Bought the left hand brace (Wbp lynx tactical) two weeks ago & already have on along with a new vortex venom. Excellent service CNC ! Waiting on my jcomp brake & I’ll be smokin some pots as Hickok 45 says. Great review !
OK I just got my cnc warrior brace , left side folder yesterday. I ordered it at noon Thursday. And got it noon Saturday. It's amazing piece of work. Rock solid. Now my micro draco is shootable again. Shout out to Tyler at CNC Warrior who helped me pick the correct model and hardware. Fit perfect took less than 4 mins to install. One bolt lockup. They are all caught up on their orders, no backlog now, if your item is in stock, Super fast. Very impressive cnc
Does the trunnion need to have a hole drilled through it? I'm thinking about getting the same brace for my mini but I've seen other videos where the installation seems like a pain in the ass.
@@RaugintasPienas mine has a flat trunion and a quick detach hole in center. One screw came with it, goes in the slot on the folding mechanism and then in the hole, put nut and tighten. Less than 3 minutes. I have a Century Arms Micro Draco RAS47
@@stripervince1 As in yours already had a hole in it when you bought it? I've got the Century Arms Mini Draco and it's got a flat trunnion too but no hole.
@@RaugintasPienas yes I must have some super upgraded version. My Micro has all kinds of goodies. Drilled qd rear trunion, notched safety for last round bolt hold open, front qd sling attachment, oversized paddle mag release, picatinny front rail with adjustable red/ green flourescent sights, full hood front sight, came with 2 metal 30 round last bolt hold open mags, never saw one with this many features
I have a question. The CNC brace comes with hardware. Basically a screw and a metal square nut? The screw goes into the gun from the back and the metal nut goes on the inside of the trunnion right?
@@clplusp8762 Ff you have the 1913 rail on the back you can select that version or you can even select the m70 which is just a bigger version of the pistol so it should work.
One thing to add though, I use the safety from Krebs that is meant for LH operation and it works great with my RH side folder for my AK lets me push the safety selector down with a slight bump from my index knuckle.
Excellent product. As advertised it's rock solid with no wobble. Mine was really tight and hard to fold but it fit perfectly and installed really easy.
Nice review Eddy. Thanks for taking the time to make it. I just bought a Romanian AK pistol and am in the market fir a collapsible stock. Because my Cugir built pistol came with a DLG Tactical quad fore end w/Picatinny top rail, if I elect to buy CNC Warriors stock you showed here, I would go w/ the left side folding option since I have no need to mount a left side rail for optics, although there is room on the left side of this receiver for the spare DA side rail and, I’ve always wanted one of Rob Ski’s Giatfucker Annihilatir Optics (AK Operators Union store) Again, thanks for your review of the CNC Warrior collapsible stock. You covered it thoroughly. That said, one of your commentors gave a top tip suggesting to wrap the brace top tube w/paracord to avoid your cheek touching hot or cold metal. Good show Eddy!
Be careful, I don't know if this is true or not but supposedly you're not allowed to modify the brace. And unfortunately, I don't know if there's a sure way to know with the amount of ambiguity surrounding braces.
Take back off, and slide shrink tube over the tubular part of the frame and heat up. End result looks the same, but doesn't get hot or cold. Kinda like adding a rubber coating.
@@shadowfoxcorp Actually maybe not, because mine came with a triangle side folding brace which I can't find for under $150 oddly enough. Does not seem like it should cost that much, however I feel that way about almost every brace I see.
I have a left side folder from bonesteel arms. Same brace. Had it for months but needed a drill bit to make it through the trunnion. Also a gun smith told me this was a stock and wouldn’t install it
If you're thinking of ordering one, they sale a jig to help you drill the needed hole. If you think you might need that, order at the same time to save on shipping. It is hard to find on their website...
I cannot figure out how to take the brace off , my 1913 rail came loose but I cannot take the actual brace off , I’ve loosened all the bolts and it still won’t slide off
MY303V8 I have a M92 as well with the standard arm brace. Looking for a folding brace for it. Did you get the right hand folding or left hand folding? I would prefer it to fold over to the left side away from the safety, bolt, and trigger so that it could be shot with the brace folded. Thanks.
