
Those heads are made for a radical cam, high lift rockers and 12 to 1 compression with a short block capable of turning at least 7500 rpm. This is not for a stock BB short block with those tight main bearing clearances. Cheapest is to put some good cleaned up stock oval port heads with a good valve job, a good aftermarket chain and sprocket and a more realistic manifold that will give more low lift flow.
At least it was actually rebuilt... could have been an old motorhome engine with 100K on it and the only thing keeping the rods from knocking is the 10 pounds of sludge in the crankcase.
That was my thought too. A set of dome pistons should bring that engine to life. Annoying to have to tear down the engine again but not a huge deal with it being out of the car when bought.
@TheMEXICANBEEF Avoid the hassle set the timing 42 btdc buy some MOROSO octane booster if you can still find it if not go to your chemical supply house and get some aniline oil just don't get it on you,you'll get dizzy fall down and die of respiratory arrest,mix that one quart to 10 gallons of 93 octane,hell throw a gallon of toluene with that too,you may even want to try different mixes with e-85 get that virtual compression ratio up and then you'll have a rompin stompin wamma jamma untill it goes bye bye,poof!
We used to have a standard rotating engine and a counter rotating engine in boats. The screws have to turn outboard of each other or the boat will run terrible. Chrysler got out of Marine. GM and Ford stopped building counter turning engines. Marine gear builders picked up the counter turning screw in the gear. Chris Craft used gear to gear with their counter turning chevys. The lobes on the cam were ground to provide 12756348 firing order. The pistons in small blocks were put on the rods backwards to compensate for the outboard piston skirt beating on the walls. Big blocks could not do that because the valves hit the pistons. Closed chamber heads were used. Breathing is not the thing in Marine. Long stroke low rpm is. Other differences included reverse ribbing on front and rear main seals. Standard ribbing on a reverse engine will suck the oil right out. Chrysler used slashes on the rear seal surface for the cranks. That had to be machines backwards too. Starter drives engaged backwards. Their drive teeth were machined backwards. Fields wound to spin backwards. I was there, that’s how it was, that’s what I got to say about that.
If you want to know the truth bring it to Nick's garage. If you want it to run right and make the right horsepower bring it to Nick He's the man. when it comes old school Great job, Nick, and that's a beautiful Road Runner. I can't. Going down the road. Be safe.
Back in the day I've turned some 4 valve relief 302 pistons backwards. Since most don't know if it has an offset wristpin instead of centered it will pull the piston further and hang at tdc longer. Worked flawlessly for years! This was not the case for this 454!!!! The 302 had 200lbs compression and made around 400hp with junky iron heads lol!!!!
That’s a darn shame about that Big Block Chevy 427, but that just goes to show you some guys are not the mechanic that they think they are! Geez! It’s a good thing that customer brought it to you Nick, I know you’ll get that big Chevy lined out and doing what it’s suppose too! 👍👍
Take the little stainless rectangular cap off the door and or trunk lock and you will see the spring loaded brass pins that are different lengths. These are what the key pushes up to make the lock able to turn. I had extra Mopar locks from junkers and swapped around the pins so I had a one key Fury.
Not too worry. Here at Nick's Garage /GYM. He will get this BBENGINE pumping out the horse power.again. Good luck thanks for the videos. Watching from Wyoming.
Back when I was in the Air force I ran into a similar deal. A man had a 396 SS chevelle. He rebuild it and it would not turn completely over. He thought about towing it and decided to ask my opinion. Well I went to his home and we removed the heads. The pistons were 12.5 to 1 and were installed wrong and we also found a rag left in under the intake. He reinstalled the pistons correctly and removed the rag put it all back together and it run fine. No one is perfect and hast makes waste. When the work is hard and the wages are low take you time and go quite slow. Lol.
While it was a 454. It still had the factory heads with hand port job. Motor was rebuilt by DRE with his custom hydraulic roller, flat top piston with 10.1 cp and made 606hp on pumped gas with no timing really in it. Soft tune. You can make power when it's built correctly. This video shows what happens when people don't have a clue. I mean really. The pistons installed upside down is just ridiculous.
What amazed me was, hearing that seeing the pistons were installed 180* off! It’s a wonder the valves made it through the combustion process without major damage! WOW 😳
If I remember correctly the base 427 in 1967 was 390 hp. This was a mild street able engine used in Impalas, Corvettes etc. it used hi test leaded gas. Using the flat top Pistons would allow today's regular pump gas. I think the geared cam may also be ground to turn the other way unless it has idlers like the old Jackson setup. This engine is a mess of incompatible parts.
Looks like that big block Chevrolet needs a PROPER fresh rebuild by Nick and crew from the bottom up. I know you guys can make that engine really sing if the customer asks you to do it. I think 550 horse is a more realistic goal for horsepower on just pump gas, but I’m not an expert. Take care of that bruise above your eye Nick, a couple extra breaks with a nice Chocolate drink should do the trick! Thanks for another great video! Love that beautiful orange Road Runner!
Used engines are like a box of chocolates, you just don't know what your're going to get. Great episode and take care. Didn't forget the cannoli and espresso.
Just found this channel! So glad I did, this is excellent content that is much appreciated! I will like every video I see without a doubt. Great tear down and keep the details and length it is thorough and awesome 👌
A friend of mine had a BB Chevy custom built for his street racer '70 Camaro. Took the engine straight to a dyno man like Nick's customer did and it too didn't make horsepower. Turns out the engine builder was doing two BBs at the same time. The other one was for a truck to haul the customer's boat requiring a completely different engine. In the build process some parts got mixed and neither guy got what he wanted. The builder made things right on his dime so everything turned out OK in the end. As President Reagan used to say, "Trust but verify."
