Toyota tundra/tacoma horn not working solution/fix/repair(Clock Spring)/ Air Bag connectors

Поділитися
Вставка
  • Опубліковано 18 жов 2024
  • Showed what you replace . You replace the part/ clock spring that I show in the beginning. Hope it helps, share, give a thumbs up! Leave comments/ questions will try to reply and give best response and answer. Full video coming soon on next install. Thanks for watching. Subscribe for more videos

КОМЕНТАРІ • 33

  • @thelastchance6113
    @thelastchance6113 3 роки тому +2

    Im super scared of the airbag but you seem to not have those fears. Thanks for the video

  • @hotrod4126
    @hotrod4126 5 років тому

    Hey I have a 96 Tacoma. When I press the horn I hear the relay clicking but no sound. I checked continuity through the horn and it was good. Hard wired it to the battery and it was good as well. The fuse is fine and I even swapped the fuse to be sure. I was just thinking that there was a simple contact switch. If the clock spring wasn’t good would it still send a signal to the relay? Thanks for your time!!

  • @FishingWithKa
    @FishingWithKa 6 років тому

    I got a 2003 tacoma from a family friend they have the clock spring part they bought and the horn doesn't work, cruise doesn't work, and airbag lights on. They said I needed the new clock spring in. I asked some guy in my town I found to fix it and he said if it were a clockspring the engine light would be on and it would start rough, I think he just tried to scam me because he wanted money from me to tell me that....
    I'm pretty sure it just needs the replacement clockspring put in right?

  • @williecooper11
    @williecooper11 6 років тому

    Hey man, can you please show me how to remove the steering wheel step by step (or explain to me) . My 2012 tundras horn is not working and I already checked the fuse so thats not the issue. Im guessing i have to replace the clock spring?? Id appreciate your help. Thanks in advance

    • @irockablobeye6525
      @irockablobeye6525  6 років тому

      Willie Botha hey you can check out my other video I will send you the link I did a full step by step video hope it helps

    • @irockablobeye6525
      @irockablobeye6525  6 років тому

      Willie Botha check it out this is the video. ua-cam.com/video/uNz5q6gVNY8/v-deo.html

    • @williecooper11
      @williecooper11 6 років тому

      Thanks man. Appreciate your time. Ill check it out

    • @irockablobeye6525
      @irockablobeye6525  6 років тому

      Willie Botha no problem anytime. Any questions I'm here to help. Dont forget to sub and support the channel 😁 I'm trying to reach 1k subs since youtube changed their policies 😑.

    • @williecooper11
      @williecooper11 6 років тому

      For sure! Could you just tell me how to safely remove the “airbag” section of the steering wheel? Thats my main concern. Your video just shows when you’ve already removed it... thanks allot bud

  • @irockablobeye6525
    @irockablobeye6525  7 років тому

    no problem hope it helped. will be uploading more how to videos and how to check every component of the horn system. or any other specific thing.

  • @ytmm9055
    @ytmm9055 7 років тому

    thanks

  • @Mogazilla
    @Mogazilla 6 років тому +2

    Could this he the problem for my horn only working when it wants to? I rigged up a cable to the horn itself and it works but the steering wheel wont make a sound only when it wants to

    • @irockablobeye6525
      @irockablobeye6525  6 років тому

      It could be this issue one thing to try is turn the steering wheel all the way to both sides while pressing the horn and if it works at a certain point that's one way of knowing.

    • @Mogazilla
      @Mogazilla 6 років тому

      And if the horn doesnt work when i do that what else could it be?

    • @irockablobeye6525
      @irockablobeye6525  6 років тому

      @@Mogazilla make sure no wires are loose on the horns itself. If you find no issues on the wiring and horn I would just replace the clock spring.

    • @irockablobeye6525
      @irockablobeye6525  6 років тому

      @@Mogazilla check out my full video of how I replace it if you dont know how to do it. Hope it helps you.

  • @indigenous31617
    @indigenous31617 2 роки тому

    So, you go to your truck and the steering wheel is already off? 😆

  • @dwightkellingtons5308
    @dwightkellingtons5308 5 років тому +1

    This video would have been more beneficial if you showed the full disassembly

    • @ronnie_5150
      @ronnie_5150 4 роки тому

      lol Exactly. I was like, "where's the first part?"

    • @JH-ni6uu
      @JH-ni6uu 2 роки тому

      Its simple

  • @brianwood1041
    @brianwood1041 Рік тому

    Where’s the first part

  • @thomaswright3104
    @thomaswright3104 Рік тому

    Thanks…but horrible lighting…

  • @Denisjknight
    @Denisjknight 6 років тому +1

    Maybe check the fuse first?

    • @irockablobeye6525
      @irockablobeye6525  6 років тому +3

      Dennis Knight hey yea I made another video. Explained more on what to do. I also showed more detail. Feel free to check it out. I made this expecting most to know it's not a fuse and are down to last solutions . Thanks appreciate the info. Helps me better explain and show on upcoming videos. Subscribe for more 👍

  • @behnammohajeri7047
    @behnammohajeri7047 Рік тому

    That is clockspring it not the horn what you are talking about

  • @irockablobeye6525
    @irockablobeye6525  6 років тому

    Anyone looking for a full video here is the link
    ua-cam.com/video/uNz5q6gVNY8/v-deo.html

  • @Thrust83
    @Thrust83 6 років тому

    No puller needed.

    • @irockablobeye6525
      @irockablobeye6525  6 років тому

      Christopher Nolen yea check out the full video on how I used it. I show everything I did to replace and remove everything

    • @irockablobeye6525
      @irockablobeye6525  6 років тому

      Christopher Nolen it's my most recent upload. Hope it helps you out.