Thank you!!! I have an I7 14700K which I just incorporated into a new build. When I ran cinebench it was stuck at 99°C so I had to stop it before it was finished. Of all the tweaks you suggested in your video, I only made three. I disabled enhanced turbo. I changed the long duration power limit to 125 as you suggested. I initially changed the short duration power limit to 253 as you suggested but when running the cinebench it's still throttled up to 99 degrees albeit for a shorter time frame. Based on the TDP of my processor I decided to change it to 175. Now when running cinabench it peaks at 77°C and settles in at around 66°C. I'm not a gamer but I use DaVinci Resolve and when I stress tested it, the temperatures were 20° cooler. Again thanks for your help! Before these tweaks, I was thinking about returning the motherboard and processor.
i somehow managed to undervolt my 14700kf by 0.115 and its stable (havent had a crash yet). surprisingly enough, my performance has increased dramatically, while my room isnt an oven anymore
Honestly, amazing info. Thank you. Lowering my power limits by only a few watts cut my performance by only about 5% in Cinebench R23, but lowered my temps by 30c on my 13900k. Instead of thermal throttling at 99c, I'm now running about 60-65c but still scoring 34k in R23. I can't believe the difference in my case outputting heat either. The fans are no longer ramping way up in speed and my system is so quiet now! 🙏
Cheers mate:) For whatever reason the msi eufi cooler setting wasn't making any difference to high temps. So at first i had the long Duration power limit to 125 and the voltage offset to .085. I was getting temps down from 98 degrees to 65 degrees on full cpu load from Intel EXtu. I wanted a bit more oomph as I noticed the cpu frequency was taking a bit of a hit. So I jacked the long duration power limit upto 185 and pulled the undervoltage back to .080 and now the frequencies aren't affected and the temps are sitting around 83-86 which is absolutely fine by me! 100 degrees, (even though intel say its fine) just didn't feel right! Going to see how far I can push overclocking now! Thanks again:)
Da italiano ti dico che il tuo inglese è molto buono. Dalla prima parola che hai detto ho capito subito che eri italiano (perché parlerei al tuo stesso identico modo). Comunque grazie, il video mi è servito molto
I wanted to give it a couple of days to determine stability before commenting. Thank you very much for the guide. I’ve successfully under volted the CPU straight out of the box with your help.
Thanks, i managed to undervolt to -0.08 for now with my 14700F. At idle it sits on 30 degrees and the most it can reach is 70 degrees that's awesome for me. Sadly the PL1 is 65W after intel nerfed it but i'm being honest that's completely fine for everyday use, the only case scenario where it's nerfed is when i use all the cores and that's only on benchmarks or cpu rendering
@@alecs2244 Can you help me to fix my CPU? I mean I don't understand anything about it. Just tell me in caveman language what to do. Also I'm getting 25-26k score on the same CPU as yours.
Pareil pour moi , j'ai suivi ce tuto il y a 2 jours , donc je joue quelques jours et ci je n'ai pas de crash je passe a 0.115 pour voir , mais comme expliqué plus on sous volt , plus on est instable ... On a déjà beaucoup de chance d'être stable a 0.100 car au vu des commentaires c'est loin d'être le cas de tout le monde PS au début je voulais m'acheter un 7800x3d mais c'est 500€ et c'est très très cher pour un processeur , alors j'ai aucun regret d'avoir acheté pour 350€ mon 14700kf surtout quand je sais que j'ai eu de la chance avec ma puce 😉 bien évidemment le 7800x3D est mieux en jeux mais pour quelques fps mettre 150€ en plus ne vaut pas la peine pour mois
@ pareil j'ai préféré prendre une 14700kf et une bonne carte mère msi z790 carbone au lieu du prix abusif d'AMD. J'ai du baisser l'uv mais j'ai pû avoir 5.8ghz OC et avec des RAM 7200 mhz ça marche super 😉
@@TheMichaelparis Haaa d'accord tu a donc en même temps overclock et undervolt ton 14700k ? Ça peut être pas mal , a voir il faut que je teste cela aussi ... Et oui autant c'est le meilleur processeur 7800X3D pour le jeux mais il est tellement cher et pour 350€ le 14700kf fait très très bien l'affaire 😉
I have the i7 14700k with ASUS z790-A with BIOS Version 1802 of Microcode 0x12B Ever since I updated to this BIOS from the last: Version 1663 Intel Microcode 0x129 My 2 Fastest cores 5 and 6 which used to run at 5.6 GHz NOW run at 5.5 GHz and temperatures are the same or even worse. With Version 1663 MC 0x129 I had an offset of -0.125 and it ran during stress tests MAX 80s degrees, normally under gaming 72-78c and cores 5-6 still could hit 5.6 GHz rest 5.5 or 5.4GHz Now with version 1802 MC 0x12B without undervolt Battlefield 2042 which is CPU intensive and bad optimized hits 92 to 100c - I did the EXACT same undervolt offset -0.125 and it gives me BSoD. Cores 5-6 NEVER hit 5.6 GHz even in single thread or multi thread, seemed they were locked, but inside BIOS they still show they should run at 5.6 GHz So... I would not recommend updating, stick to MC 0x129 until a newer version, While writing this I just saw ASUS Released Version 1805 on 11/4 but descritption is just "1. Modify strings in BIOS settings - Guess ill give it a try and see if that improves anything. Ill report back once I get home and update it.
@@arma182my bios version was still 2023 year ago,, its running fine on 5.6ghz 0.1 offset.. but the temperature reaches 81c for a second is make me insecure about it...