This is where you can buy the best parts but if they do not work together is will not make hp. Had small block chevy had all the goodies, but the heads flowed not so much , put a set that did made 150 hp more, changed the carb to one set up for the heads and cam made 200 overall. That is why you start with a cam and build to that. Thanks for the video Nick it shows what you see maybe not what your going to get.
Heh heh, engines like this 454 crack me up! I had a customer back in the mid-80's that bought a pretty nice looking '66 Fairlane with a supposedly 'built' 302. Poor guy couldn't seem to get it past 4200 without breaking up, and after changing out the coil, spark plugs, new carburetor, etc., he finally brought it to me to see what was going on. It sounded great at idle. Nice lumpy cam, roller rockers hiding under pretty chrome valve covers... *on top of stock worn out Ford valve springs and retainers!* It had *maybe* 100 lbs. of compression across the board, and I notified the owner, and he said to pull the engine and see how bad off the rest was. The cam and lifters were probably the best part of the whole engine, along with an antiquated Mallory dual-point distributor, and an almost brand-new set of Hedman Headers. The rest of the engine was essentially bone stock, with typical small port 302 heads, and stock pistons. We ended up using it for a core and got a 347c.i. long-block (stroker crate motor), equipped it with late model ECC IV electronic ignition and a high output coil, and turned that sickly Fairlane into a 370 hp. tire melter that still got fairly decent gas mileage. Not too bad for around $2500 back in the day.😉
Its details like the same coded cylinders that people either overlook, or dont care. On some cars ive had, or other people, they got a wad of keys because the ign., trunk, and doors all have seperate keys.
Always fascinating to see a master of his craft at work. The Experience really shows. To often today people never seek to achieve that level of Awesome.
I used to make a killing fixing screw ups like this. Many people don't have an understanding of how the parts must work together and compliment each other. The usual thing was a huge Holley with a adapter on a stock manifold...or the big honking cam with 8.1 compression and 2.73 gears...the single plane intake and stock exhaust system..
I pat myself on the back with this one. When you made that dyno pull, knowing it had those big M, big port heads, I knew it had flat tops in it. Upside down none the less lol! I'm a Chevy man through and through and had a few Big Blocks and many, high revving small blocks.. Gear Drive = Valve Train Vibrator.
I Love how you say fix it right. I Repair tachographs.....and i always have to repair other people's fixes before i can actually repair the original faults that caused the instrument to fail .
its been a while, but i built a few of these that made 600hp and change with the small 2.19/1.78 valves and a solid flat tappet., we did have some good compression numbers from those 12.5 pistons right out of GMs racing bible of 1980 !!
One of the biggest electrical issues with classic Mopars is the ignition power wires, to and from the switch, are very long. The wires increases in resistance over time , the connections get old and develop resistance and the contacts in the switch wear and increase in resistance. This can cause a drop in voltage to the ignition system and throughout the ignition system.
I love 1970 RR>X they are the most beautiful cars Plymouth ever made. The trunk wing is a distraction to the beauty of the Hemi Bird. My friend has a 2001 Prowler with a 2005 LS3 it is the sleeper from Hell. Beautiful also.
Very informative and exciting for me to watch, there are so many car guys out there that think they know what they're doing, till something goes wrong, Love these videos, Thanks Nick :-)
I don't guess when it comes to horse power , I ran my 68 super bee with a 440 on a chassis dyno back in 69 with cam headers holly 780 I got 325 hp at the rear wheels never guess that's what Dyno's are for !! Good Job Nick !! another 5 star video
Besides the fact that the pistons were installed wrong, did you check deck height? Luckily the cam is small and the intake valve apparently didn't hit the piston. Clearly the engine needs to come apart, check everything, and make some changes if the customer wants to make some power. Good thing it got checked before putting it in the car.
I bought a 402 big block once,for a 71 SS El Camino I had,tore it down & found different pistons in it some were used & bout two were replaced, priced a new set & was like shocked at the price,like $500.00 just for pistons,so I put it back together & sold it,used the money to rebuild a small block 350 I had.wish I had kept a 454 I had purchased for a Chevy luv,that ran pretty good, it was just stock but ran ok.just things you run into in life, while your into projects, it’s hard to invest money into projects when your married have kids,bills, & a never ending list of honey doos!!! Not to mention limited time. Then turn wrenches for a living.but it’s always interesting to watch Nicks shows, no b/s & real muscle cars,
I'm no expert, but was a machinist in an engine shop for 5 years and saw the big claim engines almost weekly get opened up to reveal improper assembly that even a novice should have picked up. My favorite is the "red rag" clump of fibers all stuck on the oil pick up.
One place I worked the boss had a TOP NOTCH ENGINE BUILDER assemble his marine 454 Chevy's. The top notch tech the boss's friend was putting the rod caps on backwards.
Hello, I am currently restoring/customizing a 1983 Dodge van with a super 6 and an A-833 trans. You talked about re coding the door locks to match the ignition key. Would it be possible to show how that’s done? Love the channel!
Oh well. I had a man who bought an engine. He got a good deal on it. Triple springs and roller cam , pop up pistons with openchamber rectangular port heads, dual plane manifold . Poor combinations of parts can make a mess of things. Just put a Big shot of Nitrous on it and watch it take off.
