Bosch Cordless Drill Ni Cd to Li Ion Battery Conversion

Here you can see the products which i used in this video
High Drain Lithium LiitoKala HG2 18650 3000mah;
AliExpress s.click.aliexpress.com/e/DYGUf6ne
Amazon amzn.to/30tfmUp
BMS PCM Battery Protection Board
3S 12V
AliExpress; s.click.aliexpress.com/e/_Dl6...
Battery Spot Welder • DIY Battery Spot Welde...
Thanks for watching . And do not forget, Like and Subscribe
Due to factors beyond the control of BOSSY DIY, it can not guarantee against unauthorized modifications of this information or improper use of this information. BOSSY DIY assumes no liability for property damage or damage incurred as a result of any of the information contained in this video. BOSSY DIY recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of BOSSY DIY, no information contained in this video will create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from the improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not BOSSY DIY.

[@rikyharrison9335]

I've just recently 'stumbled on' this BOSSY DIY channel, possibly by divine guidance.. who can say? This is an inspirational content video from an 'electronic' who clearly knows what he's doing, someone who shows a high level of skill and knowledge in a specific area, and someone who can pass this clearly onto other interested parties. Well done !!! P.S. As Arnie would say.. " I'll be back !!! "

[@lukealaric7861]

Pro trick : watch series at flixzone. Been using it for watching all kinds of movies recently.

[@jeffersondane1554]

@Luke Alaric Yup, I have been watching on flixzone} for months myself =)

[@eleonor8416]

I just got a skil drill with dry batteries and i did the replacement for li ion 18650 from a old laptop battery and now works like a charm! In first hand i use bad batteries but in my second try works thanks ( forget my profile name, my doughter ismessing around my profile)

[@CMCdiy]

I'm glad I was able to help you.
Thank you for watching my videos

[@knicks252525]

How are you charging it. Will the original charger still work ?

[@lalnuntluangaralte4282]

Great idea and very good presentation..👍👍👍

[@davidf8749]

When putting the batteries in parallel using the nickel strip, it may be prudent to check they are at similar voltages. If one battery is at 2.9V and the other is at 4.2V then you are going to get current flowing from one to the other. The batteries could get rather warm while they both balance out to some mid-voltage.

[@peevee6786]

Can you still use the old charger for the new battery?

[@sevagj.b]

Is nice but I would like to ask you more about the BMS there are to many models, if you can make a video about the good ones and the specifications
Gratings

[@sccharles1]

Great video..! I would to change my battery ni-cd to li ion.. and still use old battery charge original bosch.. what kind bms I should use for it? Thx before and thx so much for answer my question..

[@alexkonstantinovskymd952]

Perfect. For 14.4 how many batteries to take?

[@ibrahemahmed9328]

Excellent, can convert Metabo drill with 4 pole to 2 wire Gnd and +

[@EMMADIY]

Great video!
I need to do that to my bosh drill battery .. 🙂👍

[@CMCdiy]

😉 thanks

[@027fuckoff]

Hey can you re use the original BMS ?

[@repairandrestoration4238]

I use BMS 3s30a v3.1

[@mr.m5978]

Nice, Like this project.
I'll try.

[@electronic7979]

Excellent project

[@CMCdiy]

Many thanks

[@allhadyouseen]

Hi thanks for the video, can you please tell me, are you able to use the original charger, or need to build a liion charger?? Thanks in advance!

[@benjy6358]

cannot use the original charger anymore..if u watch till the end, he did show how he charge it..

[@allhadyouseen]

@@benjy6358 i built my own modification since, and i use the original charger. Works fine for me.

[@serdarozmen1557]

Kendi şarj cihazı olmuyormuki, başka şarj kullandınız, sebebini açıklar mısınız, Teşekkürler 👍

[@user-2uf2kr2c]

Looks like you had some room at the front/back of the casing for the module

[@steffvatt]

What is the Charger??

[@kadirince]

Elinize sağlık...
Alttan değilde önden şarj soketi yerini açsaydınız daha görsel ve kullanışlı olurdu.

[@CMCdiy]

It is a good idea

[@electroniquepassion]

Merci 👍

[@1JemPot]

You did this a year ago with a much bigger BSM that used the ORIGINAL charger. I assume things have improved, as you've madethe same video, but with a much smaller BSM. However, it seems you need to use an external charger with this type?
QUESTION: Why can't you used the original charge with this updated version of this project - like you did a year ago? Thanks.

[@CMCdiy]

hi
I made this project for those who do not have the old charger.
here you can use any charger between 12-14V and minimum 1A

[@loveyourfreetimenow3270]

Great video!

[@CMCdiy]

Thanks!

[@titoluz1]

Boa tarde tenho uma BOSCH PSR 960 DE 9,6V que já não carrega. Agradecia a sua ajuda para calcular o tipo de baterias a usar. Tenho fotos, mas não dá para enviar por aqui. Cumprimentos

[@kidoskids2019]

sir you have tutorial for bosch 14 voltds how to replace battery to li on or li thium thnks

[@MARK.NAN69]

Sir, May I ask .. I want to change the 12v nicd cordless battery to a 12v li ion, so what is the appropriate value (ampere) for bms ??? 25a or 40a and so on ... Thanks sir...BOSCH GSR 12-1

[@stibis5713]

those drill won't go to 5 amp

[@mehmetknal4868]

Kaç para

[@tamirathobi9572]

👍🇹🇷

[@norynlaguertaramos3793]

7

[@georgehare2915]

crap unit gets siezed changing discharged battery eliminated

[@CMCdiy]

Thank you so much😊

[@joebroderi]

Save our ears and remove the frantic awful music, silence is better than that rubbish.