Fonctionne parfaitement chez moi : Bios 0x12B CPU cooler par défaut Enhanced turbo désactiver 0.100 R23 stock : 32500k R23 undervolt : 35500k Température en jeux : parfaite ne dépasse pas 50°
It really owrked for my 14700K using Z790P. I tested rendering using Fusion360(CPU Intensive) and temperature hit 100 on all cores with a 3 fan AIO. After following these steps, it did not go above 70.
I use very expensive high-end aio and without undervolt the temperature (i7 14700k) is between 60-70 °C, gigabyte aorus waterforce x ii 360 but cpu usage is 15-20% aio usage is 70% but I plan to buy a stronger videocard 4070 ti super (my current graphics card is 3070 ti) and cpu usage probably will be more so I will undervolt but with another method because hyper threading is not advisable to turn off.
I tried this started with the -.05 undervolt my pc immediately crashed and is now stuck in a restart loop with no video out, resetting the cmos battery did not work and I have no clue what to do. I hate the 14700k so much I have had nothing but trouble with it since I bought it a year ago.
@@adlerhaaland3507 core i5 and higher intel 13th and 14th gen chips had a huge issue with crashing, longevity degradation, permanent CPU failures before that Sept BIOS update.
Can I use these settings and then bump up my cores to 59 or 60? Any tips or suggestions for pushing my Mhz higher while using your recommended undervolt settings? Thanks.
125W on the long duration power limit is too low. Sure, temps Max out at 70C, but it also tanks your performance. I recommend adjusting this until you hit 85C Max, which will likely be closer to 200W. That way you have a nice balance of performance vs temps.
i did run 150w and 0.1mv and end up got 71-72c current temp on Cinebench. but i played apex legends and got 71-81c... even though its only for a sec 81c but its sure make me insecure...😅 is there a way to make it cooler? i used pccooler rt620 as a cooling,, since i don't want liquid cooling so i choose to UV my cpu but the results wasn't meet my expectations. 😢
Je vais te donner le meilleur tips que personne ne t'a jamais donné même ci je sais d'avance que je n'aurai même pas un merci 😉 Pour réduire au maximum tes température tu vas faire comme moi , ne pas mettre de la pâte thermique mais mettre a la place du PTM7950 c'est un pad qui est similaire niveau résultats au métal liquide ! Et avec ceci mec mon 14700kf a stock sur ma z790 ne dépasse pas les 50° en jeux !!! Oui oui tu a bien entendu je t'assure que cela est vrai alors quand je vais undervolt mon 14700kf j'aurais encore moins de température... Voilà c'est cadeau pour Noël🎉 , surtout que le ptm7950 coûte même pas 10€ sur Aliexpress ( c'est le prix que j'ai payé ) et sa fonctionne du tonnerre ! Renseigne toi ci tu me crois pas , mais crois moi il n'y a pas mieux , pourtant personne ne partage cette astuce a part moi même comme on va être noël 😉 Bye @@ridhoyuki8630
Ahahaha I actually was missing the 14700K, but have already covered the 13700K and 14700F and the settings are VERY similar, so you probably watched one of those two :)
Soooo i updated the BIOS and now my " core offset voltage " cant be set at " - " ratio. What the hell? i7-14700kf here, before the update it worked fine.
could you pls help me with an i7 14700k with msi z790-s wifi ? my combo works better with the old bios wit the microcod 0x120 . i got like 90c afterr 10 min of cinebench r23. with the new 0x12b and defaut settings i got 100 c justa fter 5 sec .
u should put the caption " undervolt ur cpu 13, 14th to save ur cpu" . it will get ton of view. i folow ur undervolt i3 12, to my i5 12400f on msi h610. fps is the same temp is lower but the cenebenk drop 30% score. what dose that mean
Ahahahaha thanks for the input but I don’t like to clickbait, I like to keep it very specific :) But I’ll have a video about the crashing fix for 13th and 14th gen specifically
I have a video about the mCode issue with Intel coming out this Wednesday:) 0x129 is USELESS and I actually do not recommend you guys update to it. But if you do have the crashing issues I’ll tell you how to fix them Wednesday.
I have a question when I go into XTU, my cpu is constantly Current/edp throttling, ive increased PL1 to 253 and PL2, ICCmax is set at 280 and I feel like this is the reason Its current throttling. however the second I go over 280 ICCmax my PC will shutdown on stress testing, I have got a 14700KF, b660m-p chipset, would a new chipset motherboard be a solution to this?
@@CEsmond7 so I use intel extreme, I tried intel default and saw no difference in performance or temp. I use a msi mag 360 aio fwiw. Sorry this was a day late. Merry Christmas
So before watching this, I set my offset to -.100 and it legit bricked my pc to the point it wouldn’t even power my screen or devices. Is that pretty standard? I legit had to hit some button on my mobo that was “clear cmos” and it worked but it was sketchy
First time i tried this on my 14700K, now my GPU & CPU got synced, about 68c both in game 😂.. I set 0.050, what you think to try 0.060 or more, for now i lose only about 50 points in Cinebench 2024.
hii bro i did this in my 14700k and yes the voltage & temperature went down max 68 when using cinebench. thanks for this!! but in Premiere pro or editing video software the voltage spike to 1.52 sometimes & temperature goes to 88 sometimes only in editing video.
Hi guys, wanna ask, i have a CPU VR Voltage Limit option in my MSI B760 DDR5 Motherboard Bios, is this something we can play with to drop CPU Core voltage and the temparature heat ?