Hey Nick put a blower on top of that motor and make WAY over 600 HP. At 120 per cylinder thats right at somewhere around 8.5 to one. Ideal compression ratio for a blower putting out sub 25 psi on street premium gas. My last performance motor was a 355 SBC with a 144 B&M blower that made close to 450 without the NOS that boosted it to over 600HP. That was out of a 355 SBC. A 434 big block with a 6/71 or paxton setup should be close to 800 if not more without NOS. That is if the pistons are good forged ones, rods are good aftermarket, 4 bolt main block and a steel crank. Otherwise you are making a BIG grenade. Would make for a great UA-cam video of dyno disaster segment however if cheap parts are used.
Montreal is a long way away (maybe 1000 miles?) but I'd gladly bring a car to you to be built and or restored because you're trustworthy & know what you're doing. Much love from Ohio !!!! And yes please be careful !!!
used to be a mod to stop power valve issues. you gave a passage seat a mark with a phillips screwdriver to put a cross mark in it, then you put a small bearing in over it. apparently if a back fire happens, the ball gets pushed into the seat, but the X mark you made keeps it from sticking in place?
Good thing that was a small cam with the intake reliefs on the wrong side of the cylinder. Bad juju when pistons kiss valves. Hopefully the 427 owner wants to pony up and have Nick build that 427 right. Be awesome to put those heads to work!
Watched one of his episodes in the past and was cool...didn't relize he had engine episodes like this...I love thos kinda real life stuff ..subscribed !!
Wow, the things you find when you dig in an engine, 105 and 115 Cyl. compression, seen old lawnmowers do better than that,lol. Watch the overhead objects Nick, you don't need anymore knocks on the noggin' ;) Hope all is well in the shop on this fine day.
Hey, at least they used parts that fit, albeit a piss poor combo. I got a good story! My first car was a 1970 Chevelle Malibu coupe that I bought when I was 16. Originally a 307 car, and was told that it was the original engine, but slightly hopped up (classic intake, carb, cam, and dressup build). My intention was to build it into an SS clone so engine didn’t concern me much, but being a tinkerer I pulled it apart anyway. It was burning coolant so I knew it had problems. What I didn’t expect was the Frankenstein small block chevy I found. After taking it apart and checking casting numbers, I found out it wasn’t actually a 307. Someone had dug up a 267 block from an old 80s chevy, complete with stock bore and rotating assembly. They swapped the heads for a set of 1971 casting 400 heads (Hence why it was burning coolant, since the difference in bore from a 267 and a 400 is half an inch, meaning the combustion chamber was bigger than the cylinder, overlapping onto the deck, burning up the head gaskets). From there they added a small no-name solid flat tappet cam, an edlebrock duel plane intake, and a Rochester 750 4 barrel. Add some Mickey Thompson quick release valve covers, a chrome air filter, and a hei distributor and you have the build. I got a good laugh out of it, tossed out everything but the intake and valve covers, and ended up building a 396 (bored to 402) for my car with the help of a professional engine builder. Ended up making 380 hp and 410 lb ft out of it with stock crank and rods, stock iron oval port open chamber heads and a whopping 9.2:1 compression ratio so I could burn regular gas, And have lots of room for power with a little boost or a simple head swap. I’m quite proud of the combo, it’s perfect for a car show cruiser, good on gas when you pull out of the throttle, but still a lot of fun when you ask for more 😁
Was just noticing that! The focus is incredible, if you look close he doesn't even blink while watching the run up! Those eyes have seen everything lol
Hey Nick want to save a lot of time? Invest on a Probe Camera! With a probe you guys could have inspected the Cylinder walls and Piston Heads without taking out the Engine Head via the Spark Plug holes. There are many cheap ones but you might want to get one with high quality image to be able to see details like Cylinder Wall scratches, Cracks, Grooves and Rust.
I had a duster , and the start key did not work in the door , door key was the same as the truck key . The car was bought off the showroom floor brand new .
@@nickpanaritis4122 i also had a valient bought brand new , 273 v-8 ( I think the slant six in the duster was faster ) and it was the same way starter key was the big key , the doors and trunk were the small key , worked good if you want to warm the motor up on a cold day , you could lock the doors and still have the engine running , wasn't a problem , it's the way the cars came in . Both were bought off the showroom floor
When I purchase engines from anyone in the private sector, I use a cheap bore scope that hooks to my phone. It will tell you if a engine has flat tops, you can easily look at the valve train, you can check to see the bottom end, or see if a engine has four bolt mains (if that's the claim). It's quick and easy, and if the seller doesn't want to let you investigate well that tells the whole story anyway. Another great video Nick thanks.
You can get one for under $20 and I agree with you 100%.
@@michaelwilkening8542 👍
What motor are you using?',; calling yoself the LS killer???????
What motor is you using calling yoself a LS killer',?; lol another GM Hater man smh The kings of HP still running things lol
From the moment nick said flat tapped cam, that's a big problem out the gate, plus rust that's literally blocking air too go into the rectangular ports, another problem,then them pistons 😳,if you planning on drag racing with that current set up your losing every last race ,period‼ even against some one on a skateboard
I love seeing badly built engines tested, taken apart and the mistakes explained. There's always that factor of surprise.
Feel badly for the customer though...
I call that educational process when they don’t pay attention to the how to build engines in the manual
me to
Whoever built that motor just threw it together for a quick flip.Knowing they would have no trouble selling a BBC if it looked the part.They never expected anyone to put it on a dyno before they installed it.
yup.
We need to call these guys out!!
@@terryschnereger8531 I would be going back to who I got that motor from and giving them two options either 1) giving me all my money back and they keep the motor . Or 2) give me back at least half if not more of the money I paid and I keep the motor. Then you tell everyone you know not to do business with them.
