Is this the ULTIMATE Arrma Grom? ...UPGRADES OVERLOAD!
Вставка
- Опубліковано 7 лип 2024
- Making the awesome little Arrma Granite Grom into a WICKED 1/18 BASHER😍
OH MY it's getting pricy though🤯
Here is the CRAZY 2s set-up I have installed👇
Andersons 2840 8.5t 6000kv sensored motor
...not available...
But most 2845 5000-6000kv motors will give you similar results.
Yeah Racing alloy off-road shocks 60mm
www.ebay.com.au/itm/126273726371
GPM 7075 front steering block
www.gpmparts.com/arrma-granit...
GPM 7075 rear hubs
www.gpmparts.com/arrma-granit...
Hobbywing Qickrun 60a sensored 2-3s esc
nl.aliexpress.com/item/100500...
CRAZY Grom bash!
• Stock shocks vs Maveri...
Arrma Grom: • Arrma Grom
Some of my other RCs you may want to check out here👇
Quad Motor VRX
• The Evolution of RC ca...
Kraton 6s EXB: • Kraton 6s EXB
Arrma 1/8 Krayon 4s: • Arrma 1/8 Krayon 4s
Mojave 4s BLX: • Mojave 4s BLX
HPI Vorza S 6s: • HPI Vorza S 6s
Maverick Atom 1/18: • Maverick Atom 1/18
RC Boats: • RC Boats
WLToys speedruns!: • WLToys speedruns!
All of my DIY carbon, aluminium or polycarbonate parts are cut with a jigsaw and drilled with a hand drill.
Most of my materials like Carbon Fibre, Aluminium, polycarbonate and hardware like screws, bolts and nuts are purchased from Ebay Australia but most of what I use is easily found just by Google searching the material or hardware you require.
Music made on the GroovePad phone app.
All editing done on my phone using the Kinemaster phone app.
Email
saulaldridge@yahoo.com
Facebook
/ rc-crazy-110316407770980 - Розваги
Arrma Metal Axle Hex Set are in stock over here in the UK via Modelsport at the minute. Another good video fella. Keep up the good work.
Thanks mate!
Yes we can get a heap of different versions of the metal axle/cvd sets here in Australia.
My stock plastic ones are still in perfect condition so I don't plan on upgrading the axles unless needed.
Had is a beast of a little ESC. I got it and one of my little trucks. I can't even remember which one now and it's phenomenal
Amazing effort again Saul. Well done mate. Love it 👍
Knew this was gunna be good when you told me about it, its turned out amazing 😁 also, editing keeps leveling up, keep it up dude 🤟
Thanks man!🥹
I really appreciate when people notice I'm trying to do better with my editing and creating, it does not come easy to me.
And yeah your lucky, you get a sneak peak at my projects before anyone else😅
Cool stuff 👍👍
Nice! I just picked one of these up for my son. Tough little truck! I think I am keeping mine stock for a bit, but this will be helpful in the future
Nice man🤘
Yeah even stock they are super fun.
I'm sure yous will have a ball, I know you love your yard bashers😁
Sweet video buddy some nice upgrades looking like a little ripper as always buddy you videos are awesome 👍👌🤟😎
Thanks heaps David😁
It is turning into a little ripper for sure, few more small but important upgrades and it will be perfect I think👌
Thanks again mate!
Awesome little basher‼️👍👍🦾🦾🤘🤘
The team associated MT 14 tires work pretty good on it
If they are bigger in diameter than the Grom wheels I won't use them as the car would not be able to bottom out if needed.
Holy, that thing rips
great vid, this thing is a rocket
Great video 👍love the build process content in your videos. Nice car for sure.
Thanks mate👍
I love to tinker 😁
Man you really did go all out on it and MORE to come 😝 love it mate and the shock build tutorial spot on!
I still haven’t done any upgrades on mine and haven’t had any time to even take it out 😒
Interested in what shell it ends up getting and what suitable wheels you find for it.
And yeah still no upgraded diffs 🤨😔
Cheers legend hope you’re staying cool! 🥵
It was a stinker today hey🥵
Shed is nice and cool luckily.
Yeah I went a bit nuts on it but I still haven't spent as much as I did on my Teton and it's already heaps better so I'm stoked!
I understand mate, if your working and have real life obligations unlike myself🤦 you do have to prioritise, I'm sure you'll have a ball bashing and upgrading it when you can😁
Shell looks AWESOME I think but I've not found and wheels the same size other than Teton wheels but they are not better in my opinion, I will give then a test at some stage though.
And I decided to get Hot Racing diff outdrives in hopes that I will not need the diffs as the plastic outdrives seem to be the weak point for most people.