I've done the exact same settings on my mobo(Z790 tomahawk)couple of months ago + I've also down clocked to 5.1Ghz for more cooler and it consumes even less voltage 1.2v max. But I don't want to downclock. -0.050V is stable on 5.1Ghz but it sometimes failed in cinebench R23 5.2Ghz and in intel XTU it show message elec limit throttle but pass the 5min test(AVX2). What should I do? I want full 5.5ghz and don't want to cross 1.3v as it will degrade my cpu overtime. I wanted to keep this machine for years to come. I've spent a fortune to get this machine and Intel ruined it with voltage issue.
none of these bios updates do anything for your K processors per Asus "The new BIOS includes Intel microcode 0x129 and adjusts the factory default settings for the non-K processors, enhancing the stability of Intel Core 13th and 14th gen desktop processors." that is legal speak for your on your own there is no default setting for K processors
I have corasir dominator 5200mhz My cpu is 14700 kf My motherboard msi pro z790-s wifi But when i enter to the bios I hasn’t xmp choice i have iexpo only What’s the problem??
Il y a 2 type de ram camarade 😉 Celle compatible Intel : XMP Celle compatible AMD : EXPO Certaines ram sont compatibles sur les 2 plateforme , pour la tienne j'en est aucune idée , de toute façon essaie d'activé ton profil EXPO puis ci il s'active c'est bon , c'est exactement la même chose que XMP comme je t'ai expliqué plus haut...
fınally msı agaın... intel serıes are wıth msı motherboard.. ı have ryzen 7 7800x3d on msı b650 s pro wifi.. now you dıdnot even set any "curved optımızer or precısıon boost overdrıve menu ,or thermal lımıt etc? whıch one we should set bro ı am so confused?
Undervolting my 14700k causes games to crash. Even if I do as little as -.010. Besides that I have no instability issues but my cpu temp is 100c on demanding games and 85+ on most others.
it's the same. i have kf, unlocked cpu, but locked motherboard, still works great. you have to try your sweet spot with under volting if you don't crash you can keep going.
I use very expensive high-end aio and without undervolt the temperature (i7 14700k) is between 60-70 °C, gigabyte aorus waterforce x ii 360 but cpu usage is 15-20% aio usage is 70% but I plan to buy a stronger videocard 4070 ti super (my current graphics card is 3070 ti) and cpu usage probably will be more so I will undervolt but with another method because hyper threading is not advisable to turn off.
Idk what's wrong with my pc, i have 14700k and z790 msi mobo, i use short limit 125, disabled enhanced turbo, undervolt by -0.050V and yet when i play gta V it gets me 95 degrees. I have 240mm aio cooler and maxed out the speeds. Ughhhhh what's wrong?? Even my bios is latest with the micro code 125
what kind of crashes do you experience? mine reboots mostly when opening heavy steam games and resulting to kernel power error 41, do you encounter the same crash/restarting issue?
why only on -0.05 ? go with -0.1 then go by 5 to -0.05 and every time stress test on multiple benchmarks.... also 253w wont matter on both pl1 and pl2... to be more precise the first thing you should do is LL AC/DC then ur -0.05 would have reason to be so low ... but anyway nice video and nice job :)
@@CodeNameTech MSI MAG Z790 Tomahawk WiFi. BIOS Revision 7D91vHB, micro code update to 0x123. All BIOS that came after with micro code 0x125/0x129 I've tested increase the core VID and Vcore resulting in high voltages(1.4v+) and increase temperatures. So I'm using the aforementioned BIOS which is very stable and it is set to CPU lite load to Auto (Mode 09). IA AC/DC load line to 0.4/1.1 mOhms(Shown in HWinfo 64) but when I change load line to Mode 12 and Mode 13 manually it changes the values to 0.7/1.1 & 0.8 mOhms respectively which also result more voltages and hence more heat. So in conclusion I'm on CPU load line Auto (Mode 09) plus core voltage offset to -0.040V and downclocked to 5.1Ghz p-cores/3.9Ghz e-cores. After this tweaking cinebench R23 stress test gave me 32400 pts which is only 2000 pts less than stock clock(5.5Ghz) and temperature decreased from 100°C to 85°C using DeepCool LE520 240mm AiO. Now tell me if I'm missing anything?
bro can u help me, im having problems with my new pc ryzen 7 7700 rx 7700xt 32 ram 6400mhz cl 32 In starfield 1080p ultra native (atlantis) im only getting 50/55 fps} And for some reason pc will randomly turn off, i had to low the ram to 6200 bc of this
I have I9 13900kf and asus rog strix z790-a, I update my bios (microcode 0x125 to ensure eTVB operates within Intel specifications), I usually use my pc in high load (temperature around 75-80c). If give me all bois settings to stop cpu degrading completely (l don't care about speed to much, just need long lifespend low temperature) it would help me a lot, thank for your time
Plan B: Sell the bad PC and all the Intel stock you have to some fool who has no PC tech or stock knowledge. Make sure to use a burner phone and a bad address.
@@ImWateringPSUs I am confused because there are parts of the other video that contradict this video. My 14700f is curently set to 65w but you want me to undervolt to adjust the wattage to 125? I dont understand how that is an undervolt.
What do you think if on top of this cpu light load mode is lowered as well? Msi 760b 14700k cpu. Did as you said in the video, offset to 0.075 - cinebench and occt tests max to 100C, 4000 mhz in a few seconds, had to stop the test. Tried to set cpu light load from 16 to 6. Result is 72C top and around 5200mhz, 1.24V in both tests. Will try to go a few steps around mode 6 to see more results
I tested on my Z790 the very stable is Mode 9(which is by default). Mode 16 will increase voltage. Below Mode 9 it will crash in cinebench and during XTU AVX2 test will fail. Stay on mode 9.
@@gameotic1Just trying to figure out whether cpu light load modes can be used on their own without setting cpu voltage mode to offset? Essentially does light load mode override any other voltage settings that you do under cpu voltage mode?
