Peerless 1000 right angle drive refresh for racing

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 28

  • @greatsouthernfpvrc3322
    @greatsouthernfpvrc3322 Рік тому +1

    This really help with the decision on how to set up my mower thank you 💪

  • @tigattac
    @tigattac 2 роки тому +1

    Very informative videos, and very well explained, Bazza. I think it is possible to make this from an old outboard engine gearbox. Then you get reverse also. Cheers from Norway

  • @robertsachse128
    @robertsachse128 6 місяців тому

    Hey thanks for making this video. I'm in the USA do you know where I can find replacement gears and bearings to do a rebuild. The unit I have is in very poor condition. Thanks in advance.

    • @bazzasgarage1922
      @bazzasgarage1922  6 місяців тому

      I think you mower shop should be able to get parts.

  • @andysummers1033
    @andysummers1033 3 місяці тому

    What RPMs are you running through them with oil rather than grease?

    • @bazzasgarage1922
      @bazzasgarage1922  3 місяці тому

      I have never had one fail so far unsure how fast they could go .

  • @stuartlee4698
    @stuartlee4698 2 роки тому

    Gazza, I’m trying to rebuild one of these, I can get a rebuild bearing kit off Trademe. On the output shaft the bevel gear fell off like your bench thump, but the inner bearing is still stuck in the housing, thumping won’t get it to drop out like yours did. So can I just pound on the output shaft down and out or is there another circlip holding it in ??

    • @bazzasgarage1922
      @bazzasgarage1922  2 роки тому +1

      Can you add a photo as I don't quite follow which bearing you are talking about.

    • @stuartlee4698
      @stuartlee4698 2 роки тому +1

      It’s OK, I removed the big dia circlip under the seal on the output shaft and then was able to extract everything. Cheers.

  • @zykotic6649
    @zykotic6649 Рік тому +1

    Super useful and also very rare to find a video like this thank you so much, will I be able to put 18 horsepower through a mower if I use this method you have done?

    • @bazzasgarage1922
      @bazzasgarage1922  Рік тому

      Yes you can!

    • @zykotic6649
      @zykotic6649 Рік тому

      @@bazzasgarage1922 thank you! Also was going to ask if I can run any type of gear oil if it’s high synthetic or does it have to be a certain type

    • @bazzasgarage1922
      @bazzasgarage1922  Рік тому

      @zykotic6649 I recommend a EP 90 oil as if the seals or shafts are worn it may not leak .

  • @JCMODS6969
    @JCMODS6969 2 роки тому

    ive never had one of those peerless 1000 do they hold up to abuse like clutch dumps and things

    • @bazzasgarage1922
      @bazzasgarage1922  2 роки тому

      I have not had a problem and i have run them for a few years.

  • @dodge2460
    @dodge2460 2 роки тому

    Hey man ive been having a look around and have not been able to find a t drive or right angle gearbox for a reasonable price any chance you could point me in the right direction, thanks

    • @bazzasgarage1922
      @bazzasgarage1922  2 роки тому

      Where about are you from. I can help with stuff in NZ but not sure about other countries.

    • @dodge2460
      @dodge2460 2 роки тому

      @@bazzasgarage1922 im located in queensland australia

    • @bazzasgarage1922
      @bazzasgarage1922  2 роки тому

      @@dodge2460 try somthing like this www.aliexpress.com/item/1005004377976475.html?_randl_currency=NZD&_randl_shipto=NZ&src=google&src=google&albch=shopping&acnt=494-037-6276&slnk=&plac=&mtctp=&albbt=Google_7_shopping&albagn=888888&isSmbAutoCall=false&needSmbHouyi=false&albcp=9444695485&albag=99457316601&trgt=1459734606882&crea=en1005004377976475&netw=u&device=c&albpg=1459734606882&albpd=en1005004377976475&gclid=CjwKCAjw-rOaBhA9EiwAUkLV4o_wB9j_4BLuGTlYxW9TGIAhlQbY82BB2XnCIXze3iTKDliFE_YPjRoCf94QAvD_BwE&gclsrc=aw.ds&aff_fcid=88e10dd4ab8c4c88bec2ca6061e684ba-1666041379540-09966-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=88e10dd4ab8c4c88bec2ca6061e684ba-1666041379540-09966-UneMJZVf&terminal_id=e8a897cf57b041ba9d67d0f952e0879c&afSmartRedirect=y

    • @corbanwoods2254
      @corbanwoods2254 Рік тому

      @@bazzasgarage1922 Hi, I'm located in NZ do you have any sources for getting peerless right angle gear boxes?

    • @bazzasgarage1922
      @bazzasgarage1922  Рік тому +1

      @corbanwoods2254 No sorry right angle drives new are about $600. I know a contact for T drives like what I put in the kingkat build.

  • @user-ltnwl0os3v2rr1m
    @user-ltnwl0os3v2rr1m Рік тому

    👍👍👍

  • @gennyshovel1
    @gennyshovel1 2 роки тому

    Bazza, does it matter if either shaft becomes the driven shaft (opposite to what this one is used) , I might have a few more questions for you soon - Tiny -

    • @bazzasgarage1922
      @bazzasgarage1922  2 роки тому +1

      I dont think so , you would have to check the lubrication of the bearings if you changed orentation.

  • @veroryangao-zt3zo
    @veroryangao-zt3zo 4 місяці тому

    comment from PNG

  • @andyg3
    @andyg3 8 місяців тому

    quite annoyed right now, this is perfect for a project i need, but abolsutely no luck finding one here in the uk.

    • @bazzasgarage1922
      @bazzasgarage1922  8 місяців тому

      They are fitted to walker mower decks. You may be able to find on an old mower deck.