I'm a Mopar guy but this is the kind of stuff we all need to watch each others back and expose the scumbags who try to screw us over. No matter what you drive.
@@whitelightining7125 agreed. Nick should tear it down and do a full race rebuild if the owner expects to get 600 HP out of the big block. Those heads are excellent,but who installed the pistons 180• wrong ? Needs a better cam,too.
You’d be crazy not to, paying big block dollars for an engine that’s claimed to be 600 hp,forget it.too many shysters out there
THANK YOU NICK, I HAVE LEARNED SO MUCH FROM YOU, YOU WILL NEVER KNOW, I WAS TAUGHT BY MY FATHER, KNOW I KNOW HE DID A MICKEY MOUSE REPAIR, BUT WATCHING YOU, HAS BEEN A LEARNING EXPERIENCE, AGAIN, "THANK YOU".
Gear drives on a bbc is a no no. There only good to 6000rpm, a double roller chain or belt drive is much better !
Check the cam also , some people have no clue about engines or BBC.
A 427 L-88 revved easily to 7200 and had 7/16 pushrods not 3/8. And GM bbc square port heads can build 600 hp very easy. A Edelbrock dual plane rpm intake works well. 850 cfm holley is also a good choice. Try using a first design L-88 solid lifter cam. Get compression up to atleast 11.0 valve springs need updated also.most of this and good machine work should wake the dead out of it, but you are the man Nick.
Love your channel Nick
I did a 454 for a farmer's truck one time, it came in with a very slight rod ticking. So o tore it down resized the rods at machine shop. When installing them one piston was on rod backwards. Had to take it back to be pressed off and turned around. If I wouldn't have caught it . It probably wouldn't make 100 miles without ruining crank and who knows what else. You have to stay focused. Not everyone can throw it together. Good job Nick.
It is a 600hp* BBC. The seller just forgot to tell the buyer that it requires a 300 shot of NOS ( not included )
😂😂😂😂
"600 hp capable..."
There is always a reason an engine is sitting. If it was healthy and made big power it would be in a car. People don't let too many high-performance engines sit around guys. Great video Nick!
I disagree. Most budget builders will do their builds in stages. They either build the engine first or build the car. Life happens, things change, health fails. This is even more so for people on a strict budget. That window gets bigger because vudgets are smaller and is more prone to life disruptions. Mistakes are made from ignorance and not doing homework and desperation to complete the job. A flipper sellsa fresh engine with cheap parts. Not an engine just sitting for awhile.
That's not always the case I have a new Ls 7 454 still in crate that I bought in the 70s to install in my Ls 5 corvette still have both 55k on vette
@@caclark7600 Damn you don't go to the garage and just day dream about what that thing sounds like?
I became a mechanic in 1998. This man is living my dream.
Thanks Nick and of course George the Super Camera Guy...WOW how good is he..... For the...update video...!
These insights into your shop are a valuable source of knowledge as well as great entertainment for us Tubers. Thank you for being so free with your experience and showing how working life can be a gas with the right attitude. Like others say, take care of yourselves and work safely. You would be missed by many if you were injured. Good to see Vacily wearing gloves when handing oily parts.
Love it..You are a model for all shops...No B.S. Down to earth facts....No large Ego that I can see! just know your business! Wish you were closer!
It's like my electronics instructor told us at the beginning. "You will spend more time fixing what others have messed up than fixing the original problem". After 40 years in automotive maintenance he was proven right over and over. A little knowledge is a dangerous thing.
Can't stand when someone monkeyed with float level because it's not running right , and you end up finding the real problem , and then have to fix the float level.
Keep the paws off the float level!
Right. He come fix this job some fawked. Up. Ok. That gonna cost you double. I have to undo someone else fawk up and do over again.
Nick is a great example of a guy who loves what he does so work is enjoyable. Thank you sir for the great content.
ahh I love "those engine builders", the ones that calculate hp based on adding up the box tops...
iguess they figured it was half way there, lol. well some smaller chambers or reverse dome pistons would do the trick along with a bigger cam and 175 to 190 ish psi. oh and port matching and head work. etc. etc. the list goes on and on don't it.
That's why I put stickers on my cars ... +5 hp per sticker.
@Jason Davis why?
@Jason Davis As a young man I had a friend who was a retired Air Force engineer who was in on the testing of F-4 phantom engines for the Black bird project,he said the standard phantom engine produced 30,000 horse power with different fuel they could achieve 175,000 hp. Now the fuel he told me was good for extremely high altitude flight,the three key components: first was a thing I think he was mumbling to protect secrecy it sounded stupid furfall alcohol,second hydrazine, third aniline oil to control burn-rate,he was retired and had 2 hobbies fishing and flying his P-51 Mustang,he was a great man loved to listen to his stories.
One thing I left out the whatever alcohol and hydrazine would detonate when in contact with each other so the need for the aniline oil.
Nick's garage.........episode uploaded Monday has 109,880 views, great job to Nick and George. .....CONGRATS
Glad to hear you didn't get hurt too bad Nick - everyone would really miss your videos. Good thing us old time hot rod guys are tough! Keep the faith and keep building good lumps!!!
A 427 chev. My dad had a 65 Strata Chief. That was the name I recall. 4 sp. Some fella bought it new and drag-raced at a local track in New Brunswick. Dad redid the engine and a decal remove. When done, it never looked like the tiger it was. The 3 pedals and the Hurst button for the brakes was the only give-away. Cheers! and Thank You.
I guess this shows that it’s really hard to not make some power with a BBC. Low compression, tiny cam, big rectangle port open chamber heads, and a single plane and it still made 366hp. It literally had everything working against it.
