Thank you for this video, it help me in getting WSJT-X an Log4OM working together. Now to get WSJT-X working good for making contacts. I was able to call CQ and people connects to me and the QSO completes. But I am not able to answer a CQ from others yet. I have a Icom 7300.
Great information, new to this mode and although I have setup working great with my FT-857D I can't have Log4om using Omnirig and likewise for the 857, the rigis fine until I transmit and once that happens I lose my wsjt-x config, in other words it states I need to configure my cat controller, I'm wondering if I'm getting RF into the rig.. Any suggestions would be appreciated as I would like to have log4om configured alongside wsjt-x and GT. Thanks for sharing your videos!
It's nice to hear from you and thank you for commenting. In my camper I use the 7300 and one USB cable for CAT. I don't connect Log4OM with OmniRig and just connect WSJT-X with the USB cable. So the only program controlling the rig is WSJT-X. You don't need Log4OM connected to the radio as everything we need is supplied by WSJT-X. I hope that makes sense. Your situation sounds like RF. Does the disconnect happen only on one band or on every band you operate on? What happens when you decrease power to 5 watts? GL 73 and good DX!
Thanks for the reply Rich, I finally sorted it, the FT-857D needs to be setup a little differently.. within WSJT-X I needed to change the OmniRig PTT method too VOX and the Mode and Split Operation to both None, this sorted the issue and I have all software running as it should, I'm also using the SignaLink just incase someone else with the same setup is having issues. Thank you for your help and again thanks for all your helpful videos they really are well done and easy to follow. 73 ZL1MY @@HamRadioAdventures
Great to hear from you and thanks for commenting. In WSJTX Settings, try "None" for Mode and then set the mode on the radio manually. That should work. 73 and good DX!
@@HamRadioAdventures Thank you so much. Will try that. So far I had to teach the radio so correct mode was in memory when I returned to each band. "The Boss" (FT-950) is getting a bit old so I don¨t expect too much from him :-). Tnx agn. Cu on the bands. 73...
General Question: why is it sometimes when you are working a station that station does not have a GridSpace? Sometimes i am about to hit “ok” when wsjt-x has the logging window up and there is no gridsquare.
Another great question. I have that happen sometimes and it's because they don't transmit the Grid. (They appear in a CQ). If you have lookup configured in the logbook. It should fill in the missing Grid. I hope this helps, vry 73!
I installed LOG4OM and getting everything working with my IC7300. When I switch my radio to “CW” the program produces a not transmitting “whine” on every frequency. The radio is not transmitting a carrier its just a whine. (Tone). I am stumped. When i switch to USB or any other mode it silences. I unplugged my key and nothing changes. Im stumped. It does it on all selections of input and output of the soundcard. Have to figure it out becsuse I really like LOG4Om.
I finally got Log4OM -2 going with WSJT-X and Gridtracker and JTAlert. I finished at 4am. The crazy thing about this awesome program is the manual is 239 pages and I have to admit I just scanned it, like a true ham lol. Log4OM, Omni-Rig and WSJT-X have to be “Run as Administrator” for Omni-Rig to actually share the frequency between Log4OM and WSJT-X. This drove me Bananas. I should have RTFM. 😆🤯. I took photos of the actual setup. I Will post them on my QRZ.
@@HamRadioAdventures I figured it out. With OmniRig and my 7300, if you select RTS/DTR keying selection in the OmniRig settings box with “High” instead of “Low” the radio sidetone is triggered when the CW mode on the 7300 is selected from USB-Data to CW. So I set both to “Low” in OmniRig settings screen and everything is normal now 🙌
Rich, did you have any problems with having HRD and Log4OM together on same PC? I have the license for paid version of HRD but use LOG4OM. Found out that HRD has put on the 9700 for the satellite tracking which I would like to use again 73 Phil G0BVD
Hi Philip, I haven’t used HRD very much lately so I couldn’t really say. I am out camping and using Log for the Old Man on my small laptop and it is working good. I like the Winkeyer on it because the small 💻 is a celeron and gets bogged down 🥺. Take care, be safe and best 73!
