Marthy on the FZ6R boards builds them. He can build you one for about $500 and not as loud as the Two Brothers. Mine should be arriving in the next few days, so check if you want some comparison vids on my channel.
Yeah buddy you're rep ping houston the right way man I just got a 2013 fz6r and I'm looking for cool stuff to do to it thanks for the tips man be safe there's some real idols around here 😂😂😂 you know what I mean
@ylism Still about 50mpg depending on how hard you ride. I use advance gear program with the power commander 5 so only the 5 gears are aggressive. The 6th gear fuel map is for cruising.
Awesome you could do your exhaust for only $300! Otherwise they're $700 and into $1000 for a full system. Bike might be long gone by now, but do you keep your seat in the low or high position? I find that in the low position, there is a gap between the seat and the gas tank...it's really annoying me since the lip of the plastic part on the seat goes beneath the low setting. It does not wobble, so I know it's seated (pun intended) properly.
Yooo on my 2014 if I put the seat in the high position I've got like a 1.5 inch gap between the seat and frame it's crazy looking is it like that on every fz6r? I ride with it in the low position just for this reason it looks super dumb with it in the high position
@@robmuhfacka5986 hey, it's been years since I've had the FZ6R, but I seem to remember it being that way. It would be cool of they had a fairing piece to block the gap or something.
I had a similar fender eliminator kit and cop pulled me over saying its to bent and he straightened it out, on my ride home tire hit the plate and almost sliced my tire. happened twice. gave up and got an R6 eliminator kit. plate still fucked tho. if cops pulls me over again ill pull out the traffic act that im legal and he can shove it. lol
Marthy on the FZ6R boards builds them. He can build you one for about $500 and not as loud as the Two Brothers. Mine should be arriving in the next few days, so check if you want some comparison vids on my channel.
Yeah buddy you're rep ping houston the right way man I just got a 2013 fz6r and I'm looking for cool stuff to do to it thanks for the tips man be safe there's some real idols around here 😂😂😂 you know what I mean
Yes, it does. It also makes the ride smoother...
@ylism Still about 50mpg depending on how hard you ride. I use advance gear program with the power commander 5 so only the 5 gears are aggressive. The 6th gear fuel map is for cruising.
frontbrake gives you 80% stopping power, Rear brake gives you just 20%. You can use the frontbrake when you're riding straight on a paved road.
Hey just got a fz6r 2013 enjoying it a lot I heard u say that ur in Houston do u ever go on group rides if so I would be down to tag along
Check out the custom seat kit by Seat Concepts, amazing!
Good vid man! Im gona do almost all the same. Thanx
Good info thanks I got da 2012 fz6r
Mc13oner Where did you buy your headers??
not bad,.. you should see mine,..cheers
I have downloaded a map from FZ6rforums... Its one of Marthy's custom maps for free.
@toyotasupra91 Its just plug and play bro
Can you use Yamaha r6 mirrors on the fz6r
Factory rear wheel is usually 160
Awesome you could do your exhaust for only $300! Otherwise they're $700 and into $1000 for a full system. Bike might be long gone by now, but do you keep your seat in the low or high position? I find that in the low position, there is a gap between the seat and the gas tank...it's really annoying me since the lip of the plastic part on the seat goes beneath the low setting. It does not wobble, so I know it's seated (pun intended) properly.
Yooo on my 2014 if I put the seat in the high position I've got like a 1.5 inch gap between the seat and frame it's crazy looking is it like that on every fz6r? I ride with it in the low position just for this reason it looks super dumb with it in the high position
@@robmuhfacka5986 hey, it's been years since I've had the FZ6R, but I seem to remember it being that way. It would be cool of they had a fairing piece to block the gap or something.
@qasdr85elcamino These mods will only get you to 130 faster but will not increase the top speed unfortunately.
The viper can I bought from flyncycle and the headers on ebay. See my other video
Can you please provide more info as to where you purchased ur viper exhaust and headers so cheap?
Yea once in a while... go to motohouston forums for the rides
hello friend the power of the commander much difference in speed motorcycle thank await answers
where did u purchase the break lines
also what map ru running on the pc
I cant tell if you installed aftermarket rear spools
There is no pre threaded hole for spools on this bike
what model can is that viper
Change those stock turn signals
Bruh ur like 5 years late
I had a similar fender eliminator kit and cop pulled me over saying its to bent and he straightened it out, on my ride home tire hit the plate and almost sliced my tire. happened twice. gave up and got an R6 eliminator kit. plate still fucked tho. if cops pulls me over again ill pull out the traffic act that im legal and he can shove it. lol
You won't need your tools, huh? Or you don't know how to use them?
Jose Sanzere why didn't you get a R6?
if you are using your front brakes on a normal basis then you arent riding properly...front brakes are really only to be used for emergency situations
Remove those ugly fork reflectors. 😜
what in the blue fuck are you talking about?