How to bind to Eachine mini P51D with Radiomaster multiprotocol Radio F4U corsair 400mm RC Plane
Вставка
- Опубліковано 25 лип 2024
- Protocol - V761 4ch
Gyro use channel 5
-100% Beginner mode
0% Mid mode
100% expert mode
Receiver board Gyro www.banggood.com/Eachine-Mini...
RadioMaster TX16s Affiliate LINK www.banggood.com/RadioMaster-...
Thanks for Watching
Like comment subscribe
Older video but exactly what I needed so I can fly using the one radio for all my planes and drones. Thanks
Thank you so much!! I’ve been trying to figure this out for months!
This was a massive help getting the gyro switch sorted. Great video. Thank you.
Thanks for the video. You may know this by now but you don't need to create three entries in the mixer for gyro. You can just set the source as the switch and leave the "switch" section blank. Depending on the switch position you'll get -100 0 or 100 as the output.
Very helpful. I use the receiver boards for scratch building and did not know how to set them up on my Radiomaster 16. Great
Nice, thanks for letting us know. Fly Safe!
Awesome, I have radioking tx18s but very easy to follow along. Almost the same transmitter's. Just gotta go test out the stunt button to see if it works. Thanks
Just wanted to say thanks for this! Its prompted me to but the P51D.👍
Yes the p51 is great a plane
Thanks a lot for making this vid mate. I'll definately be making use of it when my tx16s arrives this week. Cheers for the great vid.
Thanks its a great radio
Keep up with the awesome vids. To the point vids like this are always great to save and revisit
Glad to hear.
Just splurged on the Carbon edition with the AG01 gimballs.
Batteries are charging as we speak, lol.
Amazing how far this technology has come since the JR Max4 I bought in 1991, lol.
@@blowy48flyrc
Thanks a lot. This video is very helpful!
Great video! Thanks for the info.
Thanks for stopping by
That was really helpful . Thanks
Happy I can help thanks
Interesting technique to use Channel 5 weighting of -100%. I reversed the channel on the Output screen. Obviously the same thing. But shows how flexible Open TX is.
Yes for me it makes it easy to read
Hey! Great video! I was just wondering if you could tell me which multi protocol module you showed in the taranis x7?
Are you able to set up the stunt button for the plane with your Radiomaster?
Good day..sir how to set the throttle hold or of in that plane.
Thank you for this very useful video.if you could give my some advice since I have not been able to make link with the steps that you show. the only thing different is that my radio is mode 1out de box an de plane is in mode 2 thank you so much
I'm not sure what you are talking about there??? If you mean that the radio you have received is set for mode 1 (ie the Throttle and Ailerons are on the right stick and the Rudder and Elevator on the left) but you require the radio to be switched to Mode 2 (Throttle and Rudder on the left plus Ailerons and Rudder on the right) then that is done in the TX16S radio set-up. It has NOTHING to do with the plane. Planes will fly exactly the same (with a correctly set-up transmitter) whether the radio is Mode 1 or Mode 2.
Can the tx12 bind to these planes as well?
The 3 mode switch does not seem to work with the XK T28 or P40 planes. The gyro won't disable :(
Hi. How i Will configure the acrobatic Button? Please.
Received my P51 today. Binding with the TX16s works as described in your instructions. What I can't do is calibrate the plane's horizontal position. According to the instructions, both sticks should be held down and outwards and then it should beep. But the beeping stays away. Other stick positions were also unsuccessful. How did that work for you? By the way: I don't have to arm the motor as described in the instructions. The motor also works without arming
Nice to hear Yes on the original radio with the sticks have to be held down and outwards but on TX16S you like to set a switch to channel 6 to calibrate level
Does using the Tx16s increase the range on these planes? If I put an fpv camera in these little planes will I be able 4o fly further away? Thank you
Good question i guessing a better radio should increase the range but I don't know. I did see I video suggested to me on UA-cam fpv on eachine 400mm mustang so do a search
Great vid 👍 How do you set up the stunt switch?
yes see my other video here ua-cam.com/video/qRjItWkhFEM/v-deo.html
Hello, whene i bind, it will only work on low power mode? Is that safe?
