I like a technician that cleans work are and parts as he goes. I thought I was the only one that does LOL. Also that silver part is for draining the filter but I never found one that works, they normally get frozen stuck
Thankful and grateful for this video. The shorter the video, the better for all. For example, we do not need to see how you fill all the oil. Not a sermon, just a thought.
Peter, as I’m watching the video you put the new o-ring with the flattened o-ring and use the first old o-ring you took off to put on the filter housing.
Thankyou ,I have a rave 4 2010 .and had q problem with nicer near heat vent I was wondering if you would think of making a video on how to solve the mice making a home there? Thankyou for the clear directions
I don't waste time with the filter drain, either. If it's already sealed there, why introduce a possible failure? I put a quart-size freezer ziplock bag around the filter when I remove them and it catches all of the oil as I unscrew it.
Love your videos! Would you consider covering the VTTI cold start rattle that seems common. My 2012 2.5l Rav4 is suffering from it. I am not sure if it can be ignored. Thanks
It *can* be ignored, however only for so long. The correct repair is replacing both VVTI cam gears. Shop around, some shops charge way too much. I just did mine in 3 hours. However I have a decent amount of mechanical knowledge. My 2010 Rav4 4 cylinder was rattling quite loud when starting cold. By the way, I used a set of aftermarket gears from Amazon that cost $150.00. OEM parts are much more expensive.
Always changed it without raising it and nothing special except I got the Toyota wrench tool. Sometimes the drain plug will not loosen. I've also used the drain plug to tighten. Yeah no need really on the silver cover. It does have its own seal though I believe. Do pay attention to the groove when u remove. You can feel the gap with your fingers. These do drain for a while. Grab a coffee. I have like 2 of the knockoff wrenches. They work ok but the factory one is nicer.
Any difference between filtering capabilities of this type of filter vs spin on filter? Why does Toyota switch to this design. Gets very messy and chance of failure
Looks like you have the oil filter cap removal tool for the 1.8 liter engine found in the Corolla and not the one that fits thus RAV4. I take that back. It seems that O'Reily has some sort of universal wrench that is suppose to work on all Toyota oil filter caps. Other companies make two different wrenches. Also, proper procedure is to drain the oil filter housing before removing the oil filter cap to make less of a mess. At least you mentioned it. I think it would have been better to do it that way and then just mention that you normally just remove the whole thing.
Thanks for your video. I get that Toyota is saving on the disposable steel can but the old style was so much easier. Sometimes I take it in for as oil change and sometimes I DIY. I have the filter wrench and all but this time the filter was put on (at a dealer) with a death grip and I'm afraid I'll break the cap. Is it any easier to remove when cold or hot? Or any other advice? Thanks!
Great video, thank you! It has encouraged me to try changing the oil myself in our Rav4. Did you always use torque wrenches when tightening in the dealership? Or would you often just hand tighten by feel?
if you dont have a torque wrench. when you screw on the oil filter, screw it til it hits the base and do a 3 quarter turn. for the oil drain bolt just hand snug, do not make it super tight. And dip your finger in your new oil and lubricate the new oil filter gasket so it helps removing the filter easier next time when you do it. And make sure you get some cardboard to put on the floor or your going to make a mess unless you have a bag of absorb all. and dont forget to write down your mileage when changing.
hello. mistake #1.never remove engine oil cap and dip stick and leave open like that.any debris could get in there.the correct way is to unscrew the cap completely and leave it in place;same with dip stick ,pull up a bit to break seal. mistake #2 always open silver cap first,gives you a chance to drain filter cap and at the same time put anew seal;it's provided in the filter and seal kit.don"t be lazy. keep up the good work .
@@ToyotaMaintenance Amsoil Signature Series Full Synthetic is simply the best oil on the market. When used in combination with a long life oil filter, its extremely long service life makes it cheaper to use. Project Farm UA-cam Channel did some thorough testing comparing all major oil brands and it came out on top. Some people think Toyota is too expensive and buy a cheaper brand, do they really save money and time in the long run?
Peter Boissiere AMSOIL is expensive and not sold at a lot of auto part stores . After watching the project farm oil test , Pennzoil is the oil I use . It barely lost to AMSOIL and was better than AMSOIL in some categories. Plus , it’s available at most part stores , and a lot cheaper, especially if you buy it at Walmart. In addition, Pennzoil has mail in rebates online , which makes it cheaper than most oils out there .
