Main products: sealing gasket,gland packing,PTFE/graphite/asbestos products, ceramic fiber products, high temperature heat insulation and fireproof material. Free technical support (sealing, heat preservation, heat insulation, fire prevention problems) All products 1 piece can also be customized, 30 years of service experience, fast and safe shipping anywhere.
I have a Fairbanks 12in valve for a pool, probably about 60 years old. I have no information on it other than what’s listed on the valve itself. Do you know of any resources I could use to help maintain it? I don’t think it’s ever been maintained, having a hell of a time getting the rusted bolts replaced on the flanges. Thanks!
Hello Mr. Kevin. Can you help me with an issue that had arrived at the place where I work. We have a 40000 liters capacity tank and gave valves of 8 NPS are provided at suction side of pump. The pump is located at bottom level of tank and there is a gland leak at the gate valve. There are no isolation valves provided. Can you help me that how can I solve this problem when the tank is full. Thank you in advance.
shaik ali try using a freeze seal. Wrap a coil of copper tubing upstream on the piping and downstream if needed, and run liquid nitrogen through it. After a little while the fluid inside the piping will freeze forming an ice plug. Then you can replace the packing without flooding the space. Its used in power plants of every kind when you dont want to shutdown the plant just because you can’t get a leg of piping isolated. Hope it helped.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
This guys has a accent that’s like a mix of every accent in the world. Great video very informative.
Clear, concise and expertly executed, thanks Kevin!
It is things like this, I wish I could get 6 months to a years worth of training on.
Good video.
Thank you.
Excellent video. Very clear, concise, professional, and full of great information. Great visuals and background. Thanks!
+Saad Haroon Thank you for your Kind comments. I endeavor to make the videos as concise and with as much information as is reasonably possible.
Great video.
I suggest using some wire or wire ties to secure the gland and bushing up out of the way while working.
crisp, clear and accurate. appreciate your efforts.
Very informative. Well shot video. Thank you for sharing your knowledge, sir.
Steven Fontas hi I have I have a wkm metal to metal get valve it have one pressure side do you have any video of clippings with something like that
Thanks so much!!! Great video and now I understand what a repack is!
Amazing Job A++++ I work in the oilfield and needed a refresher
Now i am ready to repack my O S & Y valves, thankyou!
Wow! Your help rounding the world
Outstanding tutorial. Thankyou!!!
Sir thank you so much this was so informative but can you show where the throat of stuffing box is that you mentioned?please
It's very Important video. Thanks sir..
Kevin, can you do a video on how to measure the packing size correctly?
A piece of tie wire is handy to hold the packing follower and flange up out of your way while removing and installing the packing.
Nice one kevin
This was excellent. Thanx
Main products: sealing gasket,gland packing,PTFE/graphite/asbestos products, ceramic fiber products, high temperature heat insulation and fireproof material.
Free technical support (sealing, heat preservation, heat insulation, fire prevention problems)
All products 1 piece can also be customized, 30 years of service experience, fast and safe shipping anywhere.
Very nice and informative!
Great job... Very interesting topic
bro good job
Hello.
Please, how to unstuck gate from DN150 gate valv?
I tring evaporust, but after 2 days still stuck.
I want to do without damaging the brase body
Is this somethig that can be done on a live valve.
What position should the valve be in if relevant?
Informative
What is the name of equipment through which packing is ejected
I have a Fairbanks 12in valve for a pool, probably about 60 years old. I have no information on it other than what’s listed on the valve itself. Do you know of any resources I could use to help maintain it?
I don’t think it’s ever been maintained, having a hell of a time getting the rusted bolts replaced on the flanges.
Thanks!
my advice is to buy another 12in valve with same bolt pattern and just replace it. but if it doesnt leak and it still works then dont replace it
Very thanks for sharing
At what angle should the Packing be cut??
Stem diameter- stuffing box diameter = diameter do seal ..
But why divide by 2 I don’t get it
What's the name of the tools for remove old gland pack?
Why not used a pin or magnet to hold the bracket ram from dropping down.
nice job
Thanks dude
Thanks
Hello Mr. Kevin. Can you help me with an issue that had arrived at the place where I work. We have a 40000 liters capacity tank and gave valves of 8 NPS are provided at suction side of pump. The pump is located at bottom level of tank and there is a gland leak at the gate valve. There are no isolation valves provided. Can you help me that how can I solve this problem when the tank is full.
Thank you in advance.
shaik ali try using a freeze seal. Wrap a coil of copper tubing upstream on the piping and downstream if needed, and run liquid nitrogen through it. After a little while the fluid inside the piping will freeze forming an ice plug. Then you can replace the packing without flooding the space. Its used in power plants of every kind when you dont want to shutdown the plant just because you can’t get a leg of piping isolated. Hope it helped.
Freeze it, rigid also makes a handy machine to do this but I’m sure there not cheap.
good
Thanks for the educative information
Nice
any chance you could type this up as i'm deaf, many thanks
thanks boss
Yikes! Fell asleep. If you play this back at 1.75 speed it's much better