A set of closed chamber oval ports and dual plane and it’d be a nice torquey motor. Dome pistons and a bigger cam and it’d be a fire breather. Either way and perform way better than when it arrived.
V is for valiant, the way you approach life!
A is for accountable, someone to be counted on
S is for serene, your calm time.
I is for inventor, how many things will you create?
L is for little, the little things you do.
L is for laughter, you spread wherever you go.
E is for enthusiasm, in even the most dire circumstances
I love watching videos like these. They're mesmerizing because I don't understand one thing Nick is trying to explain but just the same, "oddly satisfying".
You guys are a joy to watch. To the point and simple language. A lot of these videos are more talk than do. Glad I found you guys. Keep up the great show.....
Mr. Thank you.
"Headers, High rise intake, 4 barrel Carb, a new mild cam, one see through distributor cap and new plugs..""
"6 new parts × 100hp = 600hp"" 👏😕😂
Anyone who knows anything knows the clear caps are junk....thats the sign of a noob
8.0:1 CR lol
Notime ForFakeNews don’t forget 4 bolts main you have to add it by that
@@ToxicMisfitsYt + 400 = 1000hp 😮 😄😂
@@andrewjenkins879. Probably not even 8:1. I was guessing low 7s compression.
What I like about Nick is that he works on everything. Ford, Chevy or Chrysler all cool muscle Cars.
Right on!
They got my sub!! Definitely seem like awesome people.
Reminiscent of the 1980s.Every 350 chevy made 400 horse even when it was a 305 from a 1978 Caprice.
And they were all "Corvette LT1's" with a rock-crusher M22 🙄 glad the LS has taken over. It's crazy what power guys are making on junkyard 4.8s with a turbo lol
The typical backyard Chevy boy from the 90s.
This is how it is in Germany. Dude drives a pos 1980 Parisienne Wagon with high jackers and a 350HP 350 - I mean, it has a Holley carb and cherry bombs! smh
Lmao
Was not 1 400 factory hp 350. in early 80s not 1
Couple decades ago, I bought a Mopar 383 engine that had been bored .040 and stroked with a 440 crank that had its mains turned down to 383 size. Made it 434 cubic inches. Complete engine, supposedly ready to go. I put it in my car and fired it up. Ran OK at first. Added coolant to the radiator, then had to again, and had to again, then the engine seized. Suspicious of having to add so much coolant, I pulled the oil pan drain plug. Bunch of coolant ran out. OK, pulled the motor, took it completely apart. Found out that the 440 crank's counterweights (bigger than 383 counterweights) had hit the block and the builder (who shall remain nameless) had ground the block for clearance and gone into the water jacket, then tried to plug the leak. Obviously he didn't pressure check the attempted repair. Fortunately the seller (he wasn't the engine builder) agreed to pay for the machine work on an extra 383 block and 440 crank I had in my parts stash (the proper way to make it fit was to cut the 440 counterweights to 383 size). Then I assembled the motor myself. Still running today after almost 20 years.
herman. That is the way to do it.
So good to see that you're training the next generation of classic muscle car mechanics like Vassily. I'd also love an update on Vassily's girlfriend's race car performances.
I'm from a little town in United States called Taft, California. I love watching your videos. Please keep your videos coming and I will continue to watch them. Have a nice day. Nick
I got plowed by CHP there. Plowed with a ticket for vroom vroom.
obviously he had the engine laying next to the car for so long, all the horses ran away
Runes. LOL.
Con job,the car community is ate up with it . Do your own work If you can
Good one!!!!
Lol
That happened to me once
Those heads are made for a radical cam, high lift rockers and 12 to 1 compression with a short block capable of turning at least 7500 rpm.
This is not for a stock BB short block with those tight main bearing clearances.
Cheapest is to put some good cleaned up stock oval port heads with a good valve job, a good aftermarket chain and sprocket and a more realistic manifold that will give more low lift flow.
love watching people who know what they are doing....
At least it was actually rebuilt... could have been an old motorhome engine with 100K on it and the only thing keeping the rods from knocking is the 10 pounds of sludge in the crankcase.
That was my thought too. A set of dome pistons should bring that engine to life. Annoying to have to tear down the engine again but not a huge deal with it being out of the car when bought.
@TheMEXICANBEEF Avoid the hassle set the timing 42 btdc buy some MOROSO octane booster if you can still find it if not go to your chemical supply house and get some aniline oil just don't get it on you,you'll get dizzy fall down and die of respiratory arrest,mix that one quart to 10 gallons of 93 octane,hell throw a gallon of toluene with that too,you may even want to try different mixes with e-85 get that virtual compression ratio up and then you'll have a rompin stompin wamma jamma untill it goes bye bye,poof!
At least it wasn't a krylon rebuild with it paint it ship it lol
I prefer the 454's out of motorhomes. I build them for demolition derbies. Even the hated peanut port heads work great for a torque build.
Thank you for addressing my question from your first live stream in this video. 70 roadrunner only runner up to my favorite the 71.
That 70 Road Runner brings back a lot of memories. I bought one when I returned from Southeast Asia in 1970.
That guy got ripped off! Man I like that roadrunner
We used to have a standard rotating engine and a counter rotating engine in boats. The screws have to turn outboard of each other or the boat will run terrible. Chrysler got out of Marine. GM and Ford stopped building counter turning engines. Marine gear builders picked up the counter turning screw in the gear. Chris Craft used gear to gear with their counter turning chevys.