Could you remove the roll pins holding the portion at the rear, then use shrink wrap on the upper tube to help keep your face off the cold or hot tube?
I was just looking at the Krebs Custom AK47SU and AK74SU pistols and this would perfectly complete the look. Now to decide on 7.62x39 or 5.45x39...Great review
why didnt you buy one that folded the other way there are options on site plus I have red dot mounted on top of weapon works fine just curious...good vid
CNC Warrior always brings quality. That PSA triangle brace could have been so much better. It just makes me sad how it turned out with that clunky Tapco looking block and the fact that its all polymer for the price. Really wish they would have made an aluminum one with a standard hinge to use with legit 100 series folding trunnions as well.
Indeed. We waited and waited on the PSA brace and I'm super let down. I went ace folder, 9" ar pistol tube (trimmed threads for legal lop) and tailhook mod 1 from gearhead works. Cost same as psa's bubba plastic range toy garbage. Totally want the cnc warrior in my collection for a 556 ak build. Looks are on point. Would complete a galil sar or ace pistol well.
Aesthetics are off scale Cool - I'd prefer old school wood, but that's ME. Round metal is a convenient place to carry emergency Para-Cord, so that's a PLUS. ... 😳
@@edd Do you know which one I need for a Pak9? I don't know which one to select from the drop down menu? It has to be the Stamped or Nak9 option, but I don't know which one to pick? There custom service never answers the phone.
Robert Carlos yes they still make them folding in either direction, just specify which one you’d like from the drop down box on their site when you order :) www.cncwarrior.com/AK-Saiga-Sidefolding-Armbrace-p/29380.htm
@@tacticalbob9884 wow. Thanks for the update. I haven't called. Still waiting since July 1st. Lol all i know is it better be nice AF. Should be the best money can buy its on par w/ cnc warrior. But u cant order shyt from CNC. It wont let me...
@@tacticalbob9884 Thanks & goodluck to you also. I will be honest if it wasn't for this long wait i would have ordered 3. I'm sure it's the same for many others. But when you have options that can be at your door in less than a week... lol. BONESTEEL COULD BE MAKING WAY MORE.
@@tacticalbob9884 That’s my real concern and is something holding me back from buying one. There’s definitely been a mix of people in the comments saying this is and isn’t legal. One person even said a gun smith refused to install it because it’s a stock. Granted, these are all just UA-cam comments, but it seems to be the general consensus of braces as a whole; confusion. And it doesn’t help that it would seem the ATF is gearing up for an incoming administration to start doing things like going after braces. So idk what to do. (Yeah Yeah, “don’t comply!” But is it really worth having a felony sitting around your house that you won’t be able to do anything with unless you live in a remote area where you can shoot from your backyard? Not for me at least).
Don't like that I can't shoot it folded if it's the RH variant. I really need to be able to bust caps on some fools when I bust a drive-by on that ass. What do you think of the left side variant for the SAM7K44?
Should have taken more time on the installation that was what I needed to see.cant really see the CNC warrior video... starting to think I've got the wrong parts ?
Great video and GORGEOUS little AK "pistol" you've got! I just picked up my plum color Palmetto AK-P yesterday and took her out today and shot 210 rounds through her. I put a Sig Romeo 5 on to and it was a dream to shoot. I've been eyeballing this brace since I ordered the gun but couldn't find any pictures that showed the butt pad area to see if it was something that wouldn't be horrible to shoulder. Thank you for giving a good view of it! Now I'm set that this is DEFINITELY the brace for me! I also LOVE the bulgy 4 piece flash hider! That's another soon to be item on my list. I'll be going with the left side fold though because I don't have a scope mount on my AK-P because it comes with the pic rail dust cover.
