Anet A8 mod Y axis
Вставка
- Опубліковано 30 вер 2017
- Anet A8 mod Y axis
2020 V-slot 370mm with M5 tapping - ooznest.co.uk/V-Slot
2xMGN9 400mm rail & 4xMGN9H carrage - s.click.aliexpress.com/e/mQFQzbM
T-Nut m3 block - s.click.aliexpress.com/e/xDel6H2
MGN9 adapter to LM8UU - www.thingiverse.com/thing:208...
Hold Down Bracket - www.thingiverse.com/thing:168...
Cable drag chains - s.click.aliexpress.com/e/MrNneau
---------------------------------
ROYALTY FREE MUSIC by BENSOUND - www.bensound.com - Наука та технологія
Hello and thank you for sharing this upgrade. One question, what are the screws you use?
a greeting
As it seems to you if 2020 V-slot 370mm with M5 tapping ? :)
- M5x20
for rail mount M3x8
Hello, good work on this mod. How quite is the printer compared with how it was with Igus bearings? I'm working on upgrading to an AM8 frame, but I'm also considering going to linear rails for Y.
It's a little louder but given the stability it's trifle.
Could you give an indication to how much of a difference this upgrade made? And in what way? Is it a lot quieter? Does the improvement in quality warrant the cost and effort of upgrading?
Also another question: I notice you have the plastic articulating chain thing to hold your wires, do these make a noise when it moves? I’m considering printing my own but I don’t want to make the whole process more noisy.
It's a little louder but given the stability it's trifle.
about what plastic articulating chain is your questions
I don't see any reasons for printing cable drag chain s.click.aliexpress.com/e/MrNneau
@@RobertsKristins I see one. Once you get the 3d printer you should not buy anything from plastic I guess. Especially such a simple printable thing.
Rotorix FPV for me more easy buy normal plastic part for permanent operation. Yes for temporary or semple modelling you may print whatever what.
was very good, congratulations, and possible to do on the Z axis?
I'll think about it, but there's no need for it yet.
Do you make this Kit? I want this so bad so I can stop replacing bearings.
What type of nut and screws did you use to install the rail on the alluminium profile?
T-Nut m3 block link added in description
Great Idea! Awesome mod... :)
Now I buy MGN15 with C carriage they mount hole is a same as Y axis plate.
do you have a link to the actual item MGN15, there are a few sizes out there
if you told about adapters then MGN15 I used without it mount directly on carriage. if you mean, if you mean video with mgn15 it coming soon
Hi can you please post exact links on that you bought ?
No, I can't post exact link to 2x MGN9 400mm & 4x MGN9. Because I make special order from this shop
Your description of the parts says 4 rails and 2 carriages. I presume that should be 2 rails and 4 carriages !!
i would definitely build a better frame for the anet before putting in linear rails.
soon make video about it too
Hi, very interesting mod. You check the quality of the pronto whith this mod?? Thank yoy
Quality is fantastic. And it made printer construction more stability and stronger (in Y axis).
How much Z height did you lose with this mod?
I dont know, distance between table and print surface 90 mm
Roberts Kristins what is distance between top of bed and nozzle tip with z raised to top of travel
200+
This is very cool. A more detailed tutorial on this would be much appreciated!!!
how many details you need ?
Dlaczego aż 4 wózki? Te wózeczki mają sztywność pozwalającą na pracę frezarką cnc w stali bez gięcia.
aby nie jeździć na rowerze
Which size bearing do you use? MGN9H or MGN9C please
Maybe you can read description of this video ?
Came here for the build, stayed for the music 🤦🏽♂️🤦🏽♂️🤦🏽♂️
The aluminium frame that holds the heat-bed in this video, is not a standard ANET A8 frame, so the adapters you print out will not fit for 99% of people with an ANET A8 !!
Really ? please tell me why ? :D
Build this into a am8
almost
ReFitting 5 mm Screws into 8 mm holes (where the rods were? Geee that's precise. That's a crap Kit my friend.
Your vigilance is commendable! BUT you can use spacer from 8mm to 5mm. ;)
čau zinu pēz vārda latvietis
un ?
diiivaini man ariii anet a8 printeris
un latviijaa tas ir diezgan reti
Latvijā daudz, kas ir diezgan reti tai skaitā arī iedzīvotāji :D
nu jaaaa
Had to stop watching because of the music...
I like people without volume control :D Before writing meaningless comments go to the section "About"
Special for You - in this channel I leave video about what I want ...
If You something do not understand look one more and think.
If You not understand again then try ask about what You not understood or this channel not for You.
Ian Ide jjnnn
Maybe if you do what any intelligent human would do namely " Turn Down The Volume", it wouldn't be a problem for your ass.