The lobes on the cam were ground to provide 12756348 firing order. The pistons in small blocks were put on the rods backwards to compensate for the outboard piston skirt beating on the walls. Big blocks could not do that because the valves hit the pistons. Closed chamber heads were used. Breathing is not the thing in Marine. Long stroke low rpm is. Other differences included reverse ribbing on front and rear main seals. Standard ribbing on a reverse engine will suck the oil right out. Chrysler used slashes on the rear seal surface for the cranks. That had to be machines backwards too. Starter drives engaged backwards. Their drive teeth were machined backwards. Fields wound to spin backwards. I was there, that’s how it was, that’s what I got to say about that.
Mike. So one of two marine engines is all backwards. Interesting. Thanks for the info Mike.
If you want to know the truth bring it to Nick's garage. If you want it to run right and make the right horsepower bring it to Nick He's the man. when it comes old school Great job, Nick, and that's a beautiful Road Runner. I can't. Going down the road. Be safe.
Back in the day I've turned some 4 valve relief 302 pistons backwards. Since most don't know if it has an offset wristpin instead of centered it will pull the piston further and hang at tdc longer. Worked flawlessly for years! This was not the case for this 454!!!! The 302 had 200lbs compression and made around 400hp with junky iron heads lol!!!!
Dodge engines like the piston flip too
Being such a perfectionist Nick is why your cars come out so Brilliantly. You and your team turn out perfect product. Little Aussie Follower ....
Hi Nick and to all! 12.15 am here in Melbourne Australia and the coffee’s hot.....enjoying your channel!
Good morning! Thanks Mario.
Good morning sir. Hope you have a good day!
That’s a darn shame about that Big Block Chevy 427, but that just goes to show you some guys are not the mechanic that they think they are! Geez! It’s a good thing that customer brought it to you Nick, I know you’ll get that big Chevy lined out and doing what it’s suppose too! 👍👍
Take the little stainless rectangular cap off the door and or trunk lock and you will see the spring loaded brass pins that are different lengths. These are what the key pushes up to make the lock able to turn. I had extra Mopar locks from junkers and swapped around the pins so I had a one key Fury.
105 psi compression? I've had farts with more pressure than that
badcactus72 taco Bell helps get you to 120psi
@@spankthemonkey3437 lmao! I'll take that under advisement, but I'm scared to blow out an o-ring!
badcactus72 yea that rear main seal is important you don't want to slip and fall
I’ve had coffee give me a higher compression than that.
use a jalepeno spray injector to get to 170psi with them tacos
Your a good man nick
Great to listen to Nick, very knowledgable and fascinating to watch,. An education...
Not too worry. Here at Nick's Garage /GYM. He will get this BBENGINE pumping out the horse power.again.
Good luck thanks for the videos.
Watching from Wyoming.
Back when I was in the Air force I ran into a similar deal. A man had a 396 SS chevelle. He rebuild it and it would not turn completely over. He thought about towing it and decided to ask my opinion. Well I went to his home and we removed the heads. The pistons were 12.5 to 1 and were installed wrong and we also found a rag left in under the intake. He reinstalled the pistons correctly and removed the rag put it all back together and it run fine. No one is perfect and hast makes waste. When the work is hard and the wages are low take you time and go quite slow. Lol.
While it was a 454. It still had the factory heads with hand port job. Motor was rebuilt by DRE with his custom hydraulic roller, flat top piston with 10.1 cp and made 606hp on pumped gas with no timing really in it. Soft tune. You can make power when it's built correctly. This video shows what happens when people don't have a clue. I mean really. The pistons installed upside down is just ridiculous.
What amazed me was, hearing that seeing the pistons were installed 180* off! It’s a wonder the valves made it through the combustion process without major damage! WOW 😳
If I remember correctly the base 427 in 1967 was 390 hp. This was a mild street able engine used in Impalas, Corvettes etc. it used hi test leaded gas. Using the flat top Pistons would allow today's regular pump gas. I think the geared cam may also be ground to turn the other way unless it has idlers like the old Jackson setup. This engine is a mess of incompatible parts.
Looks like that big block Chevrolet needs a PROPER fresh rebuild by Nick and crew from the bottom up. I know you guys can make that engine really sing if the customer asks you to do it. I think 550 horse is a more realistic goal for horsepower on just pump gas, but I’m not an expert.
Take care of that bruise above your eye Nick, a couple extra breaks with a nice Chocolate drink should do the trick! Thanks for another great video! Love that beautiful orange Road Runner!
Used engines are like a box of chocolates, you just don't know what your're going to get. Great episode and take care. Didn't forget the cannoli and espresso.
And remember ... I don't want to see Pauley anymore either! 😉😀
One espresso and cannoli for me, please
@@wallacegrommet9343 No problem Sir! I will even throw in a Toscano cigar with a single malt. If you are ever in the Great White North!
I never fail to learn something important with every episode. Cheers, Nick!
Just found this channel! So glad I did, this is excellent content that is much appreciated! I will like every video I see without a doubt. Great tear down and keep the details and length it is thorough and awesome 👌
Working Class. Thanks for enjoying our channel.
It's nice to see people caring about what they do! I subscribed instantly. Keep up the good work. -Glen
A friend of mine had a BB Chevy custom built for his street racer '70 Camaro. Took the engine straight to a dyno man like Nick's customer did and it too didn't make horsepower. Turns out the engine builder was doing two BBs at the same time. The other one was for a truck to haul the customer's boat requiring a completely different engine. In the build process some parts got mixed and neither guy got what he wanted. The builder made things right on his dime so everything turned out OK in the end. As President Reagan used to say, "Trust but verify."
didnt happen...
