What a relief when you said “man! That log is hard, it’s hard dry ash”. I was thinking geez this saw is taking a long ass time to get through there. But I take it back, I was just testing out an 020T that I’m playing with on a piece of hard dead ash as well. Boy was I thinking how dense this thing had become. Always a joy to learn more from you all. Sincerely 🤙
One of the best saws ever made. I’m lucky enough to own two and getting a third going again, and stupid enough to have sold a brand new one for next to nothing in 2012 before moving to Australia.
Great info, I got handed one of these about 2 weeks ago by a pal who climbs, I just tuned it and gave it back, he said it worked perfect for a whole day then acted up again so I stuck on an after market carb, it runs ok but When I tuned it cos I thought it rev'd too high, now I know different Thanks very much from Scotland
My lord I'm glad everybody in the family is good. Thats Most important. I know I'm not a big donater but I look forward to your videos more than anybody else's. I'm an old guy that loves knowledge about power saws. I'm a 288 xp guy and you do a lot of work on them saws. I've also got a 394 from 1998. It's non xp & I believe it's an EPA model. It's a case, carb & intake. Plus fuel tank and handle. Oh and a jug and piston. I'll be having questions once it warms up outside. Later
Howdy from snow covered North Dakota. Glad you keep the good content coming. Much rather learn tips from you than watch garbage tv. Thanks, keep it coming 👍
Always found with climbing saws with 1 bar nut, adjust the chain looser than you want it. When you tighten the bar nut fully it tightens the bar up a bit more. Always catches the now groundies out!
Nice little saw for a ATV accessory. Will be watching this build for sure. I have a couple old T-handle Terry's I'm going to go through and add to my collection. TC Mahalo Tinman🤙🤙🤙
Love the video my question is I have 3 200t's 2 of them are the new version an 1 older version how do I know what carburetor model to get for replacement thanks
Hey Tin man what company do you recommend to get my steel 038 magnum 2 ported and polished for cutting fire wood I would love to do it on my own but I don’t have time because I i’m still in high school and during the summer I will be fighting wildfires thank you so much for video’s keep doing what you are doing 👍
I have a husqvarna T435 top handle that i use for trail maintenance here on the west coast. I carry it on my back it will tackle up to 24" blowdowns. I would like to do some porting to it. Do you think it is worth it
Hey tinman I just picked up a homelite xl 925 super and was wondering where I can find parts like a cylinder, I can find a piston just not a cylinder. Any Leeds would be appreciated brother!!
Yeah and split it. The hardest I've ever been hit in my life. Bucked trunk block of ash in 0* weather on a splitter with knots...thing blew apart and hit me in the chin. Knocked me straight on my back
What a relief when you said “man! That log is hard, it’s hard dry ash”. I was thinking geez this saw is taking a long ass time to get through there. But I take it back, I was just testing out an 020T that I’m playing with on a piece of hard dead ash as well. Boy was I thinking how dense this thing had become. Always a joy to learn more from you all. Sincerely 🤙
Tin-man, I don’t even own a power saw and never used one in my life never mind fix em or modify them. Keep building the brand and growing the channel.
One of the best saws ever made.
I’m lucky enough to own two and getting a third going again, and stupid enough to have sold a brand new one for next to nothing in 2012 before moving to Australia.
Great info, I got handed one of these about 2 weeks ago by a pal who climbs, I just tuned it and gave it back, he said it worked perfect for a whole day then acted up again so I stuck on an after market carb, it runs ok but When I tuned it cos I thought it rev'd too high, now I know different
Thanks very much from Scotland
My lord I'm glad everybody in the family is good. Thats Most important. I know I'm not a big donater but I look forward to your videos more than anybody else's. I'm an old guy that loves knowledge about power saws. I'm a 288 xp guy and you do a lot of work on them saws. I've also got a 394 from 1998. It's non xp & I believe it's an EPA model. It's a case, carb & intake. Plus fuel tank and handle. Oh and a jug and piston. I'll be having questions once it warms up outside. Later
Howdy from snow covered North Dakota. Glad you keep the good content coming. Much rather learn tips from you than watch garbage tv. Thanks, keep it coming 👍
That’ll be a money maker for Hogan. Good to hear that Charlie is growing and doing well brother.
Always found with climbing saws with 1 bar nut, adjust the chain looser than you want it. When you tighten the bar nut fully it tightens the bar up a bit more. Always catches the now groundies out!
Nice little saw for a ATV accessory. Will be watching this build for sure. I have a couple old T-handle Terry's I'm going to go through and add to my collection. TC Mahalo Tinman🤙🤙🤙
Nice lil 200t i love mine. Hope ur weather is getn lil better.
Thanks. For the info! Will look into all of that, keep up the great info you put out! You an the family take care an stay safe!
We appreciate you making videos
Solids lol. It’s amazing how far it can make it up their backs lol.
Love the video my question is I have 3 200t's 2 of them are the new version an 1 older version how do I know what carburetor model to get for replacement thanks
Hey Tin man what company do you recommend to get my steel 038 magnum 2 ported and polished for cutting fire wood I would love to do it on my own but I don’t have time because I i’m still in high school and during the summer I will be fighting wildfires thank you so much for video’s keep doing what you are doing 👍
This is going to be a great build
Tho I'm no climber either, hope to own a 200t one day! Ahh NOS... the best kind of oem parts!
Johns customs saws ported one for guilty of treeson. Pretty sure they ran a 20inch bar on it. Could be a video to check out tinman
John is a scumbag. But yes a 20in panther conversion they put on it
Its called the limb reaper. 20in panther bar
Do you know what carb PN/rev has worked best in your experience? The 200T has had many.
Smashing that like button!! Tin man rocks
With ya buddy!
I help the most
I have a husqvarna T435 top handle that i use for trail maintenance here on the west coast. I carry it on my back it will tackle up to 24" blowdowns. I would like to do some porting to it. Do you think it is worth it
I say try porting it for sure
Comment from The Coolest Guy 😎 on the Planet
Are Oem oil pumps worth it for Stihl or do I save a few bucks and by the cheapie? Only for a limbing saw ms250. Opinion anyone?
It's a crap shoot..some aftermarket pumps work some dont.
Go with the oem
Definitely go OEM. What's the question about the MS250? I love those little guys. It doesn't take much to turn them into a real Monster.
Hey tinman I just picked up a homelite xl 925 super and was wondering where I can find parts like a cylinder, I can find a piston just not a cylinder. Any Leeds would be appreciated brother!!
Check out Leon's chainsaw parts and repairs (youtuber). He is a huge homelite saw guy.
@@tdawg8605 that's funny I was literally just watching one of his videos, thank you for the info it's appreciated!!
😎❤️👍
I. WANT one!
Question is a echo cs-670 in running condition worth $100 ?
I like those saws.
Heck yea they are cool guy
Could you not “replicate” the timing “style” that the 200T has on other saws?
First!!!!
A 200T should be turning at least 14,500..
If you've never tried to cut frozen wood you just don't know
Yeah and split it. The hardest I've ever been hit in my life. Bucked trunk block of ash in 0* weather on a splitter with knots...thing blew apart and hit me in the chin. Knocked me straight on my back
We missed you yesterday Tinman! Was anything wrong?🫶