I absolutely love the sharp edge on the back end of the trunk at the top before going down the back. But if I had the money I would pay to have the front end have a top forward slant instead of the current top backward slant. And I'd change the wheels and tires to something more retro.
While the 6.1 is a beast of a motor even in stock form it just doesn't sound like the 5.7. I don't know what it is but the 5.7 has that old school raspy sound, and the only motor that comes close to it is either the ls2 or the ls3. Nonetheless the 6.1 was built to be a performance motor, no doubt about it.
Bravo 👏 Sir what would I have 2 do get to that but on my 07 Chrysler Aspen 5.7 I'm slowly working on n the shop get work done I just got a 6.1 intake manifold with the TB not install like 2 get my engine rebuilt build by April
For a 5.7? I don’t believe that they make a 426 stroker kit for the 5.7. You would have to get a 6.1 block or 392 block and start there. Then throw a bunch of money at it. Bore and clearance the block, port and polish the heads, intake and TB, custom valve job, get a custom grind cam, high compression, transmission work. And then still not done. Just being real.
Basically, yes. The only thing that’s been done to it was an upgraded valve body and a 3000 stall converter. All hard parts are stock. It was never taken apart. That is next on my list though.
Captain Obvious the stall converter allows the engine to rev up before engaging the transmission. It allows for better acceleration by allowing the engine to be in the optimum power range.
I actually like the Chrysler 2.7 engine they should have never put them in such a heavy car though but In a stratus or Sebring they were peppy. And its unfortunate they had so many problems for the size of engine they were they were powerful.
Well the wheels are supposed to offset the car. That’s the whole point. The yellow fog lights are a throwback to old school muscle cars. And yes, the car sounds bad as fuck. Thanks.
@@WATCHTHISSHITCARCLUB yeah I do agree, I understand it now. I’m too the point if I have a red car it’s red rims, white car on white rims. It’s always black wheels smh
@@TyB-BT gotta switch it up. Stand out from the crowd. Don’t do what everyone else does. Everyone supercharges their cars, so I built a monster naturally aspirated motor. I do what I want. Not what everyone else thinks is cool. I love everything about this build so far. More to come too.
Lengthening the up and down motion of the piston by way of a crankshaft with longer throw. Your total displacement is bore diameter of the piston x length of stroke of the piston up and down in the bore x number of cylinders
For more recent updates and pictures check out my Instagram account @na_stroked300srt
thats a bad ass popcorn machine.
Super sounding Mopar! Love the plate.
damn, Walter White had a great taste on cars
That is badass!! Very well done
Thank you!
Bruh dats gangsta asf
REAL D thank you!
If you blacked out those chrome pieces it’d look a lot more menacing, awesome build thoug
Now that sounds nuts! Nice Car! Cheers
Thank you!
I absolutely love the sharp edge on the back end of the trunk at the top before going down the back. But if I had the money I would pay to have the front end have a top forward slant instead of the current top backward slant. And I'd change the wheels and tires to something more retro.
Sounds mean as AF indeed. Love it!
Thank you
When I came to America i fell in love with Chrysler 300 so much I went to go buy one I forgot to check if it's hemi ,THE EXCITEMENT 😁💀😭
Omfg
Omg
Love the sound
Beast 🔥🔥🔥❤️💪300GANG🙌
While the 6.1 is a beast of a motor even in stock form it just doesn't sound like the 5.7. I don't know what it is but the 5.7 has that old school raspy sound, and the only motor that comes close to it is either the ls2 or the ls3. Nonetheless the 6.1 was built to be a performance motor, no doubt about it.
Bravo 👏 Sir what would I have 2 do get to that but on my 07 Chrysler Aspen 5.7 I'm slowly working on n the shop get work done I just got a 6.1 intake manifold with the TB not install like 2 get my engine rebuilt build by April
For a 5.7? I don’t believe that they make a 426 stroker kit for the 5.7. You would have to get a 6.1 block or 392 block and start there. Then throw a bunch of money at it. Bore and clearance the block, port and polish the heads, intake and TB, custom valve job, get a custom grind cam, high compression, transmission work. And then still not done. Just being real.
What kind of power was this making? I'm gonna take a wild guess and say 520whp if N/A, and near 700whp if boosted.
It is n/a and makes more than your estimate.
@@WATCHTHISSHITCARCLUB well dont be shy. Whats it make.
@@WATCHTHISSHITCARCLUB 850wph??