@@SirBebeOso according to my experience it doesn't override. It works side by side for example, Mine is set to "Mode 9" and if I undervolt more than 0.050V and it will not complete the Cinebench R23(1 run) and give me error but no BSOD then I restart the aforementioned app and test it again. However if it is set to "Mode 16" then you have more headroom for undervolting but monitor software will only show the values that you have manually set and will not show any undervolting value if only mode is selected.
UA-camr asking for a class action on himself ! Over or underlocking without the intel patch is like tosting your cpu as a marshmallow, and you just f e d the class action on intel !
Tu n'as pas tort mais le 7800X3D coûte environ 500$ ce qui est super cher pour un processeur de la génération 7 Le 14700kf coûte environ 350$ pour une minime différence en jeux au niveau des fps ... Alors mon choix était vite réfléchi ! Mais c'est clair que ci les 2 était au environ de 350$ je serais partie sur le 7800X3D ... Et je ne t'apprends rien et te disant que c'est la misère sociale et les gens ont de moins en moins d'argent , alors 150€ de différence pour ci peu de performance en plus il n'y a pas photo 😉
🤣 Mobo de wish alors c'est pas possible autrement , il indique bien que le tuto est fait sur une carte mère MSI , j'ai un modèle bien plus haut de gamme que celui de son tuto et j'ai exactement tout les paramètres qu'il cite , alors ci toi tu n'as rien de tous cela c'est que tu l'a acheté sur TEMU ou WISH ...
@7eave1 perhaps don't compare bios released on March and on August. Nearly half a year difference. Neither will you fix anything changing the settings on outdated bios.
In light of recent events, doing this might just save your CPU from dying
Thank you!!!
I have an I7 14700K which I just incorporated into a new build. When I ran cinebench it was stuck at 99°C so I had to stop it before it was finished.
Of all the tweaks you suggested in your video, I only made three. I disabled enhanced turbo. I changed the long duration power limit to 125 as you suggested. I initially changed the short duration power limit to 253 as you suggested but when running the cinebench it's still throttled up to 99 degrees albeit for a shorter time frame. Based on the TDP of my processor I decided to change it to 175. Now when running cinabench it peaks at 77°C and settles in at around 66°C. I'm not a gamer but I use DaVinci Resolve and when I stress tested it, the temperatures were 20° cooler.
Again thanks for your help! Before these tweaks, I was thinking about returning the motherboard and processor.
Hi, i just want to ask. do you change the 125 as suggested in the video to 175? also how did you come up with the 175 based on TDP? Thank you!
i somehow managed to undervolt my 14700kf by 0.115 and its stable (havent had a crash yet). surprisingly enough, my performance has increased dramatically, while my room isnt an oven anymore
das macht halt kein sinn digga xD das einzige was sein kann ist das du pl1 auf 120 watt eingestellt hast und nur 120watt in dein zimmer ausgibst.
Lol I can relate. The room temp without AC is really bad when I use PC.
Honestly, amazing info. Thank you. Lowering my power limits by only a few watts cut my performance by only about 5% in Cinebench R23, but lowered my temps by 30c on my 13900k. Instead of thermal throttling at 99c, I'm now running about 60-65c but still scoring 34k in R23. I can't believe the difference in my case outputting heat either. The fans are no longer ramping way up in speed and my system is so quiet now! 🙏
how many watts have you lowered? i have 14700kf and what would you recommend me change my power limit to?
Finally something on MSI MOBO
Every MB has differently named options
It's hard to find
yeah i can't find on asus xD
its so coocked on asus motherboards
Cheers mate:) For whatever reason the msi eufi cooler setting wasn't making any difference to high temps.
So at first i had the long Duration power limit to 125 and the voltage offset to .085.
I was getting temps down from 98 degrees to 65 degrees on full cpu load from Intel EXtu.
I wanted a bit more oomph as I noticed the cpu frequency was taking a bit of a hit.
So I jacked the long duration power limit upto 185 and pulled the undervoltage back to .080 and now the frequencies aren't affected and the temps are sitting around 83-86 which is absolutely fine by me!
100 degrees, (even though intel say its fine) just didn't feel right!
Going to see how far I can push overclocking now! Thanks again:)
Thanks a lot mate. Works fine with 0.075V offset on my MSI Z790. I'm happy. Many many thanks. Now I have 75°C instead of 95°C in game.
What is your pl1 and pl2 watt in bios ?
After undervolting my gpu from the instructions on this channel now its time for the cpu
btw liked and subscribed
Da italiano ti dico che il tuo inglese è molto buono. Dalla prima parola che hai detto ho capito subito che eri italiano (perché parlerei al tuo stesso identico modo). Comunque grazie, il video mi è servito molto
Dude! THANK YOU! I'm going to play around with the settings but this totally helped! Subscribed!
Been waiting for this video from you for so long! Ty
Thank you for this. Your channel is practical, and I really appreciate that.
I wanted to give it a couple of days to determine stability before commenting.
Thank you very much for the guide. I’ve successfully under volted the CPU straight out of the box with your help.
How is the things going on
Dropped 20C when benching. thanks 🤝
Thank you so much. So simple and easy to follow. Good job!!!
just undervolted my 14700k by 0.075 Volts. Perfomance increased by 3% in geekbench and 15% in cinebench r23. wow !
Thank you! This helped me a lot and you explained very well.
Thanks Brother. I undervolted my 14700k successfully ❤
Running a rtx 4070, i7 14700kf on a z690. Temperatures went down but lost about 20fps in COD. Exact same tweaks.
Because 125W is too low, it should be 253W. If you are having temp issues then maybe 200W.
