I totally feel your pain, as a mechanic and a shop owner myself for over 22 yrs, i wanted to start a yt channel addiction to truck mechanic ing, but seeing all the stupid and negative comments steers me away from doing filming. Watching from down under
Bro just do it people are always gonna bitch. As a tech myself I enjoy seeing content like will’s. Just do it if you like it and share what you know. Regards and looking forward to your channel🔧💪🏼
You should start it anyway worth the risk. Don’t listen to people on the internet. If we don’t know em, we don’t know what they know so no point in engaging with them :)
It’s instagram! I can’t even make a wholesome comment on there without it being deleted for being ‘spam’ ‘misleading’ or ‘baiting likes.’ But people can be absolute assholes without issue! 🤬 I’ve been finding YT much safer for my sanity when comment diving. 😊
Occasionally there'll be the one guy that's super knowledgeable about one specific car and they'll give good tips, but most of the time it's some dude who thinks he's a mechanic because he did a brake job on his own car once
Shout out to Concept3Performance and Will, amazing content. Keep it up, and don't worry about these keyboard warriors. They never really worked on a car or a truck before. For those of us who do, we find your videos informative and entertaining because we either learned something new or been in the same situation.
@cammourer8246 Communication is not the problem. It's the blasphemy that comes from people. I can't tell a surgeon how to operate just because I've stitched up a wound a few times. To the ball joint in question, Concept3Performance probably replaced hundreds, if not more, I can't tell them that they are doing it wrong just because I've replaced it on my car or truck. That would be assuming that every car or truck is built the same.
@@vsmk5512 I can see where you're confused, my opinion on his communication issues are gathered from previous videos where he admits to ignoring people, having people be his mouthpiece, and trying to explain things to people like they are also mechanics.
I love these keyboard mechanics that have never been under a car in their life. They can't even change oil and give advice about a ball joint. Great video, screw the haters.
Been doing toyota ball joints for 15 years now, some of the hardest even with a 50 ton press but the easiest way ive found is to prep the lower control arm with a flameless induction heater at the ball joint then transfer it to the press and press out its been pretty smooth so far. But Will you gots it its a bitch trust me!😂
Will i love your content keep it up ive learned so much just watching the content you make from a rust belt mechanic we all know the hell you went through to get that out thanks will keep the struggle real
The legendary trio battle music from gen 3 when removing the ball joint 😂. I love it, one of my top 3 songs from pokemon. Also some of these jobs that look easy as hell since theres no rust or you think its gonna be easy, isnt always going to play nice like this ball joint.
I feel your pain will. Had this issue a few years ago on a Tacoma. I never do lower ball joints on them anymore, i replace the entire arm lol. New arms comes with new balljoints already pressed in.
We work on semi trucks and most of the time anything you work on is very well rusted and seized. Usually half an hour or more if we have the time someone will spray a ton of CRC Freeze-Off and it does wonders! As far as all the penetrant sprays go we love this one the most.
oh man this reminds me of last year when It took my three days to get the ball joint on the upper control arm of my is300 out of the spindle - i ended up drilling through the stud and then hitting it with the air hammer for a long time. Can't imagine how much more difficult getting the actual joint out of the arm would be - good job friends and that's awesome you didn't charge extra
Man, props for putting up with everyone's BS. This job is hard enough without having to do it in the public eye. That said, my only gripe with your process here is the lack of safety glasses while using the press, but I'm probably just paranoid lol. Also, it's definitely not necessary, but if you do press jobs with any regularity, upgrading to an electrically operated hydraulic press makes these jobs a little more bearable.
Ok I love your videos and understand why your mad at keyboard warriors I’ve been doing it for 35 + years I just love to watch and unless I can give advice I’m just watching 🇦🇺
Everybody online is a master mechanic these days unfortunately. My motto will always be if it works then it works, don’t nit pick how other people do stuff because you might learn something new yourself. You do an outstanding job, I’m sure you’re teaching people a lot more than the other people talking about how you’re doing it wrong. Keep it up 🙌🏼
You were more patient than i would have been i would have liquid metal'ed the internals of the ball joint and used a die grinder to slot each side of the remaining ball joint till i could split it releasing it obviously you did it the more correct way and would also require you having a cutting torch and if you don't sol on that idea
This is why I am ordering Icon control arms w/ the upgraded Balljoints pre-installed - I feel the pain and I hate Balljoints for this exact reason (just like i hate Maxima hub bearing replacements).
So you think if you got new control arms and replaced those ones with the heavy duty bushings or will you run into the same problem honestly asking cause i have no clue
People on the internet are gonna be rude and ignorant, that's just how it is unfortunately. You just gotta learn to ignore them and not let it get to you. Also, I love your content, you guys are amazing.
