Just subbed. This channel is amazing. I never could figure out why so many woodworkers buy these expensive tools when we can make anything we put our minds to. Youre awesome
Mr JSK......the way I see it is that on the day you were born....the Good Old God....did not have much to do....so he spent more time with you...giving you all these talents and most importantly he gave you patience.......which is a rare commodity
Beautiful and pleasant to watch. I like the cleanliness of your workshop and the close-to-perfection and elegance of your work. If there is one room for improvement that I can think of, there can be a switch placed at a more ergonomic position.
Precision: I am hard to achieve. JSK-koubou: Hold my beer. Seriously though, amazing and beautiful work, a true pleasure to observe. A master at work. 🙂
Excelente proyecto muy bien desarrollado y mejor ejecutado maestro,un vídeo muy largo para mí gusto, pero entretenido, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un merecido like desde Narón (Galicia)🔝👍🤓😜
Исполнено, как всегда, отлично! Но я бы на месте автора подумал бы трижды, перед тем как устанавливать наждачный диск такого большого диаметра на это маломощное точило (всего 125W). Мне кажется, двигатель будет перегружен и легко может сгореть. Двигатель в одном из предыдущих роликов автора гораздо лучше подходил на эту роль. А ещё автору повезло с такой идеальной фанерой, даже балансировать фанерный диск не пришлось.
Seu talento é fantástico. Eu estava com saudades dos seus vídeos, você é excelente no seu trabalho, tem idéias brilhantes, Parabéns! obrigado por sua dedicação!
I'm really surprised that you didn't use a belt/pulley system in order to lower the speed of disc. I've tried several sanding disc builds on bench grinders, and the grinders did not last long... until I made it offset and used a belt and pulleys to lower the speed.
@@carterscustomrods Thanks, that's hard to know, I don't know much about them. Ramon Valdez has a good dock for the belt sander that I made, he's got some great stuff on his channel.
na maioria o custo na fabricação fica maior que comprar uma ferramenta de marca boa , mas vale pela qualidade dos trabalhos que ele executa so não precisa colocar os dedos para tampar as medidas
Thanks a lot. Now I hope to see how you turn a grinder into a milling turner. I am very clumsy and I'm sure that without advice, I'll break the whole thing.
Hace años que veo tus videos y siempre has hecho un trabajo impecable! Estaba viendo la relación del diámetro del plato de lija y el motor del esmeril... No crees que deberia ser de al menos 1HP?
Venho acompanhando seus videos e fico maravilhado com os resultados dos seus trabalhos e quanta opção de ferramentas e quanto recurso, parabéns. Você compartilha de medidas desse projeto e de outros que você fez? Obrigado
Hice algo parecido con una amoladora de banco " le puse un disco con la intención de lijar" unas piezas de madera Pero no dio' resultado, la amoladora se calentó a los 20 minutos de trabajo ¡ que llegó a quemarse la pintura ¡¡ Pienso que por la experiencia que tuve no sirve ese tipo de máquinas Mejor usar motor de lavarropas, son más fuertes ¡ Ya tengo echas lijadoras con motor de lavarropas y andan de maravilla ¡ Saludos desde Uruguay
How do you manage to get these projects correct the first time? All of my projects take at least three prototypes before I'm happy with the fourth iteration.
If you like the video, please introduce it to your friends and social media !
💯
Your works and products are meticulously precise. 👍👏 It is nice to know that there are such specialists. 😊 Good luck to you. 😉
You are a skilled artisan. I always appreciate how you make things that are so intricate and useful.
Danke!
Талантливый человек талантлив во всём! Отличная работа!!!
Amazing, creative and perfect as usual
Well done!!!❤
Just subbed. This channel is amazing. I never could figure out why so many woodworkers buy these expensive tools when we can make anything we put our minds to. Youre awesome
I like your videos and your work is oustanding, and I like the way you don't act as if you are a performer showing their ego, like many others do
When Mrs Esthetic and Mr Functionality shake hands !
Once again a pleasure to watch!
Thank you 👌👌👌👍🏾
Kusursuz ve yaratıcı projelerin efendisi🙂👏🏻👏🏻🙏🏻🙋🏻♂️
Far beyond my current capabilities. Great idea and build!
