Replacing the AC Blower Motor on the E36 BMDubya
Вставка
- Опубліковано 30 вер 2024
- Today we are going to be replacing our broken Blower Motor in the BMDubya. It's not our usual content, but I think some people will find this helpful so I tried to make the install short and sweet.
-
Don't forget to Subscribe: goo.gl/2SdRG8
-
🔧Tools used in this video🔧
Magnetic screw driver: amzn.to/2IDLpqk
Magnetic Torx bit set: amzn.to/2ISPqrh
(Can't remember the size, but most likely a T15 😅)
27mm deep socket: amzn.to/2XKIlio
13mm socket
10mm socket
7mm socket
🔩Parts used in this video🔩
BMW Blower Motor: amzn.to/2Kow5Bt
The BMW part number is 64118390208. There are some cheap options out there, but this is one of those jobs I prefer to only do once.
Disclaimer
I am an Amazon Associate and I receive a small commission if you choose to purchase tools or parts through my links. They don't cost you any extra and it helps us to continue creating more fun videos like this one.
Our videos are for entertainment purposes and if you came for expert automotive advice, I am sorry 😅 because I am definitely not an expert. These videos are about our lives and our current Daily Drifter Builds.
We like to show the struggles that most channels try to make look easier than they are. We build our cars inside my garage with the limited tools we have available. I hope you still find my failures entertaining and have a great day!
-
Social Garage:
Instagram / the_daily_drift
/ austinatm
Snap us @kyle00088
Tweet us / the_daily_drift
-
-
-
Music Credits
UA-cam Aduio Library Tracks
- Free Dog
If you have a hard time trying to get the wipers off try pushing down on them close to the nut (on the metal part) while prying up at the same time
You have to remove the entire engine to get to the blower motor?! Or is the absence of the engine non related to replacing the blower motor?
you dont need to remove the motor
@@masterboeing7471234 engine*
Motor is electric and engine is by intern combustion
@@jean-micheldubois5110 a engine is a type of motor you absolute carp
I noticed the sheet metal below the windshield has been bent upward quite a bit, allowing the blower fans to clear the opening. I'm tempted to do the same lol.
This is not the good video. “I’ll show you how to get it in”. Magically in without showing anything… good job buddy.
i 100% understand why this guy stopped on this job. that clip holding the motor in is the reason why i parked a whole running e36 to be honest..
i put 12 volts on the old fan and no spinny. can I do the same to the new fan and see spinny?
I love it when people don’t know how to tell you what size bolts are
Really Helpful, thanks for the vid man, made it way easier!
I'm stuck at trying to get that faceplate off that fell off yours.
Can you get get a clip to fit while I will pay for the flight.
Fantastic video!
You can't do it with the engine in place!! Sucks ass! German vid is an oler car with an old one sided fan so his was easy! Can't even fit the old fan out of the space between the engine and the fire wall!
That could be the case, I don't know because my engine was out. I would imagine worse case scenario you could remove the intake to make more room.
5:57 you said we have had our share fair of problems lol u meant fair share of probs
Yeah I have been hit in the head one too many times 😅
Can’t wait to see everything put back together
Hopefully soon we will have it all back up and running!
Dude, thanks!
Anytime, just hope it helps!
The Daily Drift mine’s been making a ‘chirp’ sound for ages. Think it’s due to replace it.
Valence? Its called a cowl....CRINGE
You’re a 🤡