Subbed! Would this fit the kalashnikov usa komrad 12?? Looking for one of these style braces for it instead of the rubber sb one that came with it that isnt really holding up to the abuse of the komrad
Bought the left hand brace (Wbp lynx tactical) two weeks ago & already have on along with a new vortex venom. Excellent service CNC ! Waiting on my jcomp brake & I’ll be smokin some pots as Hickok 45 says. Great review !
with the left had one you bought dose it fold to the left or right of the gun?
@@nateridesabike left
@99z28 thank you
If you want to cover the bare metal look into paracord or EVA fishing rod grips. Works ok as a cheek rest.
OK I just got my cnc warrior brace , left side folder yesterday. I ordered it at noon Thursday. And got it noon Saturday. It's amazing piece of work. Rock solid. Now my micro draco is shootable again. Shout out to Tyler at CNC Warrior who helped me pick the correct model and hardware. Fit perfect took less than 4 mins to install. One bolt lockup. They are all caught up on their orders, no backlog now, if your item is in stock, Super fast. Very impressive cnc
Does the trunnion need to have a hole drilled through it? I'm thinking about getting the same brace for my mini but I've seen other videos where the installation seems like a pain in the ass.
@@RaugintasPienas mine has a flat trunion and a quick detach hole in center. One screw came with it, goes in the slot on the folding mechanism and then in the hole, put nut and tighten. Less than 3 minutes. I have a Century Arms Micro Draco RAS47
@@stripervince1 As in yours already had a hole in it when you bought it? I've got the Century Arms Mini Draco and it's got a flat trunnion too but no hole.
@@RaugintasPienas yes I must have some super upgraded version. My Micro has all kinds of goodies. Drilled qd rear trunion, notched safety for last round bolt hold open, front qd sling attachment, oversized paddle mag release, picatinny front rail with adjustable red/ green flourescent sights, full hood front sight, came with 2 metal 30 round last bolt hold open mags, never saw one with this many features
I have a question. The CNC brace comes with hardware. Basically a screw and a metal square nut? The screw goes into the gun from the back and the metal nut goes on the inside of the trunnion right?
They now have this available with the option to fold to the left side. That's the route I'm going for my M85 build.
Do you think the installation on my Pap m92 will be similar?
@@clplusp8762 Ff you have the 1913 rail on the back you can select that version or you can even select the m70 which is just a bigger version of the pistol so it should work.
One thing to add though, I use the safety from Krebs that is meant for LH operation and it works great with my RH side folder for my AK lets me push the safety selector down with a slight bump from my index knuckle.
Regarding the uncomfortable metal, perhaps wrapping it in paracord would do the trick?
Excellent product. As advertised it's rock solid with no wobble. Mine was really tight and hard to fold but it fit perfectly and installed really easy.
Gotta bump it downward with your hand firmly when its extended to disengage and fold
So the “left hand” option folds to the left?
@noirlens That is correct, mine is a right folding stock. You need to specify when ordering.
@@Executioner_of_Time thank you so much man. Went ahead and ordered mine. I think “left / right side folding” would have been easier to comprehend.
Nice review Eddy. Thanks for taking the time to make it. I just bought a Romanian AK pistol and am in the market fir a collapsible stock. Because my Cugir built pistol came with a DLG Tactical quad fore end w/Picatinny top rail, if I elect to buy CNC Warriors stock you showed here, I would go w/ the left side folding option since I have no need to mount a left side rail for optics, although there is room on the left side of this receiver for the spare DA side rail and, I’ve always wanted one of Rob Ski’s Giatfucker Annihilatir Optics (AK Operators Union store)
Again, thanks for your review of the CNC Warrior collapsible stock. You covered it thoroughly. That said, one of your commentors gave a top tip suggesting to wrap the brace top tube w/paracord to avoid your cheek touching hot or cold metal. Good show Eddy!
Be careful, I don't know if this is true or not but supposedly you're not allowed to modify the brace. And unfortunately, I don't know if there's a sure way to know with the amount of ambiguity surrounding braces.
LMFAO! Nice "brace"! Now I need to get another AK "pistol".