Those ball joints are a bitch to get off on a good day. I just bought the whole lower control arm with ball joint. I know they cost more but it hate changing those things 😄
question, i bought a muffler and the extrender to attach to the muffler i didnt put it on it was my step dad but i look under my car and it was gone would it be cheaper to buy the pipes and muffler section in stead od buting the attachment again also im not a car guy could i also have tips on how to put things on the right way if i dont have the money for the muffler but the attachment to the pipe and muffler?
It funny, you can be a mechanic but still have zero mechanical compression. Just because you saw it done one way, one time, doesn't mean that's how every single version is done. These keyboard worriers trying to act like freshmen in a high school auto class.
I feel the pain. I work on bigger trucks with king pins. not ball joints, I just cut the whole front axle beam out to do it. you cant with that obviously. look a a hydraulic press its worth the safety side.
I saw the videos about how people buy their parts from the dealer for stupid prices. And that they should buy from the real manufacturer, and I have a question for Will : what manufacturer makes Nissan's OEM shocks and struts?
I am a mechanic for a fire dept. run into this some times with some of the cars and ambulances we get in. that's when I call Rosie over to play.... Rosie is Rosie Red. the oxy-acetylene torch, can't be stuck if its liquid.
Call it Will, love the straight up, tell it like it is for those who wrench.----- I have said for years, if the damn engineers would fix their own designs, they WOULD NOT design it that way - AND YES, EVEN the Dealership shop techs say the same thing.
Will, totally entertained with your content. Love the environment you have going in the shop. But bud, you have to admit the keyboard warriors are funny with "you should or that's wrong"
Some people really don't know what the hell they're talking about, they're calling themselves out for being youtube mechanics while real mechanics actually know what they're doing. Never listen to youtube comments ever. Let us call them out for you, don't need to waste your breath.
I totally feel your pain, as a mechanic and a shop owner myself for over 22 yrs, i wanted to start a yt channel addiction to truck mechanic ing, but seeing all the stupid and negative comments steers me away from doing filming. Watching from down under
well when youre trying to remove a ball joint the way its pressed in... youre kind of asking for it lmao
Bro just do it people are always gonna bitch. As a tech myself I enjoy seeing content like will’s. Just do it if you like it and share what you know. Regards and looking forward to your channel🔧💪🏼
It’s the internet, it is what it is. Will never change
You should start it anyway worth the risk. Don’t listen to people on the internet. If we don’t know em, we don’t know what they know so no point in engaging with them :)
@@nestorlopez6293 thanks i appreciate comments like this steer me in the right direction
Last Time on Concept Performance III. Everyone on Instagram was telling william how to do his job. Find out how he reacts now on todays episode 😆
It’s instagram! I can’t even make a wholesome comment on there without it being deleted for being ‘spam’ ‘misleading’ or ‘baiting likes.’ But people can be absolute assholes without issue! 🤬 I’ve been finding YT much safer for my sanity when comment diving. 😊
Occasionally there'll be the one guy that's super knowledgeable about one specific car and they'll give good tips, but most of the time it's some dude who thinks he's a mechanic because he did a brake job on his own car once
Toyota over-engineering at work. All mechanics have to deal with Engineers doing what Engineers do: make life harder on Mechanics.
Shout out to Concept3Performance and Will, amazing content. Keep it up, and don't worry about these keyboard warriors. They never really worked on a car or a truck before. For those of us who do, we find your videos informative and entertaining because we either learned something new or been in the same situation.
I work on them daily but I still say Will needs to work on his communication approach with some folks.
@cammourer8246 Communication is not the problem. It's the blasphemy that comes from people. I can't tell a surgeon how to operate just because I've stitched up a wound a few times. To the ball joint in question, Concept3Performance probably replaced hundreds, if not more, I can't tell them that they are doing it wrong just because I've replaced it on my car or truck. That would be assuming that every car or truck is built the same.
@@vsmk5512 I can see where you're confused, my opinion on his communication issues are gathered from previous videos where he admits to ignoring people, having people be his mouthpiece, and trying to explain things to people like they are also mechanics.
now thats a good dude!!! didnt charge extra !! i want him as my boss!!!
This is what every UA-cam mechanic should do to their key board warriors LOL...
I love these keyboard mechanics that have never been under a car in their life. They can't even change oil and give advice about a ball joint. Great video, screw the haters.
“Smithing increased” 😂 I love it , Skyrim edit
No joke Will is the main reason I subcribed and follow on social media funny and is someone you probably gain knowledge off when working
Same here.
