DIY. Building New 3300mAh Li-ion Battery USB-C For Old BOSCH PSR 1440 Drill/Driver 2005

Поділитися
Вставка
  • Опубліковано 9 вер 2024
  • Hello guys. If you have old bosch drill driver like mine, you can build a new battery for your old drill driver. My bosch is 15 year's old and still working.Hope you enjoy this video and thanks for your support.
    Parts:
    Battery case PSR 1440: www.aliexpress...
    Li ion battery 3300mah 30A VTC7: www.aliexpress...
    4S 40A Li-ion Battery BMS: www.aliexpress...
    4S Type-C charger: www.aliexpress...
    Mini Spot Welder: www.aliexpress...

КОМЕНТАРІ • 20

  • @drtnazaryan
    @drtnazaryan 2 роки тому +1

    շատ ապրես 👍

  • @robert79513
    @robert79513 3 роки тому +6

    Great video. Could you make a video about this spot welder you are using?

  • @kevinalejandrocruzmedrano
    @kevinalejandrocruzmedrano 2 роки тому

    Great video. Happy New Year. Greetings from Mexico.

  • @MultiSteelking
    @MultiSteelking 2 роки тому +1

    Are you going to make a video how to make the spot welder you are using? Please :)

  • @fredericdeniaud3268
    @fredericdeniaud3268 2 роки тому

    Very nice video, but... i don't know which type/model/reference of blue LED you used...as a charging indicator)
    Why has it got 3 pins ? and how is it soldered/connected to the USB-C connector and to the charger circuit ?
    Thanks for the information

  • @70_T_N_70
    @70_T_N_70 3 роки тому

    Is that mini battery cell welding machine ok to use?

  • @RusWo
    @RusWo 3 роки тому

    Hi, which AWG do you use for spot welding and which one is on the accumulator (MOSEWORTH)?

  • @fayyazbahrami296
    @fayyazbahrami296 3 роки тому

    you have to use power cell with high discharge rate like 10 or 20 c this cel is like 1 or 2 it will be dead soon

    • @ARMTechHomemade
      @ARMTechHomemade  3 роки тому +1

      Don't worry this celles have 30A discharge rate, you have fake info about this celles.

  • @tylerbabinec8473
    @tylerbabinec8473 3 роки тому

    Hi! I have a question about your battery packs, I don't see any ways I can reach out for help but I figured I'd try here. I'm not sure what is wrong with mine but I'm quite sure I've done everything correctly.

    • @MicSokol
      @MicSokol 2 роки тому

      BMC board may not be good or batteries are not strong enough, some boards may require to double the batteries, 3s=6 batteries, 4s=8 batteries. If BMC not good don't leave batteries attached to it as it will ruin all of them. It happened to me.

  • @krcy0
    @krcy0 3 роки тому +1

    Where are u from

  • @buttgbuttbuttgbtt854
    @buttgbuttbuttgbtt854 3 роки тому

    Bhai ya sb kha se Mily ga

  • @Shadow_-be9nk
    @Shadow_-be9nk 3 роки тому

    mein akku 3s40A bms und sony vtc c4 (30A) aber nicht funktionert? Warum?

  • @hasanalitonyali
    @hasanalitonyali 10 днів тому

    The subject explained in the video footage from 7.45 to 9.20 minutes is very unsuccessful. You install LEDs, there is no explanation beforehand. In short, that part is a disappointment.😡😡