Ya try 200w so u don't tank your fps. U might lose 5-7fps instead of 20 with 200 vs 125
everytime launched cyberpunk, cpu in 90+C. did this, now sits at 70-75C. huge
Thanks, i managed to undervolt to -0.08 for now with my 14700F. At idle it sits on 30 degrees and the most it can reach is 70 degrees that's awesome for me. Sadly the PL1 is 65W after intel nerfed it but i'm being honest that's completely fine for everyday use, the only case scenario where it's nerfed is when i use all the cores and that's only on benchmarks or cpu rendering
Why are you trying to tune a Non-K? The whole reason for buying the Non-K is to only care about tuning memory and nothing else.
i got my 14700k with adaptive offset -0.50mv PL1=125W PL2=253W - never exceeds 1.32v and runs CB23 under 80 degrees for a MT score of 35k+
hi can u help me my boars b760 plus tuf but i cant find this settings on my bios
You meant -50 mv? Because -0.50 mv means 0.00050 Volt
@@_kiaz_ yes, i guess you're right.
@@xausess you should look up DIGI+VRM or something like that
@@alecs2244 Can you help me to fix my CPU? I mean I don't understand anything about it. Just tell me in caveman language what to do. Also I'm getting 25-26k score on the same CPU as yours.
thanks for the tutorial mine running stable at 0.100 need to try more :)
Pareil pour moi , j'ai suivi ce tuto il y a 2 jours , donc je joue quelques jours et ci je n'ai pas de crash je passe a 0.115 pour voir , mais comme expliqué plus on sous volt , plus on est instable ...
On a déjà beaucoup de chance d'être stable a 0.100 car au vu des commentaires c'est loin d'être le cas de tout le monde
PS au début je voulais m'acheter un 7800x3d mais c'est 500€ et c'est très très cher pour un processeur , alors j'ai aucun regret d'avoir acheté pour 350€ mon 14700kf surtout quand je sais que j'ai eu de la chance avec ma puce 😉 bien évidemment le 7800x3D est mieux en jeux mais pour quelques fps mettre 150€ en plus ne vaut pas la peine pour mois
@ pareil j'ai préféré prendre une 14700kf et une bonne carte mère msi z790 carbone au lieu du prix abusif d'AMD. J'ai du baisser l'uv mais j'ai pû avoir 5.8ghz OC et avec des RAM 7200 mhz ça marche super 😉
@@TheMichaelparis
Haaa d'accord tu a donc en même temps overclock et undervolt ton 14700k ? Ça peut être pas mal , a voir il faut que je teste cela aussi ...
Et oui autant c'est le meilleur processeur 7800X3D pour le jeux mais il est tellement cher et pour 350€ le 14700kf fait très très bien l'affaire 😉
Very good Video! Thank you 😎
I just finished building my 14700k. Should I try this even after the micorcode 0x12B update ?
Same question.
I have the i7 14700k with ASUS z790-A with BIOS Version 1802 of Microcode 0x12B
Ever since I updated to this BIOS from the last: Version 1663 Intel Microcode 0x129
My 2 Fastest cores 5 and 6 which used to run at 5.6 GHz NOW run at 5.5 GHz and temperatures are the same or even worse.
With Version 1663 MC 0x129 I had an offset of -0.125 and it ran during stress tests MAX 80s degrees, normally under gaming 72-78c and cores 5-6 still could hit 5.6 GHz rest 5.5 or 5.4GHz
Now with version 1802 MC 0x12B without undervolt Battlefield 2042 which is CPU intensive and bad optimized hits 92 to 100c - I did the EXACT same undervolt offset -0.125 and it gives me BSoD. Cores 5-6 NEVER hit 5.6 GHz even in single thread or multi thread, seemed they were locked, but inside BIOS they still show they should run at 5.6 GHz
So... I would not recommend updating, stick to MC 0x129 until a newer version,
While writing this I just saw ASUS Released Version 1805 on 11/4 but descritption is just "1. Modify strings in BIOS settings - Guess ill give it a try and see if that improves anything. Ill report back once I get home and update it.
@@arma182my bios version was still 2023 year ago,, its running fine on 5.6ghz 0.1 offset..
but the temperature reaches 81c for a second is make me insecure about it...
Yes you should undervolt even after 012b
Fonctionne parfaitement chez moi :
Bios 0x12B
CPU cooler par défaut
Enhanced turbo désactiver
0.100
R23 stock : 32500k
R23 undervolt : 35500k
Température en jeux : parfaite ne dépasse pas 50°
It really owrked for my 14700K using Z790P. I tested rendering using Fusion360(CPU Intensive) and temperature hit 100 on all cores with a 3 fan AIO. After following these steps, it did not go above 70.
I use very expensive high-end aio and without undervolt the temperature (i7 14700k) is between 60-70 °C, gigabyte aorus waterforce x ii 360 but cpu usage is 15-20% aio usage is 70% but I plan to buy a stronger videocard 4070 ti super (my current graphics card is 3070 ti) and cpu usage probably will be more so I will undervolt but with another method because hyper threading is not advisable to turn off.
Can you re do this with an asus motherboard please?
I tried this started with the -.05 undervolt my pc immediately crashed and is now stuck in a restart loop with no video out, resetting the cmos battery did not work and I have no clue what to do. I hate the 14700k so much I have had nothing but trouble with it since I bought it a year ago.
Have you updated your BIOS since the big September 2024 update was released?
@ I have not, what does it do? I was able to get my pc to boot btw
@@adlerhaaland3507 core i5 and higher intel 13th and 14th gen chips had a huge issue with crashing, longevity degradation, permanent CPU failures before that Sept BIOS update.