Does it also work with edge tx
Yes great video for great planes!
I struggle to set up the calibration on a 2-, position switch. How making it going from -100% to 100%?
I can only go from 0 to 100%.
I tried 200% weight, 100 offset, .. curve... But no success.
Please help me....
I only wonder how did you find out the protocol these eachine/volantex mini planes are using? Is there a site out there with repository of different protocols?
No the multi protocol site- link in my pinned comment gives you a bit of help or you can just google it
Should you add expo with these little war birds to make them less squirmy and more smother and if yes then can you show how thanks
Yes 15 to 20 expo makes it nice to fly
same for Radiomaster boxer 4-1 M8? cheers :D
Tqvm..gud explanation...my question can radiomaster tx16s binding with eachine F22 mini raptor?
Yes it does
Can I use this RadioMaster TX16S MKII V4.0 Hall Gimbals ELRS JP4IN1 Transmitter Remote Control Multi-protocol OpenTX And EdgeTX With this RadioLink R12DS 2.4GHz 12CH DSSS & FHSS Receiver for RadioLink AT9 AT9S AT10 AT10II Transmitter Support For SBUS PWM ?
I have a Volantex F16 Bound to my XT16S. When i first plug in the battery, everything is working as it should. i have all control surfaces on TRIPLE RATES through the INPUTS tab. I have THROTTLE CUT enabled on a switch to overide channel 3. But when i ENABLE THROTTLE, the GYRO seems to take over all my CONTROL RATES. And then the GYRO OFF SWITCH doesnt disable the gyro. I tried disabling the throttle cut function. Made a totally new MODEL SETTING from scratch a couple times. but i keep running into the same problem. As soon as the throttle kicks on, the gyro gets activated. Any thoughts on what could be going wrong?
Not sure but the gyro does activate when you hit the throttle in the gyro does stay on
I have a weird problem I've Done all the instructions but after binding there are no controls unless I click the range tab next to the bind . It only works when the range screen is open . Any ideas thanks
I have sussed it. You need to select the low power mode option I the setup of the model
Are these the RTF version or BNF?
CAN I BIND MY RTF ONES TO THIS TRANSMITTER?
Any recommendations on how to bind the eachine mini cessna 550? I was able to bind my Eachine TX16S to eachine trojan without issue, but when I copy the model in TX, rename and attempt to bind to Cessna 550, model doesn't respond.
Good question but I haven't got the eachine Cessna so I don't know.
Totally different protocol! Try MT99XX Dragon sub-protocol.
I did everything like you, and mine does bind, but control surfaces do not respond, Giro is on. Control surfaces work when I put the radio in Range mode
, can you tell me what to do ??
I had same problem, the red light stopped blinking, but surfaces didn't move with the sticks.
Finally when I turned on the "Low Power Mode" it worked.
I'm not really sure what "low power mode" does, but that did the trick, for some odd reason.
TX16S
Why i need to rebind with Eachine mini plane every time on, is it nomal ?
Yes we were having the same problem and having trouble flying 2 planes together. So I updated the firmware for the 4 in 1 internal module and its working better now.