I was always taught to fill the filter with clean oil before replacing it. Why did you skip this step? Also, you’re teaching people how to change oil at home, so it’s nice that you tell us how to tighten without a torque wrench, but how about showing us how to do it *without* a lift or pro oil catcher pan? Essential questions arise, if you think like this… Do I have enough room under the car without lifting it? Does it matter if the car is level?
How often should I change my oil/filter when using Synthetic Oil? I heard 5,000 miles and others are saying 7,500-10,000 for synthetic Oil, but im not sure what to believe. Same 2010 Rav4
Does manual say 5K? Also depends how hard you drive vehicle and if you want to baby it (5K) or need to save money. I would monitor color of oil and once it starts to go dark replace it. Likely with a max of 7.5K or 12 months.
Maybe to make it look intimidating enough to have to take it to a dealer for a (what should be) simple oil change. I have a rav4 with the canister oil filter myself. Shame on you Toyota!@@ToyotaMaintenance
Thanks for including the mileage, it helps provide a clearer picture of the longevity of the vehicle.
my pleasure
I wish I knew someone this serious about doing an oil change to the exact torques, etc, that this fella does. Very hard to find nowadays!
EXACTLY what I needed to change my wife's Rav4 oil. Thank you!!
I like a technician that cleans work are and parts as he goes. I thought I was the only one that does LOL. Also that silver part is for draining the filter but I never found one that works, they normally get frozen stuck
Thankful and grateful for this video. The shorter the video, the better for all. For example, we do not need to see how you fill all the oil. Not a sermon, just a thought.
Peter, as I’m watching the video you put the new o-ring with the flattened o-ring and use the first old o-ring you took off to put on the filter housing.
this did seem to be a sloppy video for you?? Torque specs?, replace the small oil drain gasket??
Thankyou ,I have a rave 4 2010 .and had q problem with nicer near heat vent I was wondering if you would think of making a video on how to solve the mice making a home there? Thankyou for the clear directions
Thank you, very straight forward and honest info.
I don't waste time with the filter drain, either. If it's already sealed there, why introduce a possible failure? I put a quart-size freezer ziplock bag around the filter when I remove them and it catches all of the oil as I unscrew it.
thanks for sharing
Love your videos! Would you consider covering the VTTI cold start rattle that seems common. My 2012 2.5l Rav4 is suffering from it. I am not sure if it can be ignored. Thanks
It *can* be ignored, however only for so long. The correct repair is replacing both VVTI cam gears. Shop around, some shops charge way too much. I just did mine in 3 hours. However I have a decent amount of mechanical knowledge. My 2010 Rav4 4 cylinder was rattling quite loud when starting cold. By the way, I used a set of aftermarket gears from Amazon that cost $150.00. OEM parts are much more expensive.
Always changed it without raising it and nothing special except I got the Toyota wrench tool. Sometimes the drain plug will not loosen. I've also used the drain plug to tighten. Yeah no need really on the silver cover. It does have its own seal though I believe. Do pay attention to the groove when u remove. You can feel the gap with your fingers. These do drain for a while. Grab a coffee. I have like 2 of the knockoff wrenches. They work ok but the factory one is nicer.
Excellent video! What is the name of the work light you are using? Looks like a handy tools to have while performing maintenance on my Toyota.
Unbelievable! The last guy put the other gasket on top of the other one
Any difference between filtering capabilities of this type of filter vs spin on filter? Why does Toyota switch to this design. Gets very messy and chance of failure
Looks like you have the oil filter cap removal tool for the 1.8 liter engine found in the Corolla and not the one that fits thus RAV4. I take that back. It seems that O'Reily has some sort of universal wrench that is suppose to work on all Toyota oil filter caps. Other companies make two different wrenches.
Also, proper procedure is to drain the oil filter housing before removing the oil filter cap to make less of a mess. At least you mentioned it. I think it would have been better to do it that way and then just mention that you normally just remove the whole thing.
Thanks for your video. I get that Toyota is saving on the disposable steel can but the old style was so much easier. Sometimes I take it in for as oil change and sometimes I DIY. I have the filter wrench and all but this time the filter was put on (at a dealer) with a death grip and I'm afraid I'll break the cap. Is it any easier to remove when cold or hot? Or any other advice? Thanks!
I think it's easier when it's still warm I have burned myself a little but I think warmer always easier.
I think you have it backwards. The 19 and newer use the steel canister filter. The old RAVs use the junk cartridge filter.