THANKS YOU !
you the best much appreciated
Alhamfulliah, great. Thank you so much!
If i am gonna undervolt to use it cos it is too hot, then why i need to but i7 or even i9? Why not just buy i5 in the first place?
You aren't "underperforming," you are undervolting. Performance doesn't change with an undervolt. Definitely, if you want i5 performance, buy an i5.
Can I use these settings and then bump up my cores to 59 or 60? Any tips or suggestions for pushing my Mhz higher while using your recommended undervolt settings? Thanks.
I undervolted my 14700k to 1,4v maximum. It rarely goes over 80c with cinebench running on a 240mm corasir AIO cooler.
which mobo? i can't find the setting on my Asus strix z790 wifi 2 -.-
@@Untoldzero we have same motherboard, i want to undervolt using this z790 wifi 2
is this good for video editing ?? or just gaming ?
Thank you!
Can I do this for my 13700kf on msi board. Same info or?
Yes
125W on the long duration power limit is too low. Sure, temps Max out at 70C, but it also tanks your performance. I recommend adjusting this until you hit 85C Max, which will likely be closer to 200W. That way you have a nice balance of performance vs temps.
i did run 150w and 0.1mv and end up got 71-72c current temp on Cinebench.
but i played apex legends and got 71-81c... even though its only for a sec 81c but its sure make me insecure...😅
is there a way to make it cooler?
i used pccooler rt620 as a cooling,, since i don't want liquid cooling so i choose to UV my cpu but the results wasn't meet my expectations. 😢
@@ridhoyuki8630 81 is fine. You don't get throttling until 90-95. So anything below that is good.
Je vais te donner le meilleur tips que personne ne t'a jamais donné même ci je sais d'avance que je n'aurai même pas un merci 😉
Pour réduire au maximum tes température tu vas faire comme moi , ne pas mettre de la pâte thermique mais mettre a la place du PTM7950 c'est un pad qui est similaire niveau résultats au métal liquide ! Et avec ceci mec mon 14700kf a stock sur ma z790 ne dépasse pas les 50° en jeux !!!
Oui oui tu a bien entendu je t'assure que cela est vrai alors quand je vais undervolt mon 14700kf j'aurais encore moins de température... Voilà c'est cadeau pour Noël🎉 , surtout que le ptm7950 coûte même pas 10€ sur Aliexpress ( c'est le prix que j'ai payé ) et sa fonctionne du tonnerre ! Renseigne toi ci tu me crois pas , mais crois moi il n'y a pas mieux , pourtant personne ne partage cette astuce a part moi même comme on va être noël 😉
Bye @@ridhoyuki8630
Is this a reupload? I thought I used this video like a week ago to undervolt my i7 14700k.
Ahahaha I actually was missing the 14700K, but have already covered the 13700K and 14700F and the settings are VERY similar, so you probably watched one of those two :)
@@ImWateringPSUs Sweet, I appreciate the video.
Soooo i updated the BIOS and now my " core offset voltage " cant be set at " - " ratio. What the hell? i7-14700kf here, before the update it worked fine.
could you pls help me with an i7 14700k with msi z790-s wifi ?
my combo works better with the old bios wit the microcod 0x120 . i got like 90c afterr 10 min of cinebench r23.
with the new 0x12b and defaut settings i got 100 c justa fter 5 sec .
could u do for asus too? or give us the name of the settings? i can't find it
Would it be possible for you to show how to do this using Intel XTU?
u should put the caption " undervolt ur cpu 13, 14th to save ur cpu" . it will get ton of view. i folow ur undervolt i3 12, to my i5 12400f on msi h610. fps is the same temp is lower but the cenebenk drop 30% score. what dose that mean
Ahahahaha thanks for the input but I don’t like to clickbait, I like to keep it very specific :) But I’ll have a video about the crashing fix for 13th and 14th gen specifically
did you happen to update microcode 0x129?
I have a video about the mCode issue with Intel coming out this Wednesday:) 0x129 is USELESS and I actually do not recommend you guys update to it. But if you do have the crashing issues I’ll tell you how to fix them Wednesday.
@@ImWateringPSUs especially don't do it if you have an Asus motherboard the beta bios makes you lose 20% of the performance
@@mariobnc1995 Asus and 14900k - everthing fine. For me, the update is absolutely stable, the performance is the same.
What bios are you running ? 0.129 ??
Did you undervolt after the new micro code?
What about Lite Load (went from 9 to 16 with the BIOS update) and IA CEP?
I have a question when I go into XTU, my cpu is constantly Current/edp throttling, ive increased PL1 to 253 and PL2, ICCmax is set at 280 and I feel like this is the reason Its current throttling. however the second I go over 280 ICCmax my PC will shutdown on stress testing, I have got a 14700KF, b660m-p chipset, would a new chipset motherboard be a solution to this?
420 meters AIO?! I gotta see one of those!
Hmm cpu cooler tuning only shows intel default, Intel extreme or msi unlimited. Not sure what to pick
I noticed that as well. On the newest MSI bios they seemed to have changed it. What did you end up going with?
@CEsmond7 ill check bios tomorrow and let ya know.
@lookalikafish Thanks man I really appreciate it
@@CEsmond7 so I use intel extreme, I tried intel default and saw no difference in performance or temp. I use a msi mag 360 aio fwiw. Sorry this was a day late. Merry Christmas
@lookalikafish No need to apologize, I really appreciate it! Merry Christmas to you as well. I'll take a look on my bios. Thank you again!
So before watching this, I set my offset to -.100 and it legit bricked my pc to the point it wouldn’t even power my screen or devices. Is that pretty standard? I legit had to hit some button on my mobo that was “clear cmos” and it worked but it was sketchy
Where is the 13700K, i cant find it anywhere!