Not only a brilliant artisan, he has single-handedly saved the threaded insert and double-sided tape industries from bankruptcy
That is a functional tool, built in a dream workshop! Thank you, Presenter-san.
Mr JSK......the way I see it is that on the day you were born....the Good Old God....did not have much to do....so he spent more time with you...giving you all these talents and most importantly he gave you patience.......which is a rare commodity
1ELE DEU TAMBEM UM BOCADO DE DINHEIRO PARA ELE COMPRAR TODOS ESSES EQUIPAMENTOS SOFISTICADOS
Beautiful and pleasant to watch. I like the cleanliness of your workshop and the close-to-perfection and elegance of your work. If there is one room for improvement that I can think of, there can be a switch placed at a more ergonomic position.
Очередной отличный Ваш проект. И как всегда безупречное исполнение. 👏👏
Português
@@AirtonJose-c1k Mais um grande projeto seu. E como sempre, execução impecável. 👏👏
You are a superbly talented woodworking Craftsman!
I am supremely impressed by this design and build project!
Well done, Sir!
Thank you or make making another video. Your wood working tools are amazing.
Geniale Arbeit und sehr sauber ausgeführt,Greetings from Germany
Amazing job !!! You are one of the best creative workers
Молодец! Хорошая работа! 👍
Real craftsmanship. Wonderful project
This is exactly what I want, thanks for sharing.
Excellent video and process. Thank you for sharing.
Молодцы!😮😅😊😊🎉❤
Precision: I am hard to achieve.
JSK-koubou: Hold my beer.
Seriously though, amazing and beautiful work, a true pleasure to observe. A master at work. 🙂
Super , gefällt mir👍
Ohne Worte und trotzdem verständlich , vielen Dank
Your projects are amazing !!
Excelente proyecto muy bien desarrollado y mejor ejecutado maestro,un vídeo muy largo para mí gusto, pero entretenido, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un merecido like desde Narón (Galicia)🔝👍🤓😜
Inspiring... your job is to the level of standard setting. While I enjoyed it watching on youtube the pleasure of doing it was your share for sure.
Encore une idée de Genie a vous prendre. Merci a vous
Que excelentes tus trabajos SOS UN CRACK
Vraiment excellent et tellement bien fait 👏👍
Исполнено, как всегда, отлично! Но я бы на месте автора подумал бы трижды, перед тем как устанавливать наждачный диск такого большого диаметра на это маломощное точило (всего 125W). Мне кажется, двигатель будет перегружен и легко может сгореть. Двигатель в одном из предыдущих роликов автора гораздо лучше подходил на эту роль. А ещё автору повезло с такой идеальной фанерой, даже балансировать фанерный диск не пришлось.
Sieht toll aus.. danke ❤
Sorry I forgot to say...well done Sir.....keep up the good work...hats off for you
Je ne retrouve pas "JSK Koubou" dans les dernières présentation et je reste sur ma faim !
Cómo siempre muy buenos tips, para nosotros los aprendices de carpintería, me encanta su trabajo
Great video thanks for sharing 😊 I watch you every day now
Muy buen trabajo. Te felicito 👏👏👍
बहुत ही सुन्दर ❤❤❤❤❤
Seu talento é fantástico. Eu estava com saudades dos seus vídeos, você é excelente no seu trabalho, tem idéias brilhantes, Parabéns! obrigado por sua dedicação!
Genial , como sempre 👏👏👏👏👏👏👍👍👍👍👍🙏🇧🇷
You should make an ornithopter build video for sure...!!! That will be a hit...
I'm really surprised that you didn't use a belt/pulley system in order to lower the speed of disc.
I've tried several sanding disc builds on bench grinders, and the grinders did not last long... until I made it offset and used a belt and pulleys to lower the speed.
Is it not possible with an electronic gizmo?
@waterboy8999 yes, but the cheap ones are really sketchy. The VFD would work, but pricey.
A single 2:1 pulley system will be perfect for disc sanding.
@@carterscustomrods
Thanks, that's hard to know, I don't know much about them.
