You're very welcome. I recommend checking my suspension rail videos. Very important (says my mom 🙂) ua-cam.com/play/PLc79sriClvMQovdykYE0BY95xYAJFL3zu.html&si=6rByoCdDuvnipMDC
I did the same with a straight line of top cabinets. Used some boards from the old kitchen to fill up the space between the wall and the rail. The walls are straight overall, but in the corner, the wall was a bit deeper.
@@kitchensbyrannes I would really like to work with you... By the way, I am a carpenter and I have been working in this field from 2010 until now.... and I am from Algeria.
Do you mean big sheets of plywood or similar? That's possible too but you'll need to have that at hand. I've tried using a shelf or cabinet side but they don't reach far enough to give a good reading of the corner.
Just bought an ikea kitchen and haven’t started fitting it yet. But I know the corners are off so this is very useful. Thank you.
You're very welcome. I recommend checking my suspension rail videos. Very important (says my mom 🙂)
ua-cam.com/play/PLc79sriClvMQovdykYE0BY95xYAJFL3zu.html&si=6rByoCdDuvnipMDC
I did the same with a straight line of top cabinets. Used some boards from the old kitchen to fill up the space between the wall and the rail. The walls are straight overall, but in the corner, the wall was a bit deeper.
Well done. Attention to details when installing the rails pays off when hanging the cabinets.
Thank you. This is a very helpful video
@@AntonioVidIQ Thanks. Now you're prepared for your next installation ☺️🙏
Wow, I hope to work under your supervision.....Excellent work. ❤❤
Thanks 🙏
@@kitchensbyrannes I would really like to work with you... By the way, I am a carpenter and I have been working in this field from 2010 until now.... and I am from Algeria.
Start your own Ikea installation business ☺️ unless you are in Ottawa 🤗
I am not in Canada... I want to work there... I am from Algeria. If you can advise me so that I can work in Canada @@kitchensbyrannes
@@kitchensbyrannesThank you for every advice ❤❤❤❤
We check the 90 degrees by put 2 long 90 deg. wood in corner and see where the gap come and how much is it
Do you mean big sheets of plywood or similar? That's possible too but you'll need to have that at hand.
I've tried using a shelf or cabinet side but they don't reach far enough to give a good reading of the corner.
Are you doing Ikea kitchen installs in people’s home? 😇 (USA) ?
Yes, that's what I do.
However, only in Canada 🇨🇦
Despite being close to the US, it's too much of a hassle to do business south of the border.