DK Customs External Breather kit Installed Milwaukee Eight 2021 Road Glide Limited 131 CI
Вставка
- Опубліковано 7 кві 2021
- In my opinion a must do to extend the life and increase performance for you Harley Davidson engine. No matter what engine to have. I wanted to install this kit in my last bike but traded it before getting the chance. So I install it on my new bike ASAP. Thanks for watching. Cliff
Parts used:
1/4 rubber fuel hose
3/8 black stainless braided hose - (3/8 rubber fuel hose also works)
1/4x1/4x3/8 barb brass fitting
5/8 rubber grommet
Motorcycle front brake reservoir kit (only used the mounting strap & small tab)
1/4x1 1/4 stainless allen pan head bolt
1/4 stainless nylon nut
1/4x1 stainless spacer
zip ties
Drilled two 1/2 holes (to fit the 5/8 grommets)
DK Customs External Breather canister
This video is for entertainment purposes only. - Авто та транспорт
EXCELLENT. I have the same breather and like you I have looked at many dif kits and nothing looked good. I will DEF do this.
Thank !
Ok, so I've pretty much watched "ALL" of the catch can vids on YT and your setup by far is the BEST I've seen. Thanks for the detailed process of installing it, I am going to do it the same way you've done yours. Although, I am a bit jealous of the 131. haha...Great vid and thanks for sharing.
That clip was originally attached a bracket that came on the original air cleaner. That bracket is removed for most, if not all, aftermarket air cleaner. I only know this from all the air cleaner videos I've watched trying to decide on which one I want. 😁
Great video for this breather type !!! I’ve been looking for this type video to do mine!!! THANK YOU!!!
Great minds think alike. I literally did the exact install on the backer plate. However, on my hose i went up and between the cylinders and mounted my filter under the hoen on the oppsite side. The reason i went up is that the feuling vented
dipstick install says to go up and around before going down. I followed their logic and i guess we'll see if it pools anywhere in my line
Great vid, you could try coiling wire around the rubber hose behind the air cleaner, that hose will surely kink when it gets hot, I'm going to do the same you have done to my bike thanks for sharing.
I would have left the T valve inside the aircleaner so that only 1 hole is needed to be drilled
I’d recommend two holes. You really don’t want anything in there that can potentially come unhooked and make it’s way down the intake track
I got a t and some hose at Lowes and vented mine to the road. No catch can. The mist is miniscule
Id like to see how you routing the lines. I like venting to street.
Awesome video well illustrated 👍👍
I used the brake reservoir just put some foam in it and a y piece and fixed it to the cam cover, DK customs would be great but postage and currency conversion to expensive, the brake reservoir does essentially the same for 20 Australian dollars
My throttle body harness keeper was exactly like yours. Not attached to anything. Just hanging there. Come on, Harley!
Most excellent video 👍🤙✌️
Great video, where did you get the bracket for the catch can specifically?
I'm gonna do the exact same thing except I'm using 1/4" on everything, hose, t fitting , filter. Except Im going to route it differently,
Hey
Good video. Question how does the factory air cleaner work with such a big motor? Doesn’t it need more air
Why don't let the tube goes down to spit the oil on the road?
That's good but it needs to be dumped out occasionally? That catch can.
That is the exact same break res I got , I used zip ties to fasten it under the bike.
I saw another UA-camr place it where I did and liked it. Easier access, can tell if it ever over fills, and if it does over fill. It doesn't get in your rear tire.
What size drill bit did you use for rubber grommet on the backplate? Tia..
Where did yo find that flat mount u sed to mount the bracket with
Where did you get the brass “y” fitting from I can’t find it anywhere.
Made me nervous cutting those zip ties. Diagonal cutters ?
I thought they fixed the problem with the 2020 models? Guess not
They fixed the oil pump over scavenge issue. This is designed this way thanks to the EPA and all bikes and cars are subject to similar set ups.
Where did you buy the catch can.
I have watch several videos yours is the cleanest.
Its at.... DKCUSTOMPRODUCTS.COM
yep copy from the gingerbeared man s vid ....but best way to do it, don't forget to spray some silicon spray on the inside of the can so it don;t rust and add a little more foam in there to
A little but different bikes. Spray inside the catch can I take it?
I thought they fixed this issue starting from 2020? I just purchased a 2022 so will I be experiencing the issue?
What about possibly voiding the warranty?
I used a T to join the two breathers , that way I only needed one hose.
I used a T fitting also. Just mine was more in a shape of a Y. lol
@@cliffcares6455 Good one 😀
Didn’t you just eliminate the venting of the engine? Why not just a filter on the end why a catch can?
There is a flat spot in your left hose up to the tee
💯👍👍
Is that a blunt?
I was hoping you would’ve told us the torque specs.😬
The reason I don’t is they can be different from bike to bike. That’s why I always suggest getting the service manual for your bike.