Great video, thank you! It has encouraged me to try changing the oil myself in our Rav4. Did you always use torque wrenches when tightening in the dealership? Or would you often just hand tighten by feel?
if you dont have a torque wrench. when you screw on the oil filter, screw it til it hits the base and do a 3 quarter turn. for the oil drain bolt just hand snug, do not make it super tight. And dip your finger in your new oil and lubricate the new oil filter gasket so it helps removing the filter easier next time when you do it. And make sure you get some cardboard to put on the floor or your going to make a mess unless you have a bag of absorb all. and dont forget to write down your mileage when changing.
hello.
mistake #1.never remove engine oil cap and dip stick and leave open like that.any debris could get in there.the correct way is to unscrew the cap completely and leave it in place;same with dip stick ,pull up a bit to break seal.
mistake #2 always open silver cap first,gives you a chance to drain filter cap and at the same time put anew seal;it's provided in the filter and seal kit.don"t be lazy.
keep up the good work .
I think you should start car repair channel
@@ToyotaMaintenance i don't have anytime at all my friend.you do it much better and you are good at it.i always enjoy watching your channel.
Hello! I would like to see how to clean the RAV4 engine, thank you very much
EXCELLENT 👍
Very good explainations ! Thanks a lot
you are welcome
@@ToyotaMaintenance I am amazed that the two gaskets together didn’t cause a major oil leak! 😵
Thanks for sharing your video,useful information.
Thanks for the video
Have u tried amsoil motor oil
not yet , very expensive , right ?
@@ToyotaMaintenance Amsoil Signature Series Full Synthetic is simply the best oil on the market. When used in combination with a long life oil filter, its extremely long service life makes it cheaper to use. Project Farm UA-cam Channel did some thorough testing comparing all major oil brands and it came out on top. Some people think Toyota is too expensive and buy a cheaper brand, do they really save money and time in the long run?
Peter Boissiere
AMSOIL is expensive and not sold at a lot of auto part stores . After watching the project farm oil test , Pennzoil is the oil I use . It barely lost to AMSOIL and was better than AMSOIL in some categories. Plus , it’s available at most part stores , and a lot cheaper, especially if you buy it at Walmart. In addition, Pennzoil has mail in rebates online , which makes it cheaper than most oils out there .
@@robertbonner5973 Amazon currently has 5 qts of Penzoil Ultra at about $21, and occasionally dips below $18. Hard to beat.
@@koomo801 It is hard to beat unless you use Amsoil.
does anyone know the size of that drainage nut?
14mm
Thanks!
Thank you
Thank you for nice video. Definetly check the coolant level as I see it must be already on Low..
I was always taught to fill the filter with clean oil before replacing it. Why did you skip this step?
Also, you’re teaching people how to change oil at home, so it’s nice that you tell us how to tighten without a torque wrench, but how about showing us how to do it *without* a lift or pro oil catcher pan? Essential questions arise, if you think like this… Do I have enough room under the car without lifting it? Does it matter if the car is level?
The wind must blow south approximately 5mph if it's 10mph the oil change will be a waste
How often should I change my oil/filter when using Synthetic Oil? I heard 5,000 miles and others are saying 7,500-10,000 for synthetic Oil, but im not sure what to believe. Same 2010 Rav4
Does manual say 5K? Also depends how hard you drive vehicle and if you want to baby it (5K) or need to save money. I would monitor color of oil and once it starts to go dark replace it. Likely with a max of 7.5K or 12 months.
5000 miles even if full synthetic.
I do 4k miles
where do i take my old oil?
Your local auto part store probably has a drum you can dump it in.
I take my oil to Autozone. When their tank is full I take to Jiffy Lube. Both will accept for free.
With mice near thheater
nevermind. just watched the rest of the vid
The new RAV4 has gone back to the metal canister filter. The cartridge filters are garbage.
you are oddly creepy and informative
I just watched you put an old o-ring on the housing. Sloppy!
Never just throw crap down on a tray...
Looks like he did to me too.
If you will carefully review footage , you will find that I have instaled new dry O-ring....but it looks confusing , I have to admit
What was wrong with a spin on oil filter? Stupid, stupid, stupid engineering.
I have no idea....maybe trying to save materials and the world ?
Maybe to make it look intimidating enough to have to take it to a dealer for a (what should be) simple oil change. I have a rav4 with the canister oil filter myself. Shame on you Toyota!@@ToyotaMaintenance
@@marklangston7710 For intimidating, try removing the air dam and the skid plate on a 4Runner every time you change the oil.
I am looking at 2 2010 RAV4 for my daughter. One has the 2.5 4 cylinder and the other has the 6 cylinder. Which engine is better?
v6!
Try for the V6! That was the last generation of RAV-4 that offered a V6.