I love this man, so many people with little to no experience with far drivers will learn from this. This is why I’m a subscriber, and why I like your videos. Fantastic video like always! 🤘
@@VoltronWatts I’m trying to decide between the b1 with lil bit cont and amorage 72v 150amp batt or e&co rtr etm? Or what could you recommend? Is there a better forum to ask you this?
I appreciate your support Paul! I think it will see slow organic growth as the modified razor scene grows. I’d like to get into some other aspects of e-motorcycle type stuff but the cost of entry is pretty high. Hopefully in 2024 I can swing it!
Bro please let me know what motor you think would be best and fastest. I have a sx500 and currently starting my build I don’t want to buy a motor and be disappointed then end up buying something else. Should I buy a qs138, qs180, the motor in this video, or a hub motor. A guy I know has an 8000 watt qs hub motor for 250$. The Sotion in this video seems like it fits right in with no fab work where as the qs138 I’m not sure will fit without some fab work. If you can man please take the time to just let me know what motor is the best out there. I’ll be running 76 volts. Thanks again for your videos they really are so much help and needed for this community! Thanks!!!!
Did you hook up your 3 speed switch before you did those test pulls? Nothing hooked up to the 3 speed connector on the harness will lock you in mode 2 which is usually set to 75% on your line amps. Or did you turn it down to 140 amps? Curious cause it was set to the factory 200 amps during your vid call with jordan. Shes got an extra 60 amps on tap!
Hey Eric, I try not to recommend one company over another. But in my videos I have several companies listed in the descriptions. I just want the viewer to make their own decision 👊
Sick man, had to watch in parts, got all kinds of shit going on this morning. But anyways it looks like a beast! Can't wait till you get everything dialed in. Specially the launch control!
I've been waiting for you to drop this video. And like always you did a great job... Now I'll be counting the days until i receive my Fw11 motor. one note , you forgot to mention the Jetpack controller that Jordan is also selling for the Fw11 motor.
I just purchased this killer.. But i got the Sotion 270/660 AMP Controller.. for the fw11 i guess its a Fardriver,,, I little lost but what ii got coming ..Killed mY1020+ Have the Best Vids!! Make me feel not so bad being a older dude thats into this i got hooked quick,, I really enjoy your vids helpd me alot..!! Godspeed!!! Brother,, Now to go get my gear gona need it
@@VoltronWatts Oh boy its all together ! Ryan Is the BEST! helped me on lunch hour to get my app for android....ughhh...now to get a screen shot of whats on it when i BOnd it.. ? I had no room to mount my fardriver on my mx650 had remove gas tank...Have that Momomentum watts Batt 72 // 32ah..... im doin 11/72... Dirt moto.. Scared turn thison LOL...! plus gave me incentive go back to lifing again,,,!.. People are Amazed when i blow y them on whops out now where....lol!
Daaaamn bro. Glad you survived that new beast of a motor. Lol! So of course, where to buy this thing. Seems better than E&C.😮Love your channel and what you do. Keep it up brotha. 😁👍
Do you have a video on fine tuning this setup? I’m running FW11/ND72530/60v26ah right now and saving for the same size battery. Even with my setup this thing rips. Scares me on mode 3 100% wide open. I can only imagine with a 72v battery.
Lol man ive neen dbating between a sotion surron motor and swing arm or the fw11 for my 9 year olds bike that i will ride when he is not. Then you keep saying not for a kid. The flipsky i belive eforce said you can gave multiple tunes setup for say kid or mom or dad and you just click the profile for each rider
Yup, that’s why in the video I had in text “unless you turn the power down” I wouldn’t let my kid ride it. if you can control the power tho, then it doesn’t matter 👌 let em rip!
Do you think this would run good on the Kelly kvd from electro and co or should I just buy the ec4p? I love the power curve of the my1020 6kw but I burn them up too much. I mostly stunt don’t wanna extend the swingarm what’s your opinion
I have never ran the FW11 on the Kelly so I don’t have an opinion there thats worth a shit. 😂 I’ve seen many people run the EC4P on the Kelly successfully 🤷
It would give the wrong signal if you’re trying to hook these up with different controllers. Not a big deal. Can be un pinned and changed per your controller connection
Amorge batteries have been great and many more will say the same in the modified razor community. You can order them with a metal case now for $20 extra I believe. Good stuff 🤙
This long form format is cool for avid fans, but if you want to expand into most of the audience, a short form summary is what will really get you the clicks. I don't have 30 mins to sit and sift. I tried skipping and didn't catch any of the real world comparisons needed to make a decision.