Been doing toyota ball joints for 15 years now, some of the hardest even with a 50 ton press but the easiest way ive found is to prep the lower control arm with a flameless induction heater at the ball joint then transfer it to the press and press out its been pretty smooth so far. But Will you gots it its a bitch trust me!😂
Funny how people think they know so much but know so little. I like how you call them out it’s hilarious.
If the internet say you're doing it wrong, you're doing it wrong... remember, these are certified Instagram/UA-cam/Online mechanics!! 🤪🤣
Will is a Class Act, Good Dude!!
Love your content dudes!! Experience + comedy = good time!! Keep it up!!
Will i love your content keep it up ive learned so much just watching the content you make from a rust belt mechanic we all know the hell you went through to get that out thanks will keep the struggle real
The legendary trio battle music from gen 3 when removing the ball joint 😂. I love it, one of my top 3 songs from pokemon. Also some of these jobs that look easy as hell since theres no rust or you think its gonna be easy, isnt always going to play nice like this ball joint.
😂Pokémon background 🎶 is perfect for all these videos 🤣😂
i love when Will makes people look stupid on the inter😂
I feel your pain will. Had this issue a few years ago on a Tacoma. I never do lower ball joints on them anymore, i replace the entire arm lol. New arms comes with new balljoints already pressed in.
We work on semi trucks and most of the time anything you work on is very well rusted and seized. Usually half an hour or more if we have the time someone will spray a ton of CRC Freeze-Off and it does wonders! As far as all the penetrant sprays go we love this one the most.
This had me dying, keyboard mechanics are funny af.
Time to find all these “master mechanics” and talk sh*t to them 😂😂😂😂
Hard park and talk shit😂
Dissing haters with gen 3 elite four music in the background is absolute gold 😂🫡
I’m sure Will is more than willing to hire all the keyboard mechanics
I just have to say, I love you and everything you guys do ❤ 😂 thank you so much for the laughs
I love this video. This is why I'm subbed. Good job guys, on the content and the edit.
I’m on instagram and totally supported you bro half of them probably still living with mommy and daddy. Probably still in high school screw them
I love this episode! 😂😂😂😂 good job
Don't worry Will, shade tree mechanics always think they know something. Great content my man, keep up the good work.
This is why a lot of people say don't read the comments cuz of no good people like those 🤦🏾🤦🏾🤦🏾
You know it’s serious when they have to use the battle theme instead of the littleroot town theme.
Damn trollers!!! You let them win by giving them the light...screw them and keep on going sir... you are the real MVP...
Absolutely love the videos and big fan. I do have a question tho why dose your editor add pokemon background music ?
Damn man this needs to be a PSA. People say some dumb shit with a keyboard. Keep doing what you do Will. You are doing just fine.
lmaoo dude i love your channel and i love how real you are.. tell those stupid keyboard warriors
I think I just found my new favorite channel
oh man this reminds me of last year when It took my three days to get the ball joint on the upper control arm of my is300 out of the spindle - i ended up drilling through the stud and then hitting it with the air hammer for a long time. Can't imagine how much more difficult getting the actual joint out of the arm would be - good job friends and that's awesome you didn't charge extra
Man, props for putting up with everyone's BS. This job is hard enough without having to do it in the public eye.
That said, my only gripe with your process here is the lack of safety glasses while using the press, but I'm probably just paranoid lol. Also, it's definitely not necessary, but if you do press jobs with any regularity, upgrading to an electrically operated hydraulic press makes these jobs a little more bearable.
The boss battle music makes this video even better 🤣
Ok I love your videos and understand why your mad at keyboard warriors I’ve been doing it for 35 + years I just love to watch and unless I can give advice I’m just watching 🇦🇺
Thats why they're call Keyboard warriors
Bro!!! you alowed these dks to troll you....
cant wait for the next vid mate
This video was absolutely hilarious
It's funny before you said Toyota, I was like "That must be a Toyota balljoint 🤣🤣."
Everybody online is a master mechanic these days unfortunately. My motto will always be if it works then it works, don’t nit pick how other people do stuff because you might learn something new yourself. You do an outstanding job, I’m sure you’re teaching people a lot more than the other people talking about how you’re doing it wrong. Keep it up 🙌🏼
You were more patient than i would have been i would have liquid metal'ed the internals of the ball joint and used a die grinder to slot each side of the remaining ball joint till i could split it releasing it obviously you did it the more correct way and would also require you having a cutting torch and if you don't sol on that idea
Good job dude
This is why I am ordering Icon control arms w/ the upgraded Balljoints pre-installed - I feel the pain and I hate Balljoints for this exact reason (just like i hate Maxima hub bearing replacements).
So you think if you got new control arms and replaced those ones with the heavy duty bushings or will you run into the same problem honestly asking cause i have no clue
I know this is all hardened whatnots, but would it have been possible to drill straight down into the ball, to relieve some of the tension?
