Bit of advice, you should always clean off the old parts you are refitting you may have shortened the life a little by allowing all the dirt/rust to get on the damper which will in turn damage the internal seals.
Yep, I'm aware of them. The previous owner of my car bought some bits from them which are still on the car - induction kit and a few other bits. Details in my previous video if you're interested!
Thank you for the very interesting and well made video! I'm currently facing the same problem, but I'm a bit confused by the Suzuki parts catalogue, it states that sport and standard struts are different, including the bump stop and top mounts. However there is only one version of Bilstein shocks available, which is supposed to fit all Swifts, so I'm wondering what the difference might be? 🤔
A proper upgrade for stock ride height would be b6 shocks, b4 as you correctly stated are oem spec replacements, tbf whatever you put on will be an improvement over worn original shocks👍
Hi guys! Just to clarify: B4 >oem substitution ( more quality component) B6 > no height modifications (for oem springs) but improved ride specs ( more sporty) B8 > for lowering springs, sporty ride specs I Just bought a B12 kit ( B8 + eibach springs), hope to have a big improvement and quality ride 🤞🤟
@@Jazda ah ok thanks for clarifying. Just looked like during the video, as they were unboxed, it was all pre built with dust boots etc. I'll look at buying some separately in that case.
I changed my rear shocks and now theres a rattle at the back of the car over uneven surfaces….everything is done up tight so i have no idea where the rattle is from…but its only started since changing the shocks…..anyone have any idea what might be causing it?
@@Jazda all tight, i’m a bit heavy handed so i suspect they are actually a bit over tight…i can’t figure out what the issue is…i’ve had them off, put them back on, made sure everything is put on in the right order. I even bought a different set of shocks because i thought the originals might be faulty but the sound is still there no matter what i do
@@Jazda just to add a bit more detail, i have also changed the whole rear beam axle…i did this after changing the shocks, they rattled with the old beam axle and they still rattle with the new one so its not related to the whole axle / hub assembly. Its definitely something else.
Cool interesting content as usual love the stop motion style removal of the parts. Havent a clue how you did it but looks very cool!👍
Bit of advice, you should always clean off the old parts you are refitting you may have shortened the life a little by allowing all the dirt/rust to get on the damper which will in turn damage the internal seals.
Good point. Thanks.
Obrigado, ajudou na minha decisão para mudar os meus amortecedores
Great video, about a very under rated car.
There is a company in England who does tuning parts for your car.
Might be worth a look ...
Yep, I'm aware of them. The previous owner of my car bought some bits from them which are still on the car - induction kit and a few other bits. Details in my previous video if you're interested!
Thank you for the very interesting and well made video! I'm currently facing the same problem, but I'm a bit confused by the Suzuki parts catalogue, it states that sport and standard struts are different, including the bump stop and top mounts. However there is only one version of Bilstein shocks available, which is supposed to fit all Swifts, so I'm wondering what the difference might be? 🤔
Not sure about standard Swifts to be honest, but the B4 seems to match the OEM Sport's damping.
Great videoography, must have taken an age for the timlapses
Wasn't too bad. First time doing it, so learned that I was moving too much and need more increments/photos to look smoother.
just want to know which site did you buy them on for the set SHOCK ABSORBER please can you let me know thank you
Auto-doc
Lovely editing! How's the car been doing? Underside looks better than I expect (yes I'm thinking of getting one now)
Been loving it. It's a great all rounder and I'll be keeping it for another while for sure. It's averaging 49.2mpg which is mental 😳
A proper upgrade for stock ride height would be b6 shocks, b4 as you correctly stated are oem spec replacements, tbf whatever you put on will be an improvement over worn original shocks👍
Yep. I was aware of that option but I didn't want a firmer ride and the B6 cost over double the price!
Hi guys!
Just to clarify:
B4 >oem substitution ( more quality component)
B6 > no height modifications (for oem springs) but improved ride specs ( more sporty)
B8 > for lowering springs, sporty ride specs
I Just bought a B12 kit ( B8 + eibach springs), hope to have a big improvement and quality ride 🤞🤟
@@federicoperra3863 what's the part number for B6's that fit the Swift? I have 2017 sport 2nd gen
@@kevinarturomoraleslopez7715 check bilstein web catalogue,insert your vehicle data and you can find updated spare parts code.👍
Hi, Did the rear struts come with dust boot, bump stop and top mounts? Thanks
As far as I remember, no. Here's where I bought them: www.auto-doc.ie/bilstein/631774
@@Jazda ah ok thanks for clarifying. Just looked like during the video, as they were unboxed, it was all pre built with dust boots etc. I'll look at buying some separately in that case.
Had a zc32s aswell loved it but the clutches are terrible
No issue with mine - it's quite light and accurate. What was wrong with yours?
When they took changed the clutch there was another thing that would seize and end up waiting 6 weeks for
why you just dont clean it while you at it, those hard mud.
It's protecting the plastic wheel liners.... and I'm lazy 😆
I changed my rear shocks and now theres a rattle at the back of the car over uneven surfaces….everything is done up tight so i have no idea where the rattle is from…but its only started since changing the shocks…..anyone have any idea what might be causing it?
Have you checked that all bolts/nuts are still tight? Might have loosened with the vibrations maybe?
@@Jazda all tight, i’m a bit heavy handed so i suspect they are actually a bit over tight…i can’t figure out what the issue is…i’ve had them off, put them back on, made sure everything is put on in the right order. I even bought a different set of shocks because i thought the originals might be faulty but the sound is still there no matter what i do
What shocks did you use?
@@Jazda just to add a bit more detail, i have also changed the whole rear beam axle…i did this after changing the shocks, they rattled with the old beam axle and they still rattle with the new one so its not related to the whole axle / hub assembly. Its definitely something else.
@@Jazda the same ones as in the video, Billstein B4