First time i tried this on my 14700K, now my GPU & CPU got synced, about 68c both in game 😂.. I set 0.050, what you think to try 0.060 or more, for now i lose only about 50 points in Cinebench 2024.
my asus motherboard is confusing. if its possible please make a video about that.
can you do this 14700k in asus rog strix motherboard?
mode 13 on CPU lite load is very high, however still good video
hii bro i did this in my 14700k and yes the voltage & temperature went down max 68 when using cinebench. thanks for this!!
but in Premiere pro or editing video software the voltage spike to 1.52 sometimes & temperature goes to 88 sometimes only in editing video.
How do I do this on an Asus board? I have a rog strix but I don't see a single one of these options in my bios...
It is, i have a rpg strix too, go in ai tweaker and open every tab until you found it
Does ai tweaker have the cooler option because I can't see that anywhere and that's the first step of this video.
@@A-a-ron187 ai tweaker - cpu power management(or something like that) there you can find it, i have asus rog strix motherboard
Hi guys, wanna ask, i have a CPU VR Voltage Limit option in my MSI B760 DDR5 Motherboard Bios, is this something we can play with to drop CPU Core voltage and the temparature heat ?
Guys, I really need some help with XMP Ram😢
While im turning it on, my computer started crashing in games etc
What should i do to fix that?
I've done the exact same settings on my mobo(Z790 tomahawk)couple of months ago + I've also down clocked to 5.1Ghz for more cooler and it consumes even less voltage 1.2v max. But I don't want to downclock. -0.050V is stable on 5.1Ghz but it sometimes failed in cinebench R23 5.2Ghz and in intel XTU it show message elec limit throttle but pass the 5min test(AVX2). What should I do? I want full 5.5ghz and don't want to cross 1.3v as it will degrade my cpu overtime. I wanted to keep this machine for years to come. I've spent a fortune to get this machine and Intel ruined it with voltage issue.
If I use aio water cooling what fan must I choice btw I use deepcool 360
Can undervolt a locked processor from bios?
none of these bios updates do anything for your K processors per Asus "The new BIOS includes Intel microcode 0x129 and adjusts the factory default settings for the non-K processors, enhancing the stability of Intel Core 13th and 14th gen desktop processors." that is legal speak for your on your own there is no default setting for K processors
please do undervolting for it again on gigabyte mb
I have corasir dominator 5200mhz
My cpu is 14700 kf
My motherboard msi pro z790-s wifi
But when i enter to the bios I hasn’t xmp choice i have iexpo only
What’s the problem??
Il y a 2 type de ram camarade 😉
Celle compatible Intel : XMP
Celle compatible AMD : EXPO
Certaines ram sont compatibles sur les 2 plateforme , pour la tienne j'en est aucune idée , de toute façon essaie d'activé ton profil EXPO puis ci il s'active c'est bon , c'est exactement la même chose que XMP comme je t'ai expliqué plus haut...
fınally msı agaın... intel serıes are wıth msı motherboard.. ı have ryzen 7 7800x3d on msı b650 s pro wifi.. now you dıdnot even set any "curved optımızer or precısıon boost overdrıve menu ,or thermal lımıt etc? whıch one we should set bro ı am so confused?
Undervolting my 14700k causes games to crash. Even if I do as little as -.010. Besides that I have no instability issues but my cpu temp is 100c on demanding games and 85+ on most others.
what happend with 13700k/KF undervolting video?????
it's the same. i have kf, unlocked cpu, but locked motherboard, still works great. you have to try your sweet spot with under volting if you don't crash you can keep going.
I use very expensive high-end aio and without undervolt the temperature (i7 14700k) is between 60-70 °C, gigabyte aorus waterforce x ii 360 but cpu usage is 15-20% aio usage is 70% but I plan to buy a stronger videocard 4070 ti super (my current graphics card is 3070 ti) and cpu usage probably will be more so I will undervolt but with another method because hyper threading is not advisable to turn off.
i need help for my Aorus motherboard pls :(
Can anyone explain it to me i got gigabyte z790 ud ax motherboard cant seem to find most of these settings
I can only do 0.055 undervolt but better than nothing.
Idk what's wrong with my pc, i have 14700k and z790 msi mobo, i use short limit 125, disabled enhanced turbo, undervolt by -0.050V and yet when i play gta V it gets me 95 degrees. I have 240mm aio cooler and maxed out the speeds. Ughhhhh what's wrong?? Even my bios is latest with the micro code 125
what kind of crashes do you experience? mine reboots mostly when opening heavy steam games and resulting to kernel power error 41, do you encounter the same crash/restarting issue?
@@JsinJzone hey bro i never mentioned crash, my pc runs hot thats all
you need a better aio.. i got a lian li 360 and i get 80 C in r23 and gaming 60C
I have a 14700k and z motherboard and it does not let me move cpu core voltage offset anyone knows why?
I found the answer i had to manually click square and type haha
why only on -0.05 ? go with -0.1 then go by 5 to -0.05 and every time stress test on multiple benchmarks.... also 253w wont matter on both pl1 and pl2... to be more precise the first thing you should do is LL AC/DC then ur -0.05 would have reason to be so low ... but anyway nice video and nice job :)
How can I tweak LL AC/DC load line?
@@gameotic1 what motherboard u have?