One more thing: how did you managed to force software to switch trx into USB-D. I have an ic7600 and when wsjtx is on log4om switches my 7600 into RTTY-R. Only way to get around it is to choose "none" in "mode" in wsjtx settings->radio.
sq5ebm that’s a great question. Yeah Icom 7610 and the 7300 have a DATA after the model in OmniRig. There isn’t one for the 7600 unfortunately. It is the OmniRig file doing that. 73!
@@HamRadioAdventures i keep it cool... i've just started to get my XYL used to the idea that 7610 is a good rig and i neeeeeeeeeed it sooooooo muuuuch, mom! ;-) ;-) So maybe soon.
I am trying out different Windows Logging Programs, like LOG4OM, HRD, and others. Each time I want to engage each program with WSJT-X and JTDX. Every time I have to change the Radio Tab settings in WSJT-X/JTDX, to correspond to that specific program. . Is there a way I can either load the FT8 software and select a “preconfigured” radio tab for each logging program? Or Can I download WSJTX/JTDX multiple times and name them differently and point to those specifically configured programs so i don’t have fiddle with all the settings. I am trying out different loggers a lot trying to help friends figure out what works best.
Great question. Look at Configuration in the WSJT-X menu. I have different Configurations. One for using "HRD" as the rig, one for using "DXLabSuite" as the rig and then one for using my CI-V cable and the Icom 7300 (or 7610) as the rig. Best 73!
After trying to configure Log4OM with WSJT-X today, I suddenly had HamLib Error messages when I started WSJT-X. Can't find the problem. Have you an idea, what it could be? Thanks for any hint.
Manfred Faeh thank you for commenting here and thank you for watching. That is usually a configuration problem in WSJTX on the radio tab. Check the COM port and the baud rate that you are using for the rig. 73!
you video does not actually show how to add wsjtx into LOG4OM. I follow your instructions and my LOG4OM 2 does not show the same info on your video. More than likely you installed it ahead of time and skipped a few steps. I will continue looking for a proper install video. !
Thank you for the video. I have one question. How do I set up for the grid square in log4om to be populated automatically? At the moment I'm populating the square myself. MM7PRJ
Paul Snape It’s nice to hear from you. For your grid square go into the program configuration and set up your station information. To pull their grid square from a source like QRz.com, stay in the program configuration and setup Info Providers. I hope this helps. Take care and best 73!
@@HamRadioAdventures thank you for the reply. I have done as you said but the grid square is still not being automatically generated. I am having to find it on qrz and manually fill it in. MM7PRJ
Hi Doc, thanks for commenting. I’m not familiar with the FT857 but if you put the radio in USB mode and in WSJT-X select none for “Mode” possibly it will work. Does it work without Log4OM and using the FT857 for the rig in WSJT-X?
@@HamRadioAdventures Thanks, Richard. Yes, the Yaesu FT857 works fine with WSJT-X FT8 using DIG mode on the radio, OmiRig Set to "FT857 with right com port" The problem is the comport conflict between the two programs, and setting the WSJT-X Radio settings to "OmniRig Rig 1" does not eliminate the conflict for me. So both programs work fine with the FT857, but not together. I did manage to get it to work by opening it up WSJT-X first (establish radio connection) then Log4OM2 (offline), and now I also have GridTracker working. I can get WSJT-X to send QSOs to Log4OM2. I am just curious why the "OmniRig Rig 1" setting does not work the way it does with your setup. Thanks again for Posting this video. It seemed like such an elegant solution. 73, KC9LIF.
![Дон ДОН, Алаудинов и СБЕЖАВШИЕ из под Курска ахматовцы 😁 [Пародия]](http://i.ytimg.com/vi/dEfCf5IK26Q/mqdefault.jpg)
Thank you, just getting back into Digital and this was the answer for right now with central logging and FT8
Thank you Greg and thank you for commenting here. I appreciate the input and I hope all is well where you are. 73!
Thanks Rich. Very informative - Just started with log4om
Many Thanks Rich, I like your presentation style, no bull just straight forward info :) 73 DE Lin M0TCF
Thank you for this video, it help me in getting WSJT-X an Log4OM working together. Now to get WSJT-X working good for making contacts. I was able to call CQ and people connects to me and the QSO completes. But I am not able to answer a CQ from others yet. I have a Icom 7300.
Thank you Sir so much! I was wondering how to make them work together! :)
Thank you for watching and thank you for commenting. That’s 73!
