Some switches has L1, L11, L12. L2, L21, L22. L3, L31, L32. L1, L2 and L3 are the loops. The life wire goes into L1, looped to L2 and to L3. The connections to the lights then connects to L11, L21 and L31 respectively.
Wow this is great. So if I have 5 wires coming into the socket chamber, it means the extra was used to tap voltage from the LCOM unto another socket elsewhere
Sir.. I have a 3 gang switch for 2 seperate lights and a fan.. My switch has nine terminals 3 L3 holes 3 L2 holes 3 L1 holes.. if the hot wires go to L1 terminals, which holes does the other wires go into L2 or L3 ??.. More importantly, how many wires should be run into the switch box from the joint box??.. You didn't respond to my last question.
Some switches has L1, L11, L12. L2, L21, L22. L3, L31, L32. L1, L2 and L3 are the loops. The life wire goes into L1, looped to L2 and to L3. The connections to the lights then connects to L11, L21 and L31 respectively.
@@powerelectric8833 My switch has 3 L1 holes, 3 L2 holes and 3L 3 holes... Do I have the wrong switch for this set- up since I can't see the numbers clearly on the back of your switch??.
Hi Sir, if my two gang one way switch only has L, and 1 saja? Is it L is input? And 1 is output to load? It didn’t write L1, it just writes 1. And it didn’t write Com too. So I’m confused which one is input and which one is load.
Sir i hve a 3 gang 2 way switch,i ll use it only for 1 way.it have L1 L1¹ L1², L2 L2¹ L2²,L3 L3¹ L3². In which one i ll have to connect the input power n the output for 3 lighting.can i connect the neutral in the switch.
Great video. I have a question please. In my sitting room I have a 3 way switch. 1 is for the sitting room light(which is also powered by another switch at another point in the room) 2 is for the outside light, 3 is for the light inside near the back door. The problem is the outside light won't come on until the 3rd(light inside near the back door) is on also. I would like the 2nd switch to be just for the outside light and the 3rd switch to be just for the light near the back door. What could be the issue and how do I solve this problem please?
Problem at home left switch turns my bathroom light on and off. The middle and the right ones could trolly my upstairs light amp down stairs light but my builder as changed the the switch to a new one and now the middle and right one don't do what they was doing before any ideas
Extremely helpful. Been confused on how to fix my switch, I was able to do it with no stress after watching this video. Thanks a lot.
Some switches has L1, L11, L12. L2, L21, L22. L3, L31, L32.
L1, L2 and L3 are the loops.
The life wire goes into L1, looped to L2 and to L3.
The connections to the lights then connects to L11, L21 and L31 respectively.
You have breaked it well for us to understand...... otherwise I was asking myself the labels which he is connecting
Thank you for teaching me
Good work
Really the big job u made it so clear to me,I do appreciate sir/madam Eng
Good job.. love it try to know more of it
Thanks for making this video - it helped me a lot. And please keep making more videos
Thanks that's amazing great electrical idea video channel I like it Bless
Preciate the good work 🤝
Nice
.
❤
.
Beautiful
Wow this is great. So if I have 5 wires coming into the socket chamber, it means the extra was used to tap voltage from the LCOM unto another socket elsewhere
Thanks a lot bro this really helped 🎉
ခလုတ္တစ္ခု.မီးတစ္ပြင့္လင္ရမည္။
အခုတစ္ခုဖြင့္....၃..လံုးလင္းေနသည္။
Excellent job bhai ❤❤❤❤
Thank you help a lot
I can't see com, L1 and L2
Sir.. I have a 3 gang switch for 2 seperate lights and a fan.. My switch has nine terminals 3 L3 holes 3 L2 holes 3 L1 holes.. if the hot wires go to L1 terminals, which holes does the other wires go into L2 or L3 ??.. More importantly, how many wires should be run into the switch box from the joint box??.. You didn't respond to my last question.
Having a fan on a switch isn’t the best option mate best to have it running with the lights instead of having it in on its own independent switch
Great one
Mntp bosku
What type/size of cable are you using & can I use 1.5 Twin and earth?
Hi, for lights it's 1.5mm
It would be 2.5 twin and earth most likely 1.5 is mostly used in lighting
Thank you❤
Very good sir
Sir iska thewri bana kar dikhaiye 3.wa.4.way & 2.3.4.gang ka paper pe
Is it L1 you connected the live load into or L2?
Some switches has L1, L11, L12. L2, L21, L22. L3, L31, L32.
L1, L2 and L3 are the loops.
The life wire goes into L1, looped to L2 and to L3.
The connections to the lights then connects to L11, L21 and L31 respectively.
Hi.. You use L1 for 'live' wire but when does L2 come into use..or does it??
Use L1 when you connect 2way switching
@@powerelectric8833 My switch has 3 L1 holes, 3 L2 holes and 3L 3 holes... Do I have the wrong switch for this set- up since I can't see the numbers clearly on the back of your switch??.
Hi Sir, if my two gang one way switch only has L, and 1 saja? Is it L is input? And 1 is output to load? It didn’t write L1, it just writes 1. And it didn’t write Com too. So I’m confused which one is input and which one is load.
Good
Do youbuse L1 or L2 in this switch
Hi! use L1
Terbaik
Sir i hve a 3 gang 2 way switch,i ll use it only for 1 way.it have L1 L1¹ L1², L2 L2¹ L2²,L3 L3¹ L3².
In which one i ll have to connect the input power n the output for 3 lighting.can i connect the neutral in the switch.
No neutral in the switch,
use l1 input l2 output
Voice podunga
Right
Does the live go to the common
Yes
Great video. I have a question please.
In my sitting room I have a 3 way switch. 1 is for the sitting room light(which is also powered by another switch at another point in the room) 2 is for the outside light, 3 is for the light inside near the back door.
The problem is the outside light won't come on until the 3rd(light inside near the back door) is on also.
I would like the 2nd switch to be just for the outside light and the 3rd switch to be just for the light near the back door.
What could be the issue and how do I solve this problem please?
You have made the 3 as the common switch, so you need to separate them
Please check camera quality, please we can't see it well
Sorry for that, working on it 🙏
broo jaribu kufanya ukiwa na sauti inapendeza
Y no sound
Problem at home left switch turns my bathroom light on and off.
The middle and the right ones could trolly my upstairs light amp down stairs light but my builder as changed the the switch to a new one and now the middle and right one don't do what they was doing before any ideas
Wow, 12v I hope
Yes
Chez
কথা বলেন
You are demonstrating with no talking
Yes, it's a demonstration 🙂 I'll talk next time
Are kam se kam Munh se bolkar to connection Karta Munh Mein Dahi Laga Liya Hai Kya
I don't like
Thanks for watching