@@CodeNameTech MSI MAG Z790 Tomahawk WiFi. BIOS Revision 7D91vHB, micro code update to 0x123. All BIOS that came after with micro code 0x125/0x129 I've tested increase the core VID and Vcore resulting in high voltages(1.4v+) and increase temperatures. So I'm using the aforementioned BIOS which is very stable and it is set to CPU lite load to Auto (Mode 09). IA AC/DC load line to 0.4/1.1 mOhms(Shown in HWinfo 64) but when I change load line to Mode 12 and Mode 13 manually it changes the values to 0.7/1.1 & 0.8 mOhms respectively which also result more voltages and hence more heat. So in conclusion I'm on CPU load line Auto (Mode 09) plus core voltage offset to -0.040V and downclocked to 5.1Ghz p-cores/3.9Ghz e-cores. After this tweaking cinebench R23 stress test gave me 32400 pts which is only 2000 pts less than stock clock(5.5Ghz) and temperature decreased from 100°C to 85°C using DeepCool LE520 240mm AiO. Now tell me if I'm missing anything?
@@CodeNameTech MSI Z790 Tomahawk WiFi. BIOS version 7D91vHB.
Can someone explain what settings should I go for CPU lite load which in my case is on Auto (Mode 09). I've MSI MAG Z790 Tomahawk WiFi (DDR5).
bro can u help me, im having problems with my new pc
ryzen 7 7700
rx 7700xt
32 ram 6400mhz cl 32
In starfield 1080p ultra native (atlantis) im only getting 50/55 fps}
And for some reason pc will randomly turn off, i had to low the ram to 6200 bc of this
What's your powersupply
@@7eave1 xpg core reactor 850w plus gold
@@lixxor6 it could be either unstable ram or the PSU. Does it still happen even after lowering ram speed to 6200
@@7eave1 i lowered it to 6000 bc of instability, but the low fps in starfield are the same
@@lixxor6 what settings r u running in Starfield and what resolution
Bro win my heart finaly some my i7 is laggy in render 😢😢😢
I have I9 13900kf and asus rog strix z790-a, I update my bios (microcode 0x125 to ensure eTVB operates within Intel specifications), I usually use my pc in high load (temperature around 75-80c). If give me all bois settings to stop cpu degrading completely (l don't care about speed to much, just need long lifespend low temperature) it would help me a lot, thank for your time
Plan B: Sell the bad PC and all the Intel stock you have to some fool who has no PC tech or stock knowledge. Make sure to use a burner phone and a bad address.
Is this good for mitigating the current crashing issues with the 13th and 14th Intels?
Yes, but I also have a more in depth, dedicated video for it :)
@@ImWateringPSUs Thank you!
@@ImWateringPSUs I am confused because there are parts of the other video that contradict this video. My 14700f is curently set to 65w but you want me to undervolt to adjust the wattage to 125? I dont understand how that is an undervolt.
I have a 150 offset
I undervoltet tò 0.195 and its stable
will the new bios update have these settings as default?
What do you think if on top of this cpu light load mode is lowered as well?
Msi 760b 14700k cpu. Did as you said in the video, offset to 0.075 - cinebench and occt tests max to 100C, 4000 mhz in a few seconds, had to stop the test.
Tried to set cpu light load from 16 to 6. Result is 72C top and around 5200mhz, 1.24V in both tests. Will try to go a few steps around mode 6 to see more results
I tested on my Z790 the very stable is Mode 9(which is by default). Mode 16 will increase voltage. Below Mode 9 it will crash in cinebench and during XTU AVX2 test will fail. Stay on mode 9.
@@gameotic1Just trying to figure out whether cpu light load modes can be used on their own without setting cpu voltage mode to offset? Essentially does light load mode override any other voltage settings that you do under cpu voltage mode?
@@SirBebeOso according to my experience it doesn't override. It works side by side for example, Mine is set to "Mode 9" and if I undervolt more than 0.050V and it will not complete the Cinebench R23(1 run) and give me error but no BSOD then I restart the aforementioned app and test it again. However if it is set to "Mode 16" then you have more headroom for undervolting but monitor software will only show the values that you have manually set and will not show any undervolting value if only mode is selected.
@@gameotic1thanks mate, I'll try a few combinations then with offsetting in mind
UA-camr asking for a class action on himself ! Over or underlocking without the intel patch is like tosting your cpu as a marshmallow, and you just f e d the class action on intel !
Just buy 7800x3d for better FPS
i 7 14700k i better ram 7200
Tu n'as pas tort mais le 7800X3D coûte environ 500$ ce qui est super cher pour un processeur de la génération 7
Le 14700kf coûte environ 350$ pour une minime différence en jeux au niveau des fps ... Alors mon choix était vite réfléchi !
Mais c'est clair que ci les 2 était au environ de 350$ je serais partie sur le 7800X3D ...
Et je ne t'apprends rien et te disant que c'est la misère sociale et les gens ont de moins en moins d'argent , alors 150€ de différence pour ci peu de performance en plus il n'y a pas photo 😉
Don't have any of that shit on my mobo. Waste of time.
Cry harder lil baby
🤣 Mobo de wish alors c'est pas possible autrement , il indique bien que le tuto est fait sur une carte mère MSI , j'ai un modèle bien plus haut de gamme que celui de son tuto et j'ai exactement tout les paramètres qu'il cite , alors ci toi tu n'as rien de tous cela c'est que tu l'a acheté sur TEMU ou WISH ...
Perhaps update your bios. You are running on outdated version, the cpu is gonna get cooked
The bios update also won't fix the issue.
@7eave1 perhaps don't compare bios released on March and on August. Nearly half a year difference. Neither will you fix anything changing the settings on outdated bios.
@@kristis3755 the August bios also won't fix anything unless the boost clock is lowered, which something intel can't do legally
@7eave1 nor will the outdated ones with less features without microcode update
@@kristis3755this is false