I disagree, the video was very helpful as it is. I like the vlog format more than a spoon feeding as it’s important to understand what and why before building out a $4000 motorcycle- it’s also a matter of safety!
I love this man, so many people with little to no experience with far drivers will learn from this. This is why I’m a subscriber, and why I like your videos. Fantastic video like always! 🤘
Dood, thank you for feedback! 🤜🤛
Thanks for the shout out bro! Glad we could connect. Stay safe out there and let's us know if we can help you with anything else!
Was my pleaser! More Sotion content to come!
Hell yeah, this is packed with a ton of info. The step by step directions is perfect for our community of builders and hobbyists.
I’m glad you enjoyed it! I was torn about including that part because it’s not “exciting.” But it is informative so I left it. 🍻
Killed it again. All the info I needed in this video. Thanks for all the hard you put into these videos for the community!
Thank you for watching and recognizing the effort good sir 🍻
Thanks for making this! Got a fd72450 and a FW11 both on order. Now the hard part- waiting!!! Will be for my Bomb Moto B1.
You’re gunna love it!
is this motor a direct fit for the b1??
@andysoles849 no. Some modificstions wools need to be made
@@VoltronWatts like metal fab modifications? Or an overpriced adapter kind of modification?
@@VoltronWatts I’m trying to decide between the b1 with lil bit cont and amorage 72v 150amp batt or e&co rtr etm? Or what could you recommend? Is there a better forum to ask you this?
Ha I just noticed you live in my area. Manchaca and Frate Barker ?
Yes ziiir!
You’re channel is gonna blow up man, great work.
I appreciate your support Paul! I think it will see slow organic growth as the modified razor scene grows. I’d like to get into some other aspects of e-motorcycle type stuff but the cost of entry is pretty high. Hopefully in 2024 I can swing it!
Bro please let me know what motor you think would be best and fastest. I have a sx500 and currently starting my build I don’t want to buy a motor and be disappointed then end up buying something else. Should I buy a qs138, qs180, the motor in this video, or a hub motor. A guy I know has an 8000 watt qs hub motor for 250$. The Sotion in this video seems like it fits right in with no fab work where as the qs138 I’m not sure will fit without some fab work. If you can man please take the time to just let me know what motor is the best out there. I’ll be running 76 volts. Thanks again for your videos they really are so much help and needed for this community! Thanks!!!!
Hey man! Thanks for watching and your support! This is a Sotion FW01 Bolton on swing arm kit. Great motor, great kit 💪
Did you hook up your 3 speed switch before you did those test pulls? Nothing hooked up to the 3 speed connector on the harness will lock you in mode 2 which is usually set to 75% on your line amps. Or did you turn it down to 140 amps? Curious cause it was set to the factory 200 amps during your vid call with jordan. Shes got an extra 60 amps on tap!
No. I didn’t install a 3 speed. I used the little jumper to bypass the switch connection. Which should put it in the fastest mode, right?
@VoltronWatts yup thats correct, the jumper should put it in mode 3. Definitely strange it was only peaking 140 amps.
I didn’t see it peak at 140amps. I saw 200DC amps. Did miss something?🤨
@VoltronWatts unless im missing something, at 19:40 your current never goes above 140.
@VoltronWatts also check out your watts, it stays around 10kw. It would be 14-15 kw at 200 line amps.
you guys should make a 11kw mototec motor or a better and more power for the mototec please!!!
I believe something like that is in the works 🍻
@@VoltronWatts Thanks so much!! We need it
@@VoltronWatts make a full kit 14kw for a mototec like the razor
@ogsurrom yez siiir!!
@@VoltronWatts When???
Thank you! Do you recommend a specific controller, motor, and battery to buy? Or a website that has the items needed? Many thanks! Erik
Hey Eric, I try not to recommend one company over another. But in my videos I have several companies listed in the descriptions. I just want the viewer to make their own decision 👊
Always dropping great content 👍🎄
Thank you! 🙏
Sick man, had to watch in parts, got all kinds of shit going on this morning. But anyways it looks like a beast! Can't wait till you get everything dialed in. Specially the launch control!