Congrats on the joining the Dark Side. I haven't been able to cure the "AK sickness" since I went down that rabbit hole...😂
5 AK’s later.....fuck
Bro look at your name 😂
@@SkateAndReview Glad you like it lol
Damn I want this pistol with this kind of setup. Cool video
2:57 you checked the chamber before removing mag? Could've chambered a round there mate
Thank you for the review. Couldn’t decide between this or the sb TF 1913. Looks like the cnc wins
Man you have good taste, Vepr, forged arsenal, and cnc warrior makes quality clean parts. Thanks for marking me aware of cnc warrior and arsenal!
Take back off, and slide shrink tube over the tubular part of the frame and heat up. End result looks the same, but doesn't get hot or cold. Kinda like adding a rubber coating.
Interesting you placed it right hand folding. The flipping of the brace in place was cool
Paracord will change your cold cheeks. Order it on Amazon.
So as a right handed individual would i be able to purchase the left handed brace so i could still use my ak while the brace is folded?
Just picked one of these up for my sam7k. Psyched!
PSA needs to use these on their pistols
That would immediately raise the price by $150-200 if this was used as OEM on a PSA.
@@shadowfoxcorp also very sure this is too borderline to a cnc warrior stock lol. i think that's why they've clung to sb tactical so hard.
@@shadowfoxcorp I'm sure they could work out a deal to get them for 100$
PSA needs to release their AKV in CA. Pleeeease
@@shadowfoxcorp Actually maybe not, because mine came with a triangle side folding brace which I can't find for under $150 oddly enough. Does not seem like it should cost that much, however I feel that way about almost every brace I see.
I just received mine and installed it. God damn this thing is solid. I love it!
I have a left side folder from bonesteel arms. Same brace. Had it for months but needed a drill bit to make it through the trunnion. Also a gun smith told me this was a stock and wouldn’t install it
That gunsmith is a idiot
Just shave down the top or the brace a couple mm and buy some aluminum blue for touch up then the charging handle will clear.
If you're thinking of ordering one, they sale a jig to help you drill the needed hole. If you think you might need that, order at the same time to save on shipping. It is hard to find on their website...
Does it atach to the picatinny rail on the back of the reciever?
I cannot figure out how to take the brace off , my 1913 rail came loose but I cannot take the actual brace off , I’ve loosened all the bolts and it still won’t slide off
Excellent stock, I have this on my M92 SBR. Excellent build quality.
MY303V8 I have a M92 as well with the standard arm brace. Looking for a folding brace for it. Did you get the right hand folding or left hand folding? I would prefer it to fold over to the left side away from the safety, bolt, and trigger so that it could be shot with the brace folded. Thanks.
JadXtreme Left, as you said to keep it away from the charging handle.
Was it hard to install? I plan on doing this with my m92
JFilms I had a gunsmith install it.
Could you remove the roll pins holding the portion at the rear, then use shrink wrap on the upper tube to help keep your face off the cold or hot tube?
I hate being 6'6. I can't get a comfortable hold. Going to have to sbr one
Being small ain’t that bad I’ve realized haha
I was just looking at the Krebs Custom AK47SU and AK74SU pistols and this would perfectly complete the look. Now to decide on 7.62x39 or 5.45x39...Great review
Both.
Is that the 8” or 9” length brace
Is there a video out there that shows you how to install this thing?
I love that muzzle device you have
I have a Century arms draco with a hole in the rear of the reciever. which mounting option do i chose?
why didnt you buy one that folded the other way there are options on site plus I have red dot mounted on top of weapon works fine just curious...good vid
Does this brace have a BATFE approval letter?
Thanks for the review! I’m going to pick one up.
Does it come with paper work saying it’s approved from atf? Shit looks a little way to much like a stock.
what do you call this kind of "tip" that goes in the ak barrel? this "thick" ?
how did you get the 4 piece flash hider to mount to the barrel? it is my understanding the sam7k isnt threaded under the factory device
Benjamin Day The newest version is.