This is where you can buy the best parts but if they do not work together is will not make hp. Had small block chevy had all the goodies, but the heads flowed not so much , put a set that did made 150 hp more, changed the carb to one set up for the heads and cam made 200 overall. That is why you start with a cam and build to that. Thanks for the video Nick it shows what you see maybe not what your going to get.
Heh heh, engines like this 454 crack me up! I had a customer back in the mid-80's that bought a pretty nice looking '66 Fairlane with a supposedly 'built' 302. Poor guy couldn't seem to get it past 4200 without breaking up, and after changing out the coil, spark plugs, new carburetor, etc., he finally brought it to me to see what was going on. It sounded great at idle. Nice lumpy cam, roller rockers hiding under pretty chrome valve covers... *on top of stock worn out Ford valve springs and retainers!* It had *maybe* 100 lbs. of compression across the board, and I notified the owner, and he said to pull the engine and see how bad off the rest was. The cam and lifters were probably the best part of the whole engine, along with an antiquated Mallory dual-point distributor, and an almost brand-new set of Hedman Headers. The rest of the engine was essentially bone stock, with typical small port 302 heads, and stock pistons. We ended up using it for a core and got a 347c.i. long-block (stroker crate motor), equipped it with late model ECC IV electronic ignition and a high output coil, and turned that sickly Fairlane into a 370 hp. tire melter that still got fairly decent gas mileage. Not too bad for around $2500 back in the day.😉
@Paradoxical Nightmare LOL, no doubt!😁
Its details like the same coded cylinders that people either overlook, or dont care. On some cars ive had, or other people, they got a wad of keys because the ign., trunk, and doors all have seperate keys.
Hope your eye heals quickly! Another great Monday Morning with Nick's garage.
Always fascinating to see a master of his craft at work. The Experience really shows.
To often today people never seek to achieve that level of Awesome.
Nick shall bring the power forth. Nick bumped his head and made the flux capacitor.
But not with those pistons, maybe not the cam either. I dunno, this engine build looks more like lipstick on a pig rather than a serious build.
I used to make a killing fixing screw ups like this. Many people don't have an understanding of how the parts must work together and compliment each other. The usual thing was a huge Holley with a adapter on a stock manifold...or the big honking cam with 8.1 compression and 2.73 gears...the single plane intake and stock exhaust system..
I pat myself on the back with this one. When you made that dyno pull, knowing it had those big M, big port heads, I knew it had flat tops in it. Upside down none the less lol! I'm a Chevy man through and through and had a few Big Blocks and many, high revving small blocks.. Gear Drive = Valve Train Vibrator.
I Love how you say fix it right. I Repair tachographs.....and i always have to repair other people's fixes before i can actually repair the original faults that caused the instrument to fail .
its been a while, but i built a few of these that made 600hp and change with the small 2.19/1.78 valves and a solid flat tappet., we did have some good compression numbers from those 12.5 pistons right out of GMs racing bible of 1980 !!
One of the biggest electrical issues with classic Mopars is the ignition power wires, to and from the switch, are very long. The wires increases in resistance over time , the connections get old and develop resistance and the contacts in the switch wear and increase in resistance. This can cause a drop in voltage to the ignition system and throughout the ignition system.
Thanks Jim. Sounds like you have spent some time in the wires.
You get that with old motorcycle to, see it a lot.
Nice work nick on that orange bird
I look forward to these videos every Monday morning. Thank-you very much guys!
I love 1970 RR>X they are the most beautiful cars Plymouth ever made. The trunk wing is a distraction to the beauty of the Hemi Bird. My friend has a 2001 Prowler with a 2005 LS3 it is the sleeper from Hell. Beautiful also.
Very informative and exciting for me to watch, there are so many car guys out there that think they know what they're doing, till something goes wrong, Love these videos, Thanks Nick :-)
I don't guess when it comes to horse power , I ran my 68 super bee with a 440 on a chassis dyno back in 69 with cam headers holly 780 I got 325 hp at the rear wheels never guess that's what Dyno's are for !! Good Job Nick !! another 5 star video
Woof woof
Thanks Nick! Good video on the Missing HP.
Besides the fact that the pistons were installed wrong, did you check deck height? Luckily the cam is small and the intake valve apparently didn't hit the piston. Clearly the engine needs to come apart, check everything, and make some changes if the customer wants to make some power. Good thing it got checked before putting it in the car.
I bought a 402 big block once,for a 71 SS El Camino I had,tore it down & found different pistons in it some were used & bout two were replaced, priced a new set & was like shocked at the price,like $500.00 just for pistons,so I put it back together & sold it,used the money to rebuild a small block 350 I had.wish I had kept a 454 I had purchased for a Chevy luv,that ran pretty good, it was just stock but ran ok.just things you run into in life, while your into projects, it’s hard to invest money into projects when your married have kids,bills, & a never ending list of honey doos!!! Not to mention limited time. Then turn wrenches for a living.but it’s always interesting to watch Nicks shows, no b/s & real muscle cars,
Nice pleasant car channel 👍
I'm no expert, but was a machinist in an engine shop for 5 years and saw the big claim engines almost weekly get opened up to reveal improper assembly that even a novice should have picked up. My favorite is the "red rag" clump of fibers all stuck on the oil pick up.
Tha car that cut Nick's eye AUTOMATICALLY gained 40hp!👍🙏
Thank you for making the keys right. It drives me nuts when the keys do not match like they should.
One place I worked the boss had a TOP NOTCH ENGINE BUILDER assemble his marine 454 Chevy's. The top notch tech the boss's friend was putting the rod caps on backwards.
Hello, I am currently restoring/customizing a 1983 Dodge van with a super 6 and an A-833 trans. You talked about re coding the door locks to match the ignition key. Would it be possible to show how that’s done? Love the channel!
