only thing was they had to weld on a small 2.5 diameter piece on both sides since the stock pipe is 2.75. Other than that I haven't had issues. However, after listening to some of the cruising footage here multiple times, I found an exhaust leak, but it wasn't from the welds of the flowmaster, nor the new magnaflow cat. The foil type exhaust manifold gasket has a minor leak and you can actually hear it around the 3:57 mark when I'm driving through the downtown area. The gasket was from a cheap kit from ebay. Pretty funny, I bought a better multi-layered steel gasket, but haven't installed it yet. Thanks for watching 🤙
@@FranciscoJavierOutdoors oh okay i was just wondering because ima buy the flowmaster 40 and need to know what i need so it can fit so it’s gonna need 2.5 diameter pipes on both sides then so it can fit?
@@Salomon-r6m yeah I was going to cut and clamp it myself, but decided to go the weld route through this shop. I was going to get the 2.5 ID to 2.75 ID adapters to clamp it on, but they're kind of hard to find. If you're welding, small pieces of 2.5 will help transition from the stock 2.75 to 2.5 that's on the flowmaster inlet. For the outlet, gonna need about 2-3 feet of 2.5 since the flowmaster is much shorter than the stock muffler, gonna have to compensate that space with an additional 2+/- feet maybe of 2.5. If that makes sense
@leomarmason I like it man, but ain't going to lie it is a little loud. I have a f150 with the 5.0, it also has a flowmaster, but still has a resonator. The drone on the v8 isn't as obnoxious as the i6, maybe cause of the tone of the v8 is deeper? Other than that the revs sound awesome and at cruising speeds it also sounds great, but when getting up to speed like on the highway there's no getting away from thay drone, just put the music very loud haha. Thanks for watching
Is this in Brownsville?
yessir
Can’t beat the sound of an in-line 6
I had a 2006 4.2 with a magnaflow and it sounded alot meaner than that. Almost sounded like a GTR.
that's badass! this shop only had flowmasters so i decided to go that route, i like the tone of it.
Eso es todo carnal ya me di cuenta de.onde eyes somos de onde mismo saludos feliz navidad y Felix año nuevo
Gracias carnal! Que tengas felices fiestas también!
Que escape es ese hermano?
@@JesusEduardo-o1r flowmaster 40
I put duals on mine runs great
i actually considered a dual set up too, but decided to go this route in the meantime. thanks for watchig
💪🏾💪🏾💪🏾💪🏾
Thanks for watching 🤙
sounds like a 1JZ VVT-i
i have a 2006 trailblazer ls 4.2l i like the sound a lot do you remember the parts # with flow master i been thinking about upgrading myself
I dont remember the part #, but its the Flowmaster 40 series. Thanks for watching
How much did it cost (individually)
so did the flowmaster fit with no issues?
only thing was they had to weld on a small 2.5 diameter piece on both sides since the stock pipe is 2.75. Other than that I haven't had issues. However, after listening to some of the cruising footage here multiple times, I found an exhaust leak, but it wasn't from the welds of the flowmaster, nor the new magnaflow cat. The foil type exhaust manifold gasket has a minor leak and you can actually hear it around the 3:57 mark when I'm driving through the downtown area. The gasket was from a cheap kit from ebay. Pretty funny, I bought a better multi-layered steel gasket, but haven't installed it yet. Thanks for watching 🤙
@@FranciscoJavierOutdoors oh okay i was just wondering because ima buy the flowmaster 40 and need to know what i need so it can fit so it’s gonna need 2.5 diameter pipes on both sides then so it can fit?
@@Salomon-r6m yeah I was going to cut and clamp it myself, but decided to go the weld route through this shop. I was going to get the 2.5 ID to 2.75 ID adapters to clamp it on, but they're kind of hard to find. If you're welding, small pieces of 2.5 will help transition from the stock 2.75 to 2.5 that's on the flowmaster inlet. For the outlet, gonna need about 2-3 feet of 2.5 since the flowmaster is much shorter than the stock muffler, gonna have to compensate that space with an additional 2+/- feet maybe of 2.5. If that makes sense
Since you been driving with it for a minute how do you like it? How’s it on the highway?
@leomarmason I like it man, but ain't going to lie it is a little loud. I have a f150 with the 5.0, it also has a flowmaster, but still has a resonator. The drone on the v8 isn't as obnoxious as the i6, maybe cause of the tone of the v8 is deeper? Other than that the revs sound awesome and at cruising speeds it also sounds great, but when getting up to speed like on the highway there's no getting away from thay drone, just put the music very loud haha. Thanks for watching
@@FranciscoJavierOutdoors appreciate you taking the time out to reply thank you!
Dang, too much drone!!
Peak brown invader. Hit the auto zone chrome next