Just an update.since my last comment: I still have my electric ratchet, and it still works, the batteries(2) still charge and work. This ratchet goes hard! I have dropped it at times, it has sat in the cold over the last 3 Utah winters, and it still works like it did the first day. There have been times I've have used this as a breaker bar on some bolts that are torqued down pass the specs of this ratchet, and the ball bearings inside the ratchet didn't break or bust out. I am thankful for this ratchet, and thank you again for your video review.
Got this type on Aliexpress after seeing this review, thanks! $30 with two batts, charger, and metric sockets. The torque is just right for my job (factory maintenance) where I won't break small bolts or strip out allen heads. It breaks 3/8-16 bolts (~25ft-lbs spec) loose no problem, and 1/2-13 (~41ft-lbs) with a little bit of help. I just use it and then put it back in my tool cart, so it should at least last until I give it a solid drop from a ladder.
I got this but the two battery packs that came with it don't charge up. I checked the plug in charger with a voltmeter and it looks fine. But.. the two battery packs just won't charge?
I hear you but these for some reason wont die haha almost 2 years use and still going strong only thing is battery tabs broke on the batterys so sometimes they fall out but its bwwn heavily used if your a diy this likely wont happen its been dropped 100+ times
Well it already comes with 2 batteries, not sure why more would be needed. In my experience with this specific ratchet from eBay, each battery last about 4 hours if continually used. Extra batteries are available on eBay as well.
In all honesty i dont buy even my Milwaukee ratchets for breaking bolts at really any ft lbs. I use the impact for that. Ive noticed with my milwaukee ratchets i break the bolt free via miscle then run it out or the nut off with the electric part. For the money, this doesnt look like all that bad of a small repairs type tool at all.
Salut tous le mondes je l ai acheté je l ai utilisé puis au fure a musure j ai eu batterie hs , chargeur hs , mauvais contact de batterie dans le cliquet les lamelles de contact a l intérieur de du cliquet se tordre je l ai renvoyé à Amazon condeil ne l achètai pas vous allez le regretter
I've had my ratchet (same as in video) for 3 years, and I've used it as a breaker bar from time to time to get over torqued bolts, and it seem to break bolts with no issue, and there's no damage to the bearings inside the ratchet. Not saying this is recommended, but if you feel you can loosen it right then and there, then give it a try.
I just got mine in the mail today, and worked it a bit today. It's nice to not spend 3 minutes on a single bolt.☺️
there great!
Just an update.since my last comment:
I still have my electric ratchet, and it still works, the batteries(2) still charge and work.
This ratchet goes hard! I have dropped it at times, it has sat in the cold over the last 3 Utah winters, and it still works like it did the first day.
There have been times I've have used this as a breaker bar on some bolts that are torqued down pass the specs of this ratchet, and the ball bearings inside the ratchet didn't break or bust out.
I am thankful for this ratchet, and thank you again for your video review.
yeh a lot of folk have no choice but to go for the cheap stuff so reviews like this help.
i still use it, its holding up just fine lol
Got this type on Aliexpress after seeing this review, thanks! $30 with two batts, charger, and metric sockets. The torque is just right for my job (factory maintenance) where I won't break small bolts or strip out allen heads. It breaks 3/8-16 bolts (~25ft-lbs spec) loose no problem, and 1/2-13 (~41ft-lbs) with a little bit of help. I just use it and then put it back in my tool cart, so it should at least last until I give it a solid drop from a ladder.
Mine still works 2 years later lol
Thank you I'm here just to find out how to charge it and your video opens to it ❤️🔥❤️🔥❤️🔥❤️🔥
Where can you get replacement batteries?
Should use a short socket same as torque wrench not to lose energy from long socket twisting racket to side.
When I’m lazy I run it on as it’s turning and it’ll break loose blots it wouldn’t originally
Thanks for maknig this video.
I got this but the two battery packs that came with it don't charge up. I checked the plug in charger with a voltmeter and it looks fine. But.. the two battery packs just won't charge?
very weird we have like 4 of these all the batteries have been fine maybe they got discharged to low while they had them in stock
Thanks for the video 🙏
The thing about cheap tools that I’ve learned is that they work until they don’t. That’s obviously not everything, but just a rule of thumb.
I hear you but these for some reason wont die haha almost 2 years use and still going strong only thing is battery tabs broke on the batterys so sometimes they fall out but its bwwn heavily used if your a diy this likely wont happen its been dropped 100+ times
@@toolsonabudget7763 then it’s a good tool and props on having it for so long
You can. Say that about anything
Is this good for removing car tire bolts? @@toolsonabudget7763
Can that tool have adapters that change from 3/8 to smaller sizes ?
U can buy the adapters for that anywhere like harbor freight or home depot
How long does one battery last per charge? I might wanna pick up one to just for on the go and leave my Milwaukee one at home. By the way good review.
i usually go a few days in between charges but if its a heavy day then it will last u a day
Looks acceptable! But do waukie batteries fit it?
No lol they look similar though
Mine came with no charger the cable to charge is there but not the platform to out batteriee to charge How do ya charge yalls?
The battery has a hole in it for the barrel connector it came with
Just buy a snap on at least you can crack them loose with that model and it comes with the rubber drop cover
How easy is to get more batteries?
Well it already comes with 2 batteries, not sure why more would be needed.
In my experience with this specific ratchet from eBay, each battery last about 4 hours if continually used. Extra batteries are available on eBay as well.
How many hours does it last on 1full charge ?
About 3-4 hours if continually using it.
I've had a both batteries sit in my garage for weeks, and it keeps a charge(power) when not charging.
Will Milwaukee batteries fit on this?
No sir. That would be awesome if it did.
In all honesty i dont buy even my Milwaukee ratchets for breaking bolts at really any ft lbs. I use the impact for that. Ive noticed with my milwaukee ratchets i break the bolt free via miscle then run it out or the nut off with the electric part. For the money, this doesnt look like all that bad of a small repairs type tool at all.
I came here after a goofy temu add so I was expecting a lot worse of a product. This don't look too terrible.
Salut tous le mondes je l ai acheté je l ai utilisé puis au fure a musure j ai eu batterie hs , chargeur hs , mauvais contact de batterie dans le cliquet les lamelles de contact a l intérieur de du cliquet se tordre je l ai renvoyé à Amazon condeil ne l achètai pas vous allez le regretter
Crack nuts and bolts with a bar first, its not an impact gun.
I've had my ratchet (same as in video) for 3 years, and I've used it as a breaker bar from time to time to get over torqued bolts, and it seem to break bolts with no issue, and there's no damage to the bearings inside the ratchet.
Not saying this is recommended, but if you feel you can loosen it right then and there, then give it a try.