Ramon Valdez has a good dock for the belt sander that I made, he's got some great stuff on his channel.
@@waterboy8999 thank you! I'm going to go check his channel now.
Alle deine tools sind super Klasse! 👍💪✌
Perfekt, bravo👍
Muy buena idea y muy buen trabajo, lo estaba esperando. Desde Buenos Aires, Argentina un saludo.Gracias.
Благодарю вас за все видео.очень полезно.
best tool
Outstanding job!
Imposible no quedar fascinado ante tanto profesionalismo.....me deleito con sus creaciones....guauuuuu ❤
na maioria o custo na fabricação fica maior que comprar uma ferramenta de marca boa , mas vale pela qualidade dos trabalhos que ele executa so não precisa colocar os dedos para tampar as medidas
Excelente. Gracias 😊
Disfruto cada uno de sus videos gracias por compartir saludos
Thanks a lot.
Now I hope to see how you turn a grinder into a milling turner.
I am very clumsy and I'm sure that without advice, I'll break the whole thing.
The coolest sound here is the remote 😅
Can you tell me how it is made or where you bought the handles shown in minute 16:50 minutes. And also in a minute 21:28.
Awesome video keep up the great work
素晴らしいですね....質問に答えられないのが残念.....
Subarashīdesu ne. ... Shitsumon ni kotae rarenai no ga zan'nen.....
leavel of creativity 🎉
Ótimo trabalho de máquina de marcenaria. Obrigado
Thank you very much Sir 🎉
Nice work.
Hace años que veo tus videos y siempre has hecho un trabajo impecable!
Estaba viendo la relación del diámetro del plato de lija y el motor del esmeril... No crees que deberia ser de al menos 1HP?
Venho acompanhando seus videos e fico maravilhado com os resultados dos seus trabalhos e quanta opção de ferramentas e quanto recurso, parabéns. Você compartilha de medidas desse projeto e de outros que você fez? Obrigado
Thx.You are the best.
What is the name of the adhesive tape you are using?
Шедевр!
Fantastic very good BRASIL
You're the Best!
Amazing!
Literally, I want to do this project this weekend. THank you a lot. I will add this video to my references to make my own idea.
Muito bom!!!!!
What can I say JSK, your incredible. Regards
Creative video, thanks :)
グリーンメタリックにJSKのロゴ、いいね。
Is this a chick doing this??? I'm impressed. Very nicely and neatly done. Subscribed.
Well made tool.
Уважаю твою аккуратность и умение, только вот смотреть тяжело, блин завидно, ты бы уж хотя бы разок накосячил что ли.😀🤭👍👏
Perfect job
Thank You!
great work
Hey that's nice! Could you turn a table grinder into a lathe? That would be very cool
Отличная работа
Булатеый лайк мой👍
So great!
Thank you
You have a link to that drillbit at 4:17 ? looks tapered?
This
amzn.to/42jw8Ub
Makes me want to be a Makita fanboy. ;)
Perfect!!!!
Hice algo parecido con una amoladora de banco " le puse un disco con la intención de lijar" unas piezas de madera
Pero no dio' resultado, la amoladora se calentó a los 20 minutos de trabajo ¡ que llegó a quemarse la pintura ¡¡
Pienso que por la experiencia que tuve no sirve ese tipo de máquinas
Mejor usar motor de lavarropas, son más fuertes ¡
Ya tengo echas lijadoras con motor de lavarropas y andan de maravilla ¡
Saludos desde Uruguay
Nice job
Hola soy un seguidor fiel de sus herramientas tas caseras desde donde usted hace esas herramientas que pais
Do you make prototypes before making your tools on video? Is it extensive planing and then to video?
Muito bom!
A nova maneira de divulgar vídeos anteriores ficou muito eficiente, parabéns!
Куда делось видео про изготовления очистителя воздуха в мастерской?
Well done.....
Was ist das für ein Bohrer, mit dem du bei 23:30 vorbohrst?
TOP of the TOP!!
Perfect, as always
25:10 What is that type of plastic called?
How do you manage to get these projects correct the first time? All of my projects take at least three prototypes before I'm happy with the fourth iteration.
Amazing !!!