Saved my bacon ... again
helped me tonight , thank you 73
Thank you for letting me know. I appreciate your input. Take care and good DX!
I see some other comments seem to indicate the same issue....
Thank you for commenting!
Great information, new to this mode and although I have setup working great with my FT-857D I can't have Log4om using Omnirig and likewise for the 857, the rigis fine until I transmit and once that happens I lose my wsjt-x config, in other words it states I need to configure my cat controller, I'm wondering if I'm getting RF into the rig.. Any suggestions would be appreciated as I would like to have log4om configured alongside wsjt-x and GT. Thanks for sharing your videos!
It's nice to hear from you and thank you for commenting. In my camper I use the 7300 and one USB cable for CAT. I don't connect Log4OM with OmniRig and just connect WSJT-X with the USB cable. So the only program controlling the rig is WSJT-X. You don't need Log4OM connected to the radio as everything we need is supplied by WSJT-X. I hope that makes sense.
Your situation sounds like RF. Does the disconnect happen only on one band or on every band you operate on? What happens when you decrease power to 5 watts? GL 73 and good DX!
Thanks for the reply Rich, I finally sorted it, the FT-857D needs to be setup a little differently.. within WSJT-X I needed to change the OmniRig PTT method too VOX and the Mode and Split Operation to both None, this sorted the issue and I have all software running as it should, I'm also using the SignaLink just incase someone else with the same setup is having issues.
Thank you for your help and again thanks for all your helpful videos they really are well done and easy to follow.
73
ZL1MY
@@HamRadioAdventures
tnx. Great video. My FT-950 goes into rtty mode even following your method to the letter. My FT-991A works nwonderful. Is my 950 too old?
Great to hear from you and thanks for commenting. In WSJTX Settings, try "None" for Mode and then set the mode on the radio manually. That should work. 73 and good DX!
@@HamRadioAdventures Thank you so much. Will try that. So far I had to teach the radio so correct mode was in memory when I returned to each band. "The Boss" (FT-950) is getting a bit old so I don¨t expect too much from him :-). Tnx agn. Cu on the bands. 73...
General Question: why is it sometimes when you are working a station that station does not have a GridSpace? Sometimes i am about to hit “ok” when wsjt-x has the logging window up and there is no gridsquare.
Another great question. I have that happen sometimes and it's because they don't transmit the Grid. (They appear in a CQ). If you have lookup configured in the logbook. It should fill in the missing Grid. I hope this helps, vry 73!
I installed LOG4OM and getting everything working with my IC7300. When I switch my radio to “CW” the program produces a not transmitting “whine” on every frequency. The radio is not transmitting a carrier its just a whine. (Tone). I am stumped. When i switch to USB or any other mode it silences. I unplugged my key and nothing changes. Im stumped. It does it on all selections of input and output of the soundcard. Have to figure it out becsuse I really like LOG4Om.
I finally got Log4OM -2 going with WSJT-X and Gridtracker and JTAlert. I finished at 4am. The crazy thing about this awesome program is the manual is 239 pages and I have to admit I just scanned it, like a true ham lol. Log4OM, Omni-Rig and WSJT-X have to be “Run as Administrator” for Omni-Rig to actually share the frequency between Log4OM and WSJT-X. This drove me Bananas. I should have RTFM. 😆🤯. I took photos of the actual setup. I Will post them on my QRZ.
Is the tone the same as the CW hertz set? Maybe a 600Hz tone?
@@HamRadioAdventures I figured it out. With OmniRig and my 7300, if you select RTS/DTR keying selection in the OmniRig settings box with “High” instead of “Low” the radio sidetone is triggered when the CW mode on the 7300 is selected from USB-Data to CW. So I set both to “Low” in OmniRig settings screen and everything is normal now 🙌
@@user-ss6zt2mo1l RR that's it!
Rich, did you have any problems with having HRD and Log4OM together on same PC? I have the license for paid version of HRD but use LOG4OM. Found out that HRD has put on the 9700 for the satellite tracking which I would like to use again 73 Phil G0BVD
Hi Philip, I haven’t used HRD very much lately so I couldn’t really say. I am out camping and using Log for the Old Man on my small laptop and it is working good. I like the Winkeyer on it because the small 💻 is a celeron and gets bogged down 🥺. Take care, be safe and best 73!