Thanks for watching boss!👊
Just ordered this, hoping it's as good as I've heard.
💪 I don’t think ull be unhappy. The motor rips man 🤙
Awesome video bro! Your channel is going to grow fast!
Thank you for watching Michael! 💪 we’ll see how 2024 goes!🤙🚀
I've been waiting for you to drop this video. And like always you did a great job... Now I'll be counting the days until i receive my Fw11 motor. one note , you forgot to mention the Jetpack controller that Jordan is also selling for the Fw11 motor.
I put a scroll of that set up in when I introduced him. Thank you for watching!
There will be another video on the Vesc stuff as well. Can’t give it all away in one vid! 😂
@VoltronWatts . once again, it was a great review.
🙏
I just purchased this killer.. But i got the Sotion 270/660 AMP Controller.. for the fw11 i guess its a Fardriver,,, I little lost but what ii got coming ..Killed mY1020+ Have the Best Vids!! Make me feel not so bad being a older dude thats into this i got hooked quick,, I really enjoy your vids helpd me alot..!! Godspeed!!! Brother,, Now to go get my gear gona need it
Thank you for watching and commenting! Be sure to check out the Voltron watts and modified t razors for adults Facebook pages! 👊
@@VoltronWatts Oh boy its all together ! Ryan Is the BEST! helped me on lunch hour to get my app for android....ughhh...now to get a screen shot of whats on it when i BOnd it.. ? I had no room to mount my fardriver on my mx650 had remove gas tank...Have that Momomentum watts Batt 72 // 32ah..... im doin 11/72... Dirt moto.. Scared turn thison LOL...! plus gave me incentive go back to lifing again,,,!.. People are Amazed when i blow y them on whops out now where....lol!
Where in town is this riding area? I'd love to hit this up. Looks like fun riding!
This is in S. Austin. 🍻
Daaaamn bro. Glad you survived that new beast of a motor. Lol! So of course, where to buy this thing. Seems better than E&C.😮Love your channel and what you do. Keep it up brotha. 😁👍
Do you have a video on fine tuning this setup? I’m running FW11/ND72530/60v26ah right now and saving for the same size battery. Even with my setup this thing rips. Scares me on mode 3 100% wide open. I can only imagine with a 72v battery.
HOW TO Set Up Your Fardriver Controller for Razor, Surron, Talaria, CrazyCart, Segway and BombMoto!
ua-cam.com/video/aZgwL_7XMCg/v-deo.html
Id like to see a 13tooth on this motor and what speed you get
That would be cool 🤔
Planning to throw this motor on a shifter kart with 72v with 225 continous amps, im hoping it eats.
That shit is gunna rip bro! Get a controller that can utilize all the battery, maybe a fardriver 72680 or something 💪🚀
@VoltronWatts was thinking sotion motor, amorge custom battery and a far driver controller, the sotion one is a little too pricey for me lol
Did you do it?@@That_Stinger_GT5
1:06 but the real question is, who wins in a drag race? 😆
Love to see a video on this 🤙
🚀
Bro this is sooo sick I want one now😂
Yup! Wait till you ride one!
Lol man ive neen dbating between a sotion surron motor and swing arm or the fw11 for my 9 year olds bike that i will ride when he is not. Then you keep saying not for a kid. The flipsky i belive eforce said you can gave multiple tunes setup for say kid or mom or dad and you just click the profile for each rider
Yup, that’s why in the video I had in text “unless you turn the power down” I wouldn’t let my kid ride it. if you can control the power tho, then it doesn’t matter 👌 let em rip!
Excellent content man 👍
Thanks man!
Got it 😊 Thank you 🙏🏼
Anytime! 🫡
Do you think this would run good on the Kelly kvd from electro and co or should I just buy the ec4p? I love the power curve of the my1020 6kw but I burn them up too much. I mostly stunt don’t wanna extend the swingarm what’s your opinion
I have never ran the FW11 on the Kelly so I don’t have an opinion there thats worth a shit. 😂 I’ve seen many people run the EC4P on the Kelly successfully 🤷
@@VoltronWatts 💯💯
Good luck!
How did you order the amorge battery and with which cells do they offer and did you go with?
I order through email or WhatsApp. My batteries are 2170 lishen and Samsung 40t
Thanks for this video helps alot🔥
Any time man!