@@rccrazy That’s good to hear I hate the heat 😞
Yeah I have seen the hot racing outdrives hope they go alright. Hope to maybe see a skate park session video with all the upgrades when you get a chance 😉😉
Cheers mate 👍🏻
Yeah that's the plan, was trying to get it all upgraded and finished and then get it to the skatepark😁
@@rccrazy Awesome can’t wait 👏🏻😎
Very Cool my friend God Bless and have a good one.
Nice bro looking awesome. I need upgrades axles to. The upgraded diffs I got work great but now I break the plastic were the pins go threw. So I want to upgrade that and be all good I think. I really can’t believe you have not had diff trouble yet to be honest.
Thanks mate👍
It does look awesome now and feels amazing to drive.
Yes I have seen a few people break the axles now, mine are perfect still but I did get the HotRacing steel outdrives so I may start breaking axles soon😅
And as for diff health I don't like saying I'm a "good driver" but there is ways to prevent some damage like diffs.
Land jumps with little/no throttle.
Don't do/try standing backflips.
When crashing don't throttle just let it so it's thing.
Not saying I won't have diff damage at some point.
Good video. Nice upgrades to the little truck. I could be wrong about this, but shouldn't you go on the side of the ramp to go over it ,not under it.😂
I chose not to resist giving you grief about that one. 😂
I knew the ramp was there yet I still tried to use the corner for drifting, I don't blame you for pointing the finger😅
Thanks Tim🤪
The mjx wheels fit and work great
If they prevent chassis bottoming out then they are not good.
One think you want is the chassis to take the stress and main impacts not every other component.
@rccrazy OK. Cool. I would rather have my tires and suspension take impact over my chassis. The chassis holds all the expensive electronics.
@robertshelton2605 it's not a preference it's the way all proper RCs are set up specifically to restrict or limit damage of every part.
The wheels will always get some stress but when running expensive shocks you don't want bent shafts and popped bladders so yes chassis bottoming out is VERY important!
Can you do any of this with the Mojave Grom?
Yes absolutely👌
Most parts are the same on all the Groms except the chassis and chassis lengths, centre shaft lengths and possibly some new features on the Mojave we don't know about yet.
have you thought about different tire and wheels i have 1/16th bezgar tires on mine the little bigger tire really help als redcat 1/16th volcano tires work well... mine has a 4600kv motor and a 16bl30 esc and mine does great
Yes I mentioned in this video that I was looking for some different wheels.
Only ones I found to be the same size are the Teton wheels.
Can't go bigger with these shocks because the chassis won't be able to bottom out.
@@rccrazy idk the bezgar are a ton bigger I can't see it being a issue especially with bottoming out I run them on mine but then again I don't have a issue with the stock shocks.... but that's what your going to have to do so maybe some proper shocks so you can get the bigger tires
Proper shocks?
These shocks are Yeah Racing race spec shock, they are like 10x better than stock and they have about the same travel so I don't understand what you mean.
I don't want bigger wheels they are not needed and these shocks with this size wheel is perfect, just need to find some more wheels the same size as stock.
@@rccrazy well you said if u put bigger tires on it that it wouldn't bottom out because of your shocks. I guess to me that sounds like the shocks are not correct for the rc and ARRMA even makes a way better aluminum shock idk about yeah racing not a super popular thing here well maybe in the 1/24th world....
and most definitely a tad bit bigger tires will give you tons of are control to where it doesn't nose dive on 2s best and really only upgrade I've needed to do besides the hobbywing brushless combo check out my skatepark bash it's a little beast and that's with stock electronics.... it doesn't take much to make these a stunting machine
@RC4us the fact that it's doing exactly what it should be doing with these shocks and the stock wheels means the setup is fine.
I don't need more air control and its no way a lack of power causing the nose to drop it's just a nose heavy or nose dropping car no matter the set-up.
I don't see bigger wheels as a practical change if it causes issues which in my case it will.
Personal preferences mate😁
Oh and Yeah Racing is a well known brands all over the world😅
are those tires good? would they fit hbx 16890?
They are not foam filled and are a little small for 1/16 cars like the 16890.
They are 12mm hexes though.
Really fun little car!! not good for me watching things like this, this hobby gets expensive!!
Don't I know it😱
I am only on government payments because I can't work a normal job and it's impossible to do what I would like to do on the channel due to the cost.
Please give me one of your rc car
All that money, and it still sucks.
What a sad person🥺🤣
@rccrazy Every time i see an Arrma, i do get a little bit sad for the owner, 🥲
🤣😂
👍👍👍