@@WATCHTHISSHITCARCLUB I say 575whp 👀
do you still own this beast?!
Loving the "broke man's Rolls-Royce" my brother ! 😁
This will beat a rolls royce 🤡
Not unless it's faster than a V12 AWD engine that's producing over 591+hp...🤡
I make well over 591hp 🤣
Good for you bruh....😏
@@WATCHTHISSHITCARCLUB Bruh this duck on here hating like he's driving either one lmao. Probably driving a civic or some shit 🤣🤣foh your not cool lame
What cam do you have in it? I’m doing the same with my car and want a similar sound
Jacob Spangler it’s a custom grind cam.
What a beast
Thank you 🙏🏻
What is your setup? I would love to replicate that!
Sweet Ride
Thank you!
How much?
Bad AZZ 👊💯🔥👌
Sweet Jesus man
Where did you get your kit from and what cam are you running
It’s not a “kit”. Everything was purchased separately. My cam is a custom grind. Not something off the self.
Beast😎🔥🔥
LINDO CARRO O RONCO E ANIMAL
Thank you
What kind of muffler is those
Jose Guerrero It’s all Mopar performance (Corsa) exhaust.
WATCHTHISSHITCARCLUB where did you find those exhaust system
@@joseguerrero8550 corsa
Tank
Say my name
What kind of rims
Juan Castillo Velgen
Is this the stock nag1 transmission
Basically, yes. The only thing that’s been done to it was an upgraded valve body and a 3000 stall converter. All hard parts are stock. It was never taken apart. That is next on my list though.
@@WATCHTHISSHITCARCLUB what does the stall converter do?
Captain Obvious the stall converter allows the engine to rev up before engaging the transmission. It allows for better acceleration by allowing the engine to be in the optimum power range.
@@WATCHTHISSHITCARCLUB sweet, I gotta get one for mine
Beatn and Bangn!!!
What size rear tire an rim offset?
Tony Koelsch the rear tire is a 315/35r20 on a 20x10.5 et 25 Velgen VMB5 in satin bronze.
@@WATCHTHISSHITCARCLUB looking at putting demon reps on my 09 eagle 300c... Any rubbing? I may go 295
Tony Koelsch no rubbing.
Tony Koelsch same just curious to see how they look on a 300
Sic ❤🔥🔥🔥🔥🔥🔥🥰👌🙏
This could be my 300C...but its a 2,7 V6 ;(
I actually like the Chrysler 2.7 engine they should have never put them in such a heavy car though but In a stratus or Sebring they were peppy. And its unfortunate they had so many problems for the size of engine they were they were powerful.
Rims don’t match anything about the car, and the yellow fog lights??? Other wise, this car sounds so fucking good I cannot even explain.
Well the wheels are supposed to offset the car. That’s the whole point. The yellow fog lights are a throwback to old school muscle cars. And yes, the car sounds bad as fuck. Thanks.
@@WATCHTHISSHITCARCLUB I’m talking the color of the wheels, black/chrome woulda looked good, now that “brown”
@@TyB-BT lol, it’s not brown. It’s satin bronze. I had black. Everyone has black on black. Be different and stand out.
@@WATCHTHISSHITCARCLUB yeah I do agree, I understand it now. I’m too the point if I have a red car it’s red rims, white car on white rims. It’s always black wheels smh
@@TyB-BT gotta switch it up. Stand out from the crowd. Don’t do what everyone else does. Everyone supercharges their cars, so I built a monster naturally aspirated motor. I do what I want. Not what everyone else thinks is cool. I love everything about this build so far. More to come too.
From 3k per litre it’ll drop down to 1😂😂 faced that shit
What? That shit doesn’t even make sense
Um so no rev= no testies
Michael Howard yeah because I can rev it while filming. Dumbass.
@@WATCHTHISSHITCARCLUB 😂😂😂
Mopar or no car !!
A 300 with a body kit
What? No body kit here. It’s an SRT8.
7L крутяк
Мне нравится
what is stroker?
Cams and valves usually most people do springs and rockers since it's already apart
Lengthening the up and down motion of the piston by way of a crankshaft with longer throw. Your total displacement is bore diameter of the piston x length of stroke of the piston up and down in the bore x number of cylinders
@@calebdodd2559 You have no business talking about cars lmao
Caleb Dodd way wrong. Don’t answer if you don’t have a clue.
@@calebdodd2559 come back and face the music Caleb you can't hide forever
Sorry
Spund bad