What kind of muzzle device is that? I want that for m krink style AK
Bulganin four piece. $80 authentic or same price from CNC warrior. $20 for equivalent product on wish... don't tell the wrong people.
So if mine doesn’t have a hole for the stock, do I need to drill one ???
Great review, just subbed! Do you think this is the best brace on the market for this AK?
Is this available with the 1913picatinny attachment? That's what my Zastava zpap92 has for mounting.
CNC Warrior always brings quality. That PSA triangle brace could have been so much better. It just makes me sad how it turned out with that clunky Tapco looking block and the fact that its all polymer for the price. Really wish they would have made an aluminum one with a standard hinge to use with legit 100 series folding trunnions as well.
Indeed. We waited and waited on the PSA brace and I'm super let down. I went ace folder, 9" ar pistol tube (trimmed threads for legal lop) and tailhook mod 1 from gearhead works. Cost same as psa's bubba plastic range toy garbage.
Totally want the cnc warrior in my collection for a 556 ak build. Looks are on point. Would complete a galil sar or ace pistol well.
Where you get that shirt from
Does cnc make a warrior folder for the mini jack ak47 milled receiver ?
Hello there will this cnc warrior folding ak brace be a perfect fit on a palmetto ak 104
What's the difference between this and a folding stock ? Looks like the polish beryl folder?
Lol the Glock hardt shirt definitely went over most people’s heads 😂
Looks much better than the PSA brace, plus in a 5.45 I bet it recoils nice
Can you give me the website so I can buy one.
Where this gun made
The hinge AND mount is aluminum?
anybody know where you can get this type of dust cover from? with the iron sight in the rear.
Aesthetics are off scale Cool - I'd prefer old school wood, but that's ME.
Round metal is a convenient place to carry emergency Para-Cord, so that's a PLUS. ... 😳
Great review. Any update on how the hinge is holding up? Still a solid lock up?
Solid, but tbh I probably only shot 300 rounds through it
@@edd Do you know which one I need for a Pak9? I don't know which one to select from the drop down menu? It has to be the Stamped or Nak9 option, but I don't know which one to pick? There custom service never answers the phone.
What muzzle do u use
Great vid. Lol I am making an exact copy of your build after this video.
I've seen some pictures of these that fold to the left. Do you know where i can get that? Or are they discontinued? Thanks in advance.
Robert Carlos yes they still make them folding in either direction, just specify which one you’d like from the drop down box on their site when you order :)
www.cncwarrior.com/AK-Saiga-Sidefolding-Armbrace-p/29380.htm
Yes I got one a couple months ago that folds to the left and works great !
What AK is that ? Make ? Model?
What's better the CNC vs the SB tactical tf1913
Does this fit an hellpup?
You can always Wrap those tubular Stocks/brace.
Jose no any modification is illegal according to the ATF
So if I put Mcnett Camo Form Wrap, its illegal?
I guess I'm a Felon.
Jose Im not saying the law isnt stupid, but I believe yes that is the law.
@@andreahighsides7756
Guess I better remove the Wrap
Andrea Highsides wrong. You are behind the curve.
If you wanted to attach a sling to your AK pistol where and how would you attach it?
John Brock mine from bonesteel, same brace, had an option to to have a sling installed
what model is that?
A friend was about to buy the PSA brace. Now I know to tell him not to!
Will this work in c39v2?
Great review Eddy, does CNC make those that fold to the left?
I paid for one on july 1st. Still no email saying its almost ready or anything. Haven't called yet but they hit the 4 weeks mark and still nothing.
@@tacticalbob9884 wow. Thanks for the update. I haven't called. Still waiting since July 1st. Lol all i know is it better be nice AF. Should be the best money can buy its on par w/ cnc warrior. But u cant order shyt from CNC. It wont let me...
@@tacticalbob9884 Thanks & goodluck to you also. I will be honest if it wasn't for this long wait i would have ordered 3. I'm sure it's the same for many others. But when you have options that can be at your door in less than a week... lol. BONESTEEL COULD BE MAKING WAY MORE.
