Great video guys. I put a Leatherman Renegade solo saddle on my 2014 last year, made a huge difference over the stock. Especially like the Locktite on the counter shaft nut and the torquing of all essential bolts.
Great video, great bike. Love the mural. But especially love the Airborne Regiment sticker on the inside of the fairing. AIRBORNE. You guys did an amazing job.
Awesome vid guys, .... but you forgot to include the " Straight-ahead" fork compression press with about 20 ft lbs torque on the fork clamps to align the front tire true-straight..and then tighten the forks to spec and test ride..... ( or you did that and did not film it)..... If so my bad, no worries, I missed it , ... Stay Safe
Awesome, guys. I'm looking at downsizing from my Vulcan 1600 Classic---great bike but getting heavy for me as I age. ...been looking at the 950 Tourer for a couple of years; also considering the Sportster 1200 Low because I've always wanted a Harley. So, if I do the Yamaha, can I send to you guys to do your thing? Smile. Also, the resolution on your camera is outstanding. Thanks for sharing. Safe & fun riding.
@@weron021 Many thanks. It is a blessing that you and your friends have the skills, talent, and tools to do your own work...no doubt that kind of servicing would cost at least $2k...if a shop could be trusted to do the work. Take care...be well.
@@weron021 To learn all of that is awesome! Not all bike shops are bad, but it's a roll of the dice going to one. ...even the dealers take shortcuts and don't want to accept responsibility for their work. No doubt bikers are standing in line for your thorough work. Be well.
Hi, my wife owns a 2014 tourer... bought it last year in North Bay, On. I was just wondering why you marked and indented the nut around the pulley? thanks and great vid!
Some times those nuts come loose and you need to check them often, and this is a quick reference to me if everything is lined up than we are good to go if not you have to readjust
@@weron021 oh, ok.... good to know. I didn't know they loosen up. Might have to look into that. So, once you tighten it up and place a mark, how long after should you check?
@@weron021 That is very respectable of you ! Servicing is expensive , where ever ! I ment that part are so less expensive in USA . Beside , you have funny small VAT compares with Eu !
Great and exciting video, thanks for sharing, just turned off the noise in the background and was able to feast my eyes.
Great video guys. I put a Leatherman Renegade solo saddle on my 2014 last year, made a huge difference over the stock. Especially like the Locktite on the counter shaft nut and the torquing of all essential bolts.
Congrats! One of the best motorcycles ever made. Truly the Goldilocks of motorcycles 👍
I have a 2012 year model.
Thank you, this one belongs to my friend, It is an awesome bike to work on.
Amigo no sabes qué medida es la barra de tu motocicleta
Great video, great bike. Love the mural. But especially love the Airborne Regiment sticker on the inside of the fairing. AIRBORNE. You guys did an amazing job.
The strip of foam was only needed on the right side of the Speedo cover.
Awesome vid guys, .... but you forgot to include the " Straight-ahead" fork compression press with about 20 ft lbs torque on the fork clamps to align the front tire true-straight..and then tighten the forks to spec and test ride..... ( or you did that and did not film it)..... If so my bad, no worries, I missed it , ...
Stay Safe
It is not in the video, This project was done in winter, but we we allinghed every thing in the spring. Thank you. Ride safe.
Awesome, guys. I'm looking at downsizing from my Vulcan 1600 Classic---great bike but getting heavy for me as I age. ...been looking at the 950 Tourer for a couple of years; also considering the Sportster 1200 Low because I've always wanted a Harley. So, if I do the Yamaha, can I send to you guys to do your thing? Smile. Also, the resolution on your camera is outstanding. Thanks for sharing. Safe & fun riding.
Yamaha Turer is extremely realiable bike and east to work on, also the insurance is cheaper since it is a 950cc
@@weron021 Many thanks. It is a blessing that you and your friends have the skills, talent, and tools to do your own work...no doubt that kind of servicing would cost at least $2k...if a shop could be trusted to do the work. Take care...be well.
@@powerforward1955 I had bad expiriance with the motorcycle shops and I have decided to learn all of this. Now I am saving many thousands of dollars.
@@weron021 To learn all of that is awesome! Not all bike shops are bad, but it's a roll of the dice going to one. ...even the dealers take shortcuts and don't want to accept responsibility for their work. No doubt bikers are standing in line for your thorough work. Be well.
@@powerforward1955 Thank you.
Hi, my wife owns a 2014 tourer... bought it last year in North Bay, On. I was just wondering why you marked and indented the nut around the pulley? thanks and great vid!
Some times those nuts come loose and you need to check them often, and this is a quick reference to me if everything is lined up than we are good to go if not you have to readjust
@@weron021 oh, ok.... good to know. I didn't know they loosen up. Might have to look into that. So, once you tighten it up and place a mark, how long after should you check?
I check it every time going on a long trip or two times a year
Those KYB forks service parts are crazy expensive in Europe !
That is why I do all my work, and trying to help other people by producing those videos.
@@weron021 That is very respectable of you ! Servicing is expensive , where ever ! I ment that part are so less expensive in USA . Beside , you have funny small VAT compares with Eu !
Hello, What batwing fairing does he have on it?
This was a custom made batwing. A local fabrictor mad this it cost around 1000$ plus the wrap for 300$.
What that "music" for, to demonstrate what real hard men you are? Rather than explain what you were doing, then we might have learnt something.
Sometimes there is no need to explain, just listen to the musik and enjoy the video, thank you for watching.
Had to leave the video, here to learn about the motor cycle. Not here to hear distracting music
No problem, or you can turn the music off and enjoy the video, have a good day.
Good job guys, I enjoyed the video, workmanship and the music! I have the 2014 and it's the best bike I have owned. I should post a video.