1993 DelSol SI Project: OEM proportion valve reassembly after rebuild

This is an unedited video that will be replaced at a later date with a better version. A fellow DelSol owner needed information that I discuss in the video. To offer the best help I am uploaded the raw version.
Disclaimer: I am a hobbyist not a professional. This is a DIY, I performed on my own car. I am not responsible for anything you do to your own vehicle.

[@SoaringRedEagle]

Thanks!!! I just saved $50..👍👍👍👍

[@loosh__sii]

how has it been after rebuilding? any leaks out of the 'weep plug? it seemed to me that maybe honda may have' them selves 'chisle cut' those bolts after assembly so as to have some protection for bolt vibration,maybe didnt think bolt locking fluid 'like lock-tite'wouldnt have been a good idea on brake system parts, and as for that second and center seal seemed to me also a bit of a specific sized and "shaped" seal the center one looked to be specifically flat in shape and the second donut seal seem to have been used for its outer flap/lip, i changed the seals out but still leaked,maybe ill try just spraying the oil seals with crc silicone/acetone lubricant and maybe just replacing the smallest seal and center seal only,🌊✌great video either way very detailed and visually high quality

[@redraif]

Thank you! Mine has held up since the repair, no issues or leaks. The replacements I opted for were definitely a cross your fingers & pray they work, but so far so good. I feel my only issue will be the fuel degrading the replacements as they are technically not the correct ones. But since I have gathered any I have found in the junkyards that have the honda rubber weep seal still intact & dry. They are on standby "if" I ever need them

[@Redghost091]

​@@redraif hey! I just saw this video, I can say that EPDM it's the best way to go, as I searched the forums everyone says that, also, I need to do this exact work on mine, and this video really helped! I would use larger bolts and put some nuts just to be sure they don't go anywhere

[@roychaves8794]

Los empaques q uso son para uso hidráulico o uso normal?