AJ. Take your door locks and ignition key to a locksmith and have them coded to the ignition key. That is what I have done to the RR.
Thanks Nick 👍
Oh well. I had a man who bought an engine. He got a good deal on it. Triple springs and roller cam , pop up pistons with openchamber rectangular port heads, dual plane manifold . Poor combinations of parts can make a mess of things. Just put a Big shot of Nitrous on it and watch it take off.
Thanks nick, always nice to see your expertise in action. Amazing what thieves are out there. Keep up the good work!
Hey Nick put a blower on top of that motor and make WAY over 600 HP. At 120 per cylinder thats right at somewhere around 8.5 to one. Ideal compression ratio for a blower putting out sub 25 psi on street premium gas. My last performance motor was a 355 SBC with a 144 B&M blower that made close to 450 without the NOS that boosted it to over 600HP. That was out of a 355 SBC. A 434 big block with a 6/71 or paxton setup should be close to 800 if not more without NOS. That is if the pistons are good forged ones, rods are good aftermarket, 4 bolt main block and a steel crank. Otherwise you are making a BIG grenade. Would make for a great UA-cam video of dyno disaster segment however if cheap parts are used.
Montreal is a long way away (maybe 1000 miles?) but I'd gladly bring a car to you to be built and or restored because you're trustworthy & know what you're doing. Much love from Ohio !!!! And yes please be careful !!!
I’m seriously in lust with that Road Runner!❤️❤️❤️
used to be a mod to stop power valve issues. you gave a passage seat a mark with a phillips screwdriver to put a cross mark in it, then you put a small bearing in over it. apparently if a back fire happens, the ball gets pushed into the seat, but the X mark you made keeps it from sticking in place?
Good thing that was a small cam with the intake reliefs on the wrong side of the cylinder. Bad juju when pistons kiss valves.
Hopefully the 427 owner wants to pony up and have Nick build that 427 right. Be awesome to put those heads to work!
Watched one of his episodes in the past and was cool...didn't relize he had engine episodes like this...I love thos kinda real life stuff ..subscribed !!
Welcome!
“And see the truth”
Realty always bats last.
This is good stuff,thanks.
Thumbs up! A true professional.
Wow, the things you find when you dig in an engine, 105 and 115 Cyl. compression, seen old lawnmowers do better than that,lol. Watch the overhead objects Nick, you don't need anymore knocks on the noggin' ;) Hope all is well in the shop on this fine day.
Hey, at least they used parts that fit, albeit a piss poor combo. I got a good story!
My first car was a 1970 Chevelle Malibu coupe that I bought when I was 16. Originally a 307 car, and was told that it was the original engine, but slightly hopped up (classic intake, carb, cam, and dressup build). My intention was to build it into an SS clone so engine didn’t concern me much, but being a tinkerer I pulled it apart anyway. It was burning coolant so I knew it had problems. What I didn’t expect was the Frankenstein small block chevy I found.
After taking it apart and checking casting numbers, I found out it wasn’t actually a 307. Someone had dug up a 267 block from an old 80s chevy, complete with stock bore and rotating assembly. They swapped the heads for a set of 1971 casting 400 heads (Hence why it was burning coolant, since the difference in bore from a 267 and a 400 is half an inch, meaning the combustion chamber was bigger than the cylinder, overlapping onto the deck, burning up the head gaskets). From there they added a small no-name solid flat tappet cam, an edlebrock duel plane intake, and a Rochester 750 4 barrel. Add some Mickey Thompson quick release valve covers, a chrome air filter, and a hei distributor and you have the build.
I got a good laugh out of it, tossed out everything but the intake and valve covers, and ended up building a 396 (bored to 402) for my car with the help of a professional engine builder. Ended up making 380 hp and 410 lb ft out of it with stock crank and rods, stock iron oval port open chamber heads and a whopping 9.2:1 compression ratio so I could burn regular gas, And have lots of room for power with a little boost or a simple head swap. I’m quite proud of the combo, it’s perfect for a car show cruiser, good on gas when you pull out of the throttle, but still a lot of fun when you ask for more 😁
you have excellent reflexes, very impressed how quick you killed the throttle
Was just noticing that! The focus is incredible, if you look close he doesn't even blink while watching the run up! Those eyes have seen everything lol
Great Job on The Diagnosis and Teardown Nick n Vasili 🧰👨🏼🔧😎😀👍🏼
The phrase "sold a bill of goods" comes to mind with that 427. Can't wait to see what you guys do with it!
Hey Nick want to save a lot of time? Invest on a Probe Camera!
With a probe you guys could have inspected the Cylinder walls and Piston Heads without taking out the Engine Head via the Spark Plug holes.
There are many cheap ones but you might want to get one with high quality image to be able to see details like Cylinder Wall scratches, Cracks, Grooves and Rust.
Vitor. We have one, but my client wanted the heads off anyways
@@nickpanaritis4122 Nice
Great job, Nick
I had a duster , and the start key did not work in the door , door key was the same as the truck key . The car was bought off the showroom floor brand new .
Niel. Something wrong there. Never seen or heard of this issue on a Chrysler product.
@@nickpanaritis4122 i also had a valient bought brand new , 273 v-8 ( I think the slant six in the duster was faster ) and it was the same way starter key was the big key , the doors and trunk were the small key , worked good if you want to warm the motor up on a cold day , you could lock the doors and still have the engine running , wasn't a problem , it's the way the cars came in . Both were bought off the showroom floor
Love the background music video is awesome keep up the good work!