Where do I buy this kit ? And what's it cost ??
econiccycles.com/products/sotion-fw11-hall-sensor-motor-w-35-sprocket-11t
Discount code is “Voltron5” 💪
Well needed video 👍🏾👍🏾
Glad you liked it boss!!
Where can I get a t8f sprocket for the motor ?? Mine came with a 420
Try eforcemotorsandcontrollers.com
2:40 what would that effect? Just direction?
It would give the wrong signal if you’re trying to hook these up with different controllers. Not a big deal. Can be un pinned and changed per your controller connection
LETS GO!! 🤘
Thanks for watching!💪
My 12 year old son has the SX500 stock with no mods. If you had $1200 to upgrade what would you spend it on? Thank you! Erik from San Diego
Hey, Thanks for watching! I’d probably scoop a front fork, decent battery, fardriver controller and a motor upgrade
Where did you get your graphics from?
I get them from Christian Castro- find him on Facebook 🤙
hey can u tell me the name of those plastics?
The are the stock SX500 plastics
What swing arm and front fork do you have?
That thing looks so much more sick than the others
Electro and co front fork and E&C swing arm extensions ⚡️electroandcompany.com/VoltronWatts
Thanks man! I try to put together bad ass stuff 🚀
What rear brake will you recommend for a razor?
I run these
XLYZE 51mm Twin Piston Front Brake Caliper Pit Dirt Bike
@@VoltronWatts Thanks.
@Mattoutdoors. Np 🍻
Which is better ec4 or this new motor? Just your personal opinion.
I don’t think you can wrong with either man. 🚀
I think when it comes down to durability, the fw11 is going to take the cake. I've seen too many posts of snapped output shafts on the e&c
What rear rim and tire are you running on this bike?
It’s a stock SX wheel
Curious why not turn on the mph and gps setting in your GoPro ?
Great point. I will next time.
@@VoltronWatts not a knock. Just figured it would be a easy simple “add to” for the video footage. But I’m no expert
@ShotTheoryPB I didn’t take it as a knock at all! It’s a great thought! Thank you for suggesting 🤜🤛
how is the quality on the amorge batteries? and how did you buy it
Amorge batteries have been great and many more will say the same in the modified razor community. You can order them with a metal case now for $20 extra I believe. Good stuff 🤙
@@VoltronWatts how did you buy it? off alibaba?
How did you order and with which cells do they offer and did you go with?
If i use a 72v 32ah battery will it be fine with the ec4p motor and kelly controller or would it be too powerful?
What Kelly controller and what is your battery amp ratings?
@@VoltronWatts The e&c tuned KVD7212NX and the battery says Max Continuous Discharge Current: 200AMP
@Rippinandfishin that battery will be fine
@@VoltronWatts ok thank you. i’m trying to sell my gas dirtbike right now to buy all of it and i already have the mx650 hoping to do this build soon
@Rippinandfishin rock on man! If you buy from EC use winnerscircle at check out and save 5% on the order 👊
This long form format is cool for avid fans, but if you want to expand into most of the audience, a short form summary is what will really get you the clicks. I don't have 30 mins to sit and sift. I tried skipping and didn't catch any of the real world comparisons needed to make a decision.
Thanks for watching!
I disagree, the video was very helpful as it is. I like the vlog format more than a spoon feeding as it’s important to understand what and why before building out a $4000 motorcycle- it’s also a matter of safety!
@JeffKendallWeed thank you for your feedback! There is a time and a place for all of it I think
@@JeffKendallWeed hence, "not everyone has 30mins" of downtime. Keyword, "everyone".
100👊
Will it work on 16 and 17 inch wheels
Sure, just gotta be aware of proper gearing 👌
Is sotion working on a mototec motor?
I’m not sure
Thst chain looks a little sus a few hard spots in it
Yup. She need a little lube 😎
Man wish I ordered this motor I just order the 11k from electric co
That’s a great motor too!
Did you get a 0-30 time?
I do, I’ll have to look back through the data
@@VoltronWattsthank you! No rush
@wolfiedavis4879 🫡
@@VoltronWattsany updates?
At 35 mph my dirt tire feels like unbalanced i cant imagine 60 with dirt tires savage
It’s not a great feeling! 😆
Great video
Thank you for watching! 💪
🚀
🫡
Word ive gone on worse trails in mud up the the plastics on a cheap vevor motor
I’ve had great success with the Vevors. I love em for what they are 👍