@@tacticalbob9884 currently running a romanian psl wood stock a magpul zhukov folder and a standard stained & poly coated wood stock.
@@tacticalbob9884 That’s my real concern and is something holding me back from buying one. There’s definitely been a mix of people in the comments saying this is and isn’t legal. One person even said a gun smith refused to install it because it’s a stock.
Granted, these are all just UA-cam comments, but it seems to be the general consensus of braces as a whole; confusion. And it doesn’t help that it would seem the ATF is gearing up for an incoming administration to start doing things like going after braces. So idk what to do. (Yeah Yeah, “don’t comply!” But is it really worth having a felony sitting around your house that you won’t be able to do anything with unless you live in a remote area where you can shoot from your backyard? Not for me at least).
Does attaching the brace change the legal status of the pistol?
Very detailed review highly appreciated!
Would this work on zpap92 pistol?
Yes
How much is that set up. Fung ar pistol , dont mike them
Can you link to exact brace specs - your link expired - thanks!
What model ak is that your using
Great honest review…. Thank you
Do an updated video on your sam7k
Ok!
I got this braces for my AK-V and love it however the range I got to try to say I need paperwork to have that. Why are they thinking that?
They’re just being assholes
They don’t know what you have. Just say “no I don’t it’s a brace” and stick with that.
Does this work for c39v2?
great video! wish I would have asked to shoot that bad boy! I love that brace I want it for my WBP LYNX but I dont know about mounting.
Same as me!?
So build quality and aesthetics is what you were going for, not really for portability, and ergonomics? :(
Will this set up work on a Draco nak9 ? Thanks
Do they make this with an option to fold to the left? That's my only hang up.
They do!
@@eddthe “left hand” option that is?
This looks way better than the psa brace and cheaper
Their web sight shows that you can order left side swing
Joe Collinsworth yes you can I have one and it works great. I can shoot with it folded perfectly
Don't like that I can't shoot it folded if it's the RH variant. I really need to be able to bust caps on some fools when I bust a drive-by on that ass. What do you think of the left side variant for the SAM7K44?
Should have taken more time on the installation that was what I needed to see.cant really see the CNC warrior video... starting to think I've got the wrong parts ?
Jack Penn i called before ordering mine just today great customer service from CNC warrior can’t wait to get it i got it to put it on a nak9
Can you use this without tax stamp
Yea it’s a brace not a stock so it makes this a pistol not a sbr
WILL IT FIT on a Arsenal 107r ??
What is the length of the brace itself??
Will this fit the polish Hellpup?
What 4 piece is that? Original Arsenal Bulgarian or one of the US remakes?
Griff his is the CNC. Buy the Bulgarian and it won’t change colors haha
@@AKking530 that's what I was trying to figure out 😂
Nice! Have you sold your palmetto St brace? I was looking for one due to less weight
Was wondering does it fall under a sbr or no
Can you switch it over so it won’t bother the trigger ?
You have to buy the left swinging model, like and sub!
I sure will one more question what hinge Base is that thanks
Great video and GORGEOUS little AK "pistol" you've got! I just picked up my plum color Palmetto AK-P yesterday and took her out today and shot 210 rounds through her. I put a Sig Romeo 5 on to and it was a dream to shoot. I've been eyeballing this brace since I ordered the gun but couldn't find any pictures that showed the butt pad area to see if it was something that wouldn't be horrible to shoulder. Thank you for giving a good view of it! Now I'm set that this is DEFINITELY the brace for me! I also LOVE the bulgy 4 piece flash hider! That's another soon to be item on my list. I'll be going with the left side fold though because I don't have a scope mount on my AK-P because it comes with the pic rail dust cover.
Subbed! Would this fit the kalashnikov usa komrad 12?? Looking for one of these style braces for it instead of the rubber sb one that came with it that isnt really holding up to the abuse of the komrad
Psssst....the upper foam rubber pad off some crutches fit on the back end of that brace. Just say'n. 😆
Did you have to cut off the pic rail on the SAM 7k? Or does it come off?
It unscrews real easy