BREWILLA GEN 4: All Grain Brewing System | Equipment and Rapt Setup
Вставка
- Опубліковано 11 вер 2023
- Pretty soon we won't even have to brew if the technology keeps advancing the way it is!
Brewzilla Lineup:
9.25gal / 35L 220v tinyurl.com/47s6djhf
9.25gal / 35L 110v tinyurl.com/nw5stx47
17.1 gal / 65L 220v tinyurl.com/473f9mn2
What we used to make our stove outlet work with this system (PLEASE CONSULT A PRO FOR THIS SO YOU DON'T BLOW YOURSELF UP):
Stove Extension Cord tinyurl.com/2ruzy93j
NEMA 6-30R receptacle tinyurl.com/mtdsnt54
The box to put it in tinyurl.com/ydsnxssh
& it’s cover tinyurl.com/29bdjn4w
I recently brewed my first all grain batch on the previous model Brewzilla 3.1.1, and I love it. I got it on sale because of the new model coming out so it cost just over half what the new one does, which as a disability pensioner was a great selling point. It doesn't have quite as many features as the Gen 4 but it's still a great bit of kit and I'm really happy with it so far. I hope you get heaps of enjoyment out of your system and make some great beer with it!
Great to see you back Sarah xx
man its hard to find brewzilla brewtubers, but I also brew on a gen 4. 2 things I saw on the video that you may have figured out but I can help with. 1l. The bottom screen is supposed to be a tight fit so the trub doesn't get around it and clog the pump. I didn't re-route the pump, but still don't trust the bottom screen and use a hop spider anyway. 2. The heat exchanger dish connected to the bottom screen was recently added because both the heating elements and thermometer are on the sides of the conical, so the temp was often wrong and the liquid didn't heat as fast as a lot of it would go straight down to the hole and miss them completely. I love your vids... and you may already have figured out everything I've said :) haha
Great to see you back! 🍺
I can't believe that you actually got one👍, it's a nice little system, I got one myself but the gen 3.1.1
Great video. Welcome back
Screws are most likely stainless steel to prevent rust which are not magnetic
Hi, I think the video title has a typo, the word Brewzilla is missing a few letters. Great video as always. Cheers!
Keep em coming Sarah.
Nice to see you using a Brewzilla as well.
It's about frigging time. Welcome to the show.
I had problems trying to get my Wi-Fi hooked up to mine so I shut mine off did everything manually. I hypothetically use my 110 gen 4 for distilling but I plan on using it for brewing beer too!
Just picked up a Gen 4 65l. Currently cleaning it ready for brewing. Here is one tip I can give already. Before trying to connect to RAPT check you have the latest firmware. It would have saved me an hour of swearing. Connecting to the fermentation chamber after that took about 30 seconds
interesting review. I'm not sure I want something that fancy. The clawhammer all in one system seems to do exactly what I need and I'm pretty happy. Wifi...just seems too fancy for brewing needs but an interesting tool none the less
My all in one pump gets clogged up regularly luckily it’s on the side so really accessible. Used bazookers inside the tap but that doesn’t work I really need to find a inline filter that withstands boiling wort. Great vid as always cheers from over the pond 👍🍻
In the Netherlands we only have this all in one brewing systems en most people replace the bazooka filter with a lauterhelix.
@@simonevdw90 just looked it up and that looks interesting cheers 👍🍻
Youre a riot.. "a 4th time!!!!"
Most stainless brew stuff is not magnetic. This is also why you can't put magnets on stainless refrigerators. Some stainless is magnetic but it does tend to rust a bit quicker in my experience. Cheap stainless cutlery. If touching another metal type, it will rust fast.
If you trim the recirculating silicon hose to a length that is not in the wort.
Then when the pump is turnedoff it doesn't suck grain into the tube and block the pump.
Yep, wifi is a 🤬 Sunday I started the Rapt Pill up in a Belgian Blonde Ale, all good till today. It says: The dashboard has changed and is now customisable !! and my Pill are not to be found online !! please register device again 👎other vice, great you're back 👌😉
Worst software on a consumer device I’ve ever seen. Like, I think a 7 year old would do a better job at building software.
I have been thinking on getting the 220V myself but don’t have a dedicated outlet in the location I want the equipment. Can you post images of the electric work done? I will appreciate it a lot! Thanks for the great video
I watched until the end.
@FloraBrewing a small mistake in your title "BREWILLA GEN 4" is missing the Z .
Wrong in the thumbnail too
Did you replace your Clawhammer setup with the Brewzilla? If so, what made you change?
What was your overall impression compared to other brewing systems? I've been using the 65 l version for around 9 months now. It took me a while to get the system sorted. Initially, I clogged the pump a few times with hops, that seems to be sorted now. Then I had an issue with the base of the malt pipe falling in when making double batches. I've sorted most issues out and I think it is a pretty good system for a low budget. There are some good videos on UA-cam on setting up the PID for different volumes that are worth watching.
The software is a total clusterfuck.
FYI, Starsan doesn't do a good job of passivating stainless steel.
Try a pressure fermented smash beer with only honey malt and magnum hops. Could be interesting.
Is there a cost for setting up and using a RAPT account?
You didn't blur out your mac or validation code on the brewzilla display but did in the app
I’m trying to set up my Brewzilla Gen4. But I keep getting an error message at the step of “attempt to contact device”. Have you had the same problem? I find that the rapt portal is not easiest thing to use. Do you have to use it on a computer instead of on a cellphone?
The screw that fell out of your magnetic dish is probably stainless steel.
So did you have to end up cutting one of the tubes? I just rerouted My pump config, doesn’t seem like there is a kink but it’s. Definitely possible. It looked better before but I’ll give it a try
Why reroute it?
Hi Sarah, great video, where did you find the pump rerouting directions?
Interestingly, it's in the user manual.
@@dustinlight4716Thank you! That's the last place I would have searched!
So tell me why you rerouted the pump?
It allows direct draining of the kettle to the spigot without going through the pump. That way, if the pump clogs, you can still gravity drain out the spigot.
Überlebensradar!
Good luck with the steep learning curve. They are great systems but with all that new rapt stuff in the gen4 it's lost the experience from the simple and functional gen3. Now you need wifi, now it's computer nerdery. I'll stick with a gen3 thanks.
Cant magntise stainless steel.
Something to know is that you’ll need a boil screen at $20 or so to actually make this thing boil. And you’ll need the extra BTLE thermometer to actually get temp control to work. And also, the software SUCKS.
Some stainless steel is not magnetic
Wow. How she gets views blows my mind.
Most pathetic software system I’ve ever seen in my life. RAPT is a mess and there are so many bugs it is unusable. Even the profiles suck on the brewery itself. If I could get a refund and buy myself a Grainfather, I would.