CAMSHAFT CAPS TORQUE SPECS ECOTEC 1.8 1.6 CHEVROLET CRUZE SONIC OPEL ASTRA INSIGNIA ZAFIRA MOKKA
Вставка
- Опубліковано 15 січ 2025
- CAMSHAFT CAPS TORQUE SPECS ECOTEC 1.8 1.6 CHEVROLET CRUZE SONIC OPEL ASTRA INSIGNIA ZAFIRA MOKKA ALFA ROMEO 159 FIAT CROMA
In this video we will show you the camshaft caps torque specs on Chevrolet / Opel/ Vauxhall/ Alfa Romeo / Fiat Ecotec 1.8 (A18XER 2H0) engine and what what needs to be done to install your camshaft caps correctly. This engine is used in many Opel,Chevrolet and Vauxhall, Alfa Romeo and Fiat cars so it should be very helpful to show you the camshaft caps torque. We demonstrated on a 2015 Chevrolet Cruze.
This video may help you on:
Opel Astra 1.8 1.6 Camshaft Caps Torque Specs and Sequence
Opel Vectra 1.8 1.6 Camshaft Caps Torque Specs and Sequence
Opel Insigna 1.8 1.6 Camshaft Caps Torque Specs and Sequence
Opel Zafira 1.8 1.6 Camshaft Caps Torque Specs and Sequence
Opel Mokka 1.8 1.6 Camshaft Caps Torque Specs and Sequence
Chevrolet Orlando 1.8 1.6 Camshaft Caps Torque Specs and Sequence
Alfa Romeo 159 1.8 1.6 Camshaft Caps Torque Specs and Sequence
Fiat Croma 1.8 1.6 Camshaft Caps Torque Specs and Sequence
Chevrolet Cruze 1.8 1.6 Camshaft Caps Torque Specs and Sequence
Chevrolet Sonic 1.8 1.6 Camshaft Caps Torque Specs and Sequence
► Torque Wrench 1/4: amzn.to/2K2jz9n
► Torque Wrench 3/8: amzn.to/2ymcIRn
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com...
► Our Website: mechaniclifesty...
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/users/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
I was going to say did you guys have been very helpful for me in my Chevy Cruze repairs thank you very much
I've tried commenting on 4 different vids and DMing you, if you get a chance please either let me know or mention in the next camshaft video whether there is a break in process after installation as it's a flat tappet
Cometiste un error en poner silicon en los canales que sirven para que regrese el aceite donde vam los retenes o sellos de aceite del arbol de levas.
EXACTO
Cuales canales? Los 4 pequeños como de un octavo?
@@CarlosHernandez-zk4pxsi, son canales de retorno de aceite del retén de árbol de levas,, si los tapan con silicón, en poco tiempo le comenzará a fugar aceite por los mismos retenes
It is very helpful with these info
I learn a lot from your video’s. I’m replacing the exhaust camshaft only. One tooth to the right broke off. Even though Zi replaced the camshaft sensor, the code still shows sensor is faulty. My question is: Will replacing camshaft solve the problem. And I’m so afraid I might not place the camshaft in the wrong position. Any suggestions
شكرا لك اخي انته مميز
Hi, what torque do you put at the head of the engine?
Can I use the 1.8 cams in my 1.6 to create more power???
They're identical so won't make a difference
Thank you!
How do you line up the camshafts so that they are timed? Or aligned?
Once they have been took off idk but am searching and will share. With the vvt sprockets it seemed like exhaust cam was sit on a quarter off so when u layed the chain on the intake cam on its marks when u went to put on its marks on exhaust the sprocket it self had to be rotated back to get the marks lined up. I know this. U can’t set chain on its crankshaft mark at dead center the try to line marks up on sprockets to figure out exactly where they bolt down maybe u can set Intake cam like that but not exhaust. If u find out before me plz share
These cams have grooves where a timing tool can be placed to align the cams. Alternatively two vice grips or a 21mm wrench holding the cams behind the sprockets. Make sure the grooves are horizontal
@@kas1nova1 i have a problem and need help the cam sprocket on the left doesn't line up the line is not horizontal but the cam is straight from the back and it is on tdc how would i adjust the sprocket to line up
my friend same problem my bush machenic he dont know
I heard that you should never double click on torque wrench.
I like to double click too but i saw a videi of a mechanic saying that you should never double click ....what fo you think about that
I have a 2015 eco tec motor I put in my 2009 if I was to remove the cam from my old engine and put in the 2015 engine would I have to use the caps from the 2009 engine or can I use the 2015 ones?
the service manual clearly states NOT to put any sealant over the grooves on the bridge cap.
PLL Lot, thanks for that info 👍. I am doing one of these right now. (Valve job due to broken timing belt) The "manual" on csmans is very unclear about where to apply the sealant and neglects to mention what type should be used.
Would this work for a Equinox 2012 2.4???
My camshaft bearing cap cracked a little from the side of the screw can I still use it since I can tighten it. Or replace the bearing cap?
Would this work for a 1.4 l engine
What if my numbers are 1-8 is it still the same thing as 2-9?
Is the 09 to 11 1.6 and 1.8 head the exact same head? I cannot find measurements that are different.
Yeah they're practically identical, it's only really the block that's different
Can someone please tell me the camshafts part numbers?
8nm or .8 (da nm) Chevy said 8ftlbs on 2.4 which would be good on reused bolts but 8nm is 6ftlbs
Lee, something doesn't add up somewhere?... csmans is also showing the torque to be 8y (nm) or 71 in-lb... but that only converts to 5.92 ft-lb?
I'm doing one right now and replacing the head bolts for new as directed, but this has me thinking ALL the bolts should be replaced?
@@andrewulrich4930 now I am talking about the set of bolts that holds the cams to the engine is 8ft lbs the head bolt torque I got from another video
@@andrewulrich4930 my wrench on one side says (da. NM) M. Kgs. And when set on 8. Which I assumed was 8nm. On back side is the ft lbs and it’s on roughly 58ft lbs I was also snapping bolts at 4nm. And it felt like way to much. So when I called Chevy to order a new bolt set I asked them and they said 8ft lbs.
@@andrewulrich4930 I’m no mechanic am I missing something?
@@andrewulrich4930 it’s like I’m finding stuff to support both our measurements now.
Hyundai i20 camshaft caps torque how much n.m?
People I am in a pickle , I might have mixed my camshafts up on my 2014 Chevy 1.8 Sonic, is the intake side have a Stamp “B” or “A”???? Can you please help!!????
Check it out it isn’t 8nm it’s 8foot Lbs so the dealership told me and my bolts snapped at 4nm
What’s the numbers and locations of exhaust caps
From the front, not including the main front bearing cross member (camshaft position solenoid housing) that has both inlet and exhaust caps, you go 6, 7, 8 and then 9 is the rear most exhaust cam bearing cap next to the pulse generator ring on the back of the camshaft. By the way, when installing the camshaft position solenoid housing, it is vital that you keep the oil grooves clear of sealant so that oil trapped by the front seals is able to return into the valve/tappet chamber.
8nm torque?
Did you ever get your answer for the torque?
@@RODRICO1 8 nm is correct.
He’ll 8 nm snapped one bolt the I used a smaller torque wrench and put it on 4nm and it snapped another one. WTH is going on. Even with if I get new bolts it just feels like to much
any one can give me timing for chev f16 d3 machenic cant make it
my chevrolet cruze timing is ok but when turn engen is jemming
If ur going by nm it’s .8nm It’s 8 deca nm
8nm for 2.4 ecotec 08 as well
I heard 41 time , the word guys start to finish the video
.
Dont submit