One more thing: how did you managed to force software to switch trx into USB-D. I have an ic7600 and when wsjtx is on log4om switches my 7600 into RTTY-R. Only way to get around it is to choose "none" in "mode" in wsjtx settings->radio.
sq5ebm that’s a great question. Yeah Icom 7610 and the 7300 have a DATA after the model in OmniRig. There isn’t one for the 7600 unfortunately. It is the OmniRig file doing that. 73!
@@HamRadioAdventures i keep it cool... i've just started to get my XYL used to the idea that 7610 is a good rig and i neeeeeeeeeed it sooooooo muuuuch, mom! ;-) ;-) So maybe soon.
I am trying out different Windows Logging Programs, like LOG4OM, HRD, and others. Each time I want to engage each program with WSJT-X and JTDX. Every time I have to change the Radio Tab settings in WSJT-X/JTDX, to correspond to that specific program. . Is there a way I can either load the FT8 software and select a “preconfigured” radio tab for each logging program?
Or
Can I download WSJTX/JTDX multiple times and name them differently and point to those specifically configured programs so i don’t have fiddle with all the settings. I am trying out different loggers a lot trying to help friends figure out what works best.
Great question. Look at Configuration in the WSJT-X menu. I have different Configurations. One for using "HRD" as the rig, one for using "DXLabSuite" as the rig and then one for using my CI-V cable and the Icom 7300 (or 7610) as the rig. Best 73!
@@HamRadioAdventures Thanks !
After trying to configure Log4OM with WSJT-X today, I suddenly had HamLib Error messages when I started WSJT-X. Can't find the problem. Have you an idea, what it could be? Thanks for any hint.
Manfred Faeh thank you for commenting here and thank you for watching. That is usually a configuration problem in WSJTX on the radio tab. Check the COM port and the baud rate that you are using for the rig. 73!
Thank you for your advice. I checked all parameter. Reboot the PC. The error is gone, but honestly I can‘t tell what it was. ☹️
you video does not actually show how to add wsjtx into LOG4OM. I follow your instructions and my LOG4OM 2 does not show the same info on your video. More than likely you installed it ahead of time and skipped a few steps. I will continue looking for a proper install video. !
Easiest way is to use GridTracker. See k0pir.us/gridtracker-wsjt-x-and-log4om/
Thanks for this video. It really helped a lot to set this up as I am newly using Log4OM. vy73 de DL4DE
Thanks Axel! GL and good DX!
Thank you for the video. I have one question. How do I set up for the grid square in log4om to be populated automatically? At the moment I'm populating the square myself. MM7PRJ
Paul Snape It’s nice to hear from you. For your grid square go into the program configuration and set up your station information. To pull their grid square from a source like QRz.com, stay in the program configuration and setup Info Providers. I hope this helps. Take care and best 73!
@@HamRadioAdventures thank you for the reply. I have done as you said but the grid square is still not being automatically generated. I am having to find it on qrz and manually fill it in. MM7PRJ
Paul Snape When WSJTX prompts you to log the QSO it should have the grid square in there from the contact you made. OK?
Does not seem to work with FT857. There is not data setting for FT857. When I set OmniRig Rig 1 in WSJT-X I get Rig Control Error.
Hi Doc, thanks for commenting. I’m not familiar with the FT857 but if you put the radio in USB mode and in WSJT-X select none for “Mode” possibly it will work. Does it work without Log4OM and using the FT857 for the rig in WSJT-X?
@@HamRadioAdventures Thanks, Richard. Yes, the Yaesu FT857 works fine with WSJT-X FT8 using DIG mode on the radio, OmiRig Set to "FT857 with right com port" The problem is the comport conflict between the two programs, and setting the WSJT-X Radio settings to "OmniRig Rig 1" does not eliminate the conflict for me. So both programs work fine with the FT857, but not together. I did manage to get it to work by opening it up WSJT-X first (establish radio connection) then Log4OM2 (offline), and now I also have GridTracker working. I can get WSJT-X to send QSOs to Log4OM2. I am just curious why the "OmniRig Rig 1" setting does not work the way it does with your setup. Thanks again for Posting this video. It seemed like such an elegant solution. 73, KC9LIF.
Must see? A bit click baitey.