Hi, I have a Jumper radio and have Bound these little planes ok but I can't get them to bind to the Eachine TX16s.. I have followed your Vid very carefully but they wont bind.. do you know if there is a reset button on the receiver in these planes?.. Regards, Pete
Thats weird no reset button they bind up ezy you can change radios from one to another and back again all I can think of is to update your eachine tx16s sorry
@@blowy48flyrc Yes I was thinking that myself.. Thanks for you reply.. Regards, Pete
I have found out what this is... On the latest version of Open TX, on the setup page you need to check the box for low power.. If you don't do this it will not bind :) happy days
@@PeterWinnett someone else said that but I don't do it
@@blowy48flyrc The first thing I did was load 2.3.14. But it still wouldn't work so I stated changing settings to find the problem and that's when I found that I needed to check the low power button. Come to think of it it's the same on my Jumper T8s but I didn't think of that at the time :) :) Happy days, thanks for your input. Regards, Pete
Hey blowy. I have the eachine version of tx16s - when I bind it, I can’t control any surfaces unless I use ‘low power mode’ option. Have you any thoughts on that?
Yes I heard other people having the same problem and I think updated the internal module has fixed the problem and I think your eachine radio was made by radiomaster
@@blowy48flyrc I’ve also had this problem and my radiomaster was bought new just last month so it can’t be the module as the software is pretty much up to date.
Any reason you can think of why i have to keep rebinding the model?
Yes me were having the same problem and having trouble flying 2 planes together. So I updated the firmware for the 4 in 1 internal module and its working better now
@@blowy48flyrc I was just about to ask, a friend and myself experienced me being able to control both warbirds with one radio even with changing the receiver number.
@@blowy48flyrc That worked, thanks.
Good to hear it works
My TX16S will not bind to the warbird. I've tried many things, followed your instructions to the tea. It just woin;t work. I even downloaded the latest internal module firmware
Have right protocol loaded, put battery in plane, and lift the right bottom temp switch...see if that works
@@MrDLRu "right bottom temp switch"? The only thing that worked so far is putting the TX16S into low power mode, then it will bind, but if I fly it like that, it loses connection as soon as the plane gets to about 100 feet or so (and if I put the plane out of low power mode, it loses the bind).
Channel 6 and 8 must be in -100 position ! I believe 6 is calibration and 8 perhaps return to home or something. If one of these two are activated (not -100) strange things happens ... On my radio these channels are on SF and SC as defolt
Mine binds but nothing works unless I put the tx16s in low power mode or range test then everything works but as soon as in full power nothing works apart from stabiliser
That's weird. Maybe change the receiver number.or move radio away from the plane
same here
Have you fixed this? Experiencing the exact same - not filling me with confidence and a bit worried about loosing the plane out of range. How was your experience been with this?
@@Nethlo Have you fixed this? Experiencing the exact same - not filling me with confidence and a bit worried about loosing the plane out of range. How was your experience been with this?
@@proastroz5759 use low power mode then all works fine
This protocol has problems but it seems to be fixed with the new updates. I know its a pain to update your radio or you can just put up with it.
Links below
WE had to re-bind to plane every time we wanted to fly
AND a lot of trouble flying 2 planes together - kept binding to the wrong plane
The Multi-Module Protocol info page link here - github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md
And Multi-Module firmware update link here - downloads.multi-module.org/?rmtx16s
Long shot you will see this but I have same problem that I loose bind every time I disconnect battery.
Dear Sir
I'm trying to bind my mini trojan t28 to my radio master tx16 max. But it doesn't work. But as soon as I put it on range and press the scroll wheel it binds. Why is that. I followed your setting up perfectly. Help please
Kind regards
Johan
Yes I know this protocol has problems but it seems to be fixed with the new updates. I know its a pain to update your radio or you can just put up with it. Links in my pinned comment
First want to say your videos are very clear and understanding. Sorry where do I get your pinups
Sorry pinned comments 🙈
Im getting the same issue with my f4u mini and the eachine tx16s got everything set up how all the videos show but no controls when you hit bind, but if i click range then the control works 🤔 i have set up a omp s720 with no problem at all any ideas how to get this to work with the f4u ?
@@coopers-cave interesting your having same problem on your eachine tx16s. Im guessing theyre both shiped with the same firmware. so update your radio should fix it
In ch5 you dont need to what you did, I just sent a switch in the 2nd line and it it gives me the 3 rates