Which ball joint press broke if you don’t mind me asking?
People on the internet are gonna be rude and ignorant, that's just how it is unfortunately. You just gotta learn to ignore them and not let it get to you. Also, I love your content, you guys are amazing.
Bro I love the background music lol
I thought that was Bobby Lee, LOL!! I LOVE THE RAGE!!!
Those ball joints are a bitch to get off on a good day. I just bought the whole lower control arm with ball joint. I know they cost more but it hate changing those things 😄
question, i bought a muffler and the extrender to attach to the muffler i didnt put it on it was my step dad but i look under my car and it was gone would it be cheaper to buy the pipes and muffler section in stead od buting the attachment again also im not a car guy could i also have tips on how to put things on the right way if i dont have the money for the muffler but the attachment to the pipe and muffler?
How much to swap lower ball joints on a 2021 GX 460? 😅
It funny, you can be a mechanic but still have zero mechanical compression. Just because you saw it done one way, one time, doesn't mean that's how every single version is done. These keyboard worriers trying to act like freshmen in a high school auto class.
I agree with Will. I just buy the complete unit so I don’t have to fight those. Don’t like pressing them.
Yo. Who ever give Will this kick ass soundtrack deserve a raise.
Pokemon boss music makes it better for some reason.
Its the same type of ball joints on the tundras and i fought with mine for a week trying to replace them haha.
3am in the uk, got work at 8, you guys are great but i need sleep 😅
I feel the pain. I work on bigger trucks with king pins. not ball joints, I just cut the whole front axle beam out to do it. you cant with that obviously. look a a hydraulic press its worth the safety side.
Can i work with them seems like learning and fun
It’s even a struggle with the dual pivot press tool I use on super dutys’
I seen this on TikTok I had to come here to watch the full video 😂
Is there anyway you can make a video on how to fix a oil leak on a Honda civic 99 😩
You do a great job Will, The only thing is wear safety glasses at least. You never know when something can splash/splinter off.
Tundras are the same. I just ordered a new LCA with new ball joint in it because i ran into the same issue you did.
Well said.
Patience is a virtue
Hahah Mr Subaru been real quiet since this dropped
For my cars at home i save the extra money for the whole arm. Imagine doing this at home without all the shop tools
I saw the videos about how people buy their parts from the dealer for stupid prices. And that they should buy from the real manufacturer, and I have a question for Will : what manufacturer makes Nissan's OEM shocks and struts?
You can blame the engineers who came up with that way of a ball joint on the lower control arm.
the duck was working hard in this video. I now know a lot about ball joint removals.
Bro u have me rolling will do u bro I have buddies who watches u to learn how things get done
Did you try pissing on the ball joint so it can lubricate it out (tiktok mechanic)
If Hank Hill ever sold car parts, " I sell ball joints and ball joints accessories".
I am a mechanic for a fire dept. run into this some times with some of the cars and ambulances we get in. that's when I call Rosie over to play.... Rosie is Rosie Red. the oxy-acetylene torch, can't be stuck if its liquid.
Let me guess will it was a 3rd gen taco. I have a 1st gen tundra that suffers from that same lbj issue.
Talk that shit Will 🗣️🗣️😂
all of a sudden everyone on instagram is a certified ASE Mechanic
i thought i was the only one who face this kind of problem😅
A real macanic, how doesn't over charge when shit doesn't work out.
I like how Mr Subaru is taking shit lmao about not using the right tool
The video might be old but come across it today
Next time freeze it,i usually use hot ice aka the one used too keep ice cream frozen in the lil carts
I love this vid.🤣🤣🤣
I guess the keyboard warriors never played with the box where you put the shapes in
Call it Will, love the straight up, tell it like it is for those who wrench.----- I have said for years, if the damn engineers would fix their own designs, they WOULD NOT design it that way - AND YES, EVEN the Dealership shop techs say the same thing.
Dude, even as an engineer, I get mad at other engineers for making my car hard to work on by myself. It's bullshit
People are trying to do other people's job.While this guy knows what he's doing, Will is a professional.
lol comedy. This does make good content tho.
Will, totally entertained with your content. Love the environment you have going in the shop. But bud, you have to admit the keyboard warriors are funny with "you should or that's wrong"
Some people really don't know what the hell they're talking about, they're calling themselves out for being youtube mechanics while real mechanics actually know what they're doing. Never listen to youtube comments ever. Let us call them out for you, don't need to waste your breath.
i fckin love will he stands on business
That’s how Toyota gets you to buy the whole control arm?
Can't be a ball joint if it's liquid 😂
It's only weird if it doesn't work
At my shop we replace the entire A arm.
Yeah bro… u need a 22 ton press 🙄🙄🥱🤣