😂. I just spent 3 hours diagnosing vacume leak on my E-39, washed up and first thing on my UA-cam recommendation was this. Not inspiring at all :)))). 😂. By the way, I think you just busted the greatest myth that N54 is a sensitive engine. It does have crappy cooling system but it is a legend. Most importantly, this is the last engine I can perform most of the work simply following your instructions. It's been 5 years now and you guidey me though all the repairs from radiator change (did twice) to picking right O-ring for my DESA Valve. Thank you Nathan!!!
This channel is going down hill right now something needs to be done quick. Or else this guy is going to waste all his money on scratch off tickets and blow up all his engines.
What a stupid idea Nathan ! And the worse thing is that I frikking loved it 🤣 specially when you tried to start it again LOL - Your videos definitely inspire me - GOOD Job
Strong engines! Shame it couldn’t have been saved in another way. Would you ever pull one, put it on a stand and rebuild it? Would that make a good video? How about a 7 series from 94-2001, E38 car rebuild video series? Appreciate what you do!
I have a question. No one knows the answer, but I figured you would know because you know everything lol. I have a bmw m6 f13. My oil temp gauge and digital readings in the secret menu are fluctuating, even when idling. Is there something wrong with the sensor or thermostat? The car doesn't overheat or take forever to warm up. The needle just jumps around a bit ( engine oil jumps around from 93-98ish C) should I be concerned? Thanks man P.s Car is a 2013 with 19k miles just had oil change and no codes
So how are the legendary BMW inline sixes super repiable? I don't get it. I reaaly love what BMW has but I need reliability too. Conaidering E39 or E46 coupes first.
B.M.W. was built on that inline 6 .. Its a bullet proof engine that will run forever.. maintain it like you would any other car and do your own work. We know what all the common issues are but thats not a problem.. If your a I take my car to the dealer kind of person make sure you have a fat bank account.. I love my E46 ....
Whenever someone says, "the engine blew up", I picture parts and shrapnel flying everywhere. So, you were angry at the engine and decided to finish it off? It ran well, until the end.
Hey Nathan, how do ya feel about taking a vacation to Maui & helping me get my no crank / no start e91, running? Not joking, let me know if you wanna know more. I'd cover cost of flight & give you a place to stay!
OUCH!! If you spend the time and put the care into your straight 6 like I do you can’t help but feel bad for that engine. Reminds me as a teen trying to blow a 198”’s Mazda trunk engine with no oil in it. Didn’t seize.
Nathan, you set my car on fire. Now I’m in mourning. Now I see what you and Phil have been doing while gone. That goo coming out of the motor definitely isn’t good. What are you going to set on fire next? Hahaha that was funny
@@NathansBMWWorkshop oh damn Nate sorry I didn’t know. Got all these changes happening. Well, hope all is well. People are giving grief for blowing this thing up Jesus. It’s your broken car. You can do with it what you want. It let you some after all your hard work. I remember when you put all new interior in it. Everything ok with you guys? Or did hd leave on good terms?
I also have a 325XI it’s a 2003 , lately been having issues with cold starts . I’ve watched your videos about the different troubleshooting and does make sense how so many things can trigger it, I changed the plugs , maf and the small vacuum line from the front that leads to the back of the engine into pcv ,That’s it right now . I appreciate your content 💯. Thank you 🙏
So you probably wasted an I-6 that may have been salvaged because, "...it isn't worth the time...?" For clicks? Really? Your channel was useful years ago, now, not so much.
I watch your channel to see you fix BMWs, not to watch you intentionally trash them. You probably ruined plenty of parts other people would have really wanted with this horseplay nonsense. Just wasteful all the way around.
Obviously the mindset going into this video was “if i can’t use it, nobody can”. And i feel him, this brand is very infuriating and irritating to work with
Guy dissapears for months and comes back to set fire to a bmw straight six engine.
😂. I just spent 3 hours diagnosing vacume leak on my E-39, washed up and first thing on my UA-cam recommendation was this. Not inspiring at all :)))). 😂.
By the way, I think you just busted the greatest myth that N54 is a sensitive engine. It does have crappy cooling system but it is a legend. Most importantly, this is the last engine I can perform most of the work simply following your instructions. It's been 5 years now and you guidey me though all the repairs from radiator change (did twice) to picking right O-ring for my DESA Valve. Thank you Nathan!!!
N54? that's the M54
that m54 deserved better.. this is indeed clickbait and lame
Sad to see an e46 die like this. That aux cooling fan tried so hard. I'm sure someone could have done something with it. What a waste 🥲
Exactly
I saw the fan trying hard... i cried a bit.
You can’t let this channel die
This channel is going down hill right now something needs to be done quick. Or else this guy is going to waste all his money on scratch off tickets and blow up all his engines.
Hey Nathan before you scrap it I would like to buy some of the parts and body panels for my project E46
Its already gone
Great to see you back.
fire is a serious thing .. Just watching the video now.. broke my heart watching you destroy that engine.
kinda deserved it tho it took all his dough
@@BmwMe-uh9sy feel the pain.. lots of good e46 parts could have scavenged.
@@storytimewithunclekumaran5004 its goin 2 scrapyard
wonder how long it would have run with coolant mixed in oil. My 1984 honda accord in college ran for years like that.
Not long
I was just saying I have not seen Nate in 3 months. Awesome to see a new video.
What a stupid idea Nathan ! And the worse thing is that I frikking loved it 🤣 specially when you tried to start it again LOL - Your videos definitely inspire me - GOOD Job
Strong engines! Shame it couldn’t have been saved in another way. Would you ever pull one, put it on a stand and rebuild it? Would that make a good video? How about a 7 series from 94-2001, E38 car rebuild video series? Appreciate what you do!
I agree bring in the 7 series to this channel.
any BMW that gives any indication of blown head gasket? The heads cracked,
I have a question. No one knows the answer, but I figured you would know because you know everything lol. I have a bmw m6 f13. My oil temp gauge and digital readings in the secret menu are fluctuating, even when idling. Is there something wrong with the sensor or thermostat? The car doesn't overheat or take forever to warm up. The needle just jumps around a bit ( engine oil jumps around from 93-98ish C) should I be concerned? Thanks man
P.s Car is a 2013 with 19k miles just had oil change and no codes
So how are the legendary BMW inline sixes super repiable? I don't get it. I reaaly love what BMW has but I need reliability too. Conaidering E39 or E46 coupes first.
So it didn't blow up heh?
You can rely on the fact that the head gasket will be what puts it in the salvage yard. 4500$ to replace just the gasket
@@Truthseaaker Thanks, but you would just buy the one in good condition, the prices wouldn't be that high where I live anyways.
B.M.W. was built on that inline 6 .. Its a bullet proof engine that will run forever.. maintain it like you would any other car and do your own work. We know what all the common issues are but thats not a problem.. If your a I take my car to the dealer kind of person make sure you have a fat bank account.. I love my E46 ....
Wish I lived close to you or your scrapyard. I need a pair of 04 325 front fenders
Whenever someone says, "the engine blew up", I picture parts and shrapnel flying everywhere.
So, you were angry at the engine and decided to finish it off? It ran well, until the end.
I would’ve just found another cheap used motor and put it in but that’s just me
Always a pleasure.
Why?
FIRST!!! Missed you Nate…
In the name of science ... at least now we know what happens. What rpms was it at?
Hey Nathan, how do ya feel about taking a vacation to Maui & helping me get my no crank / no start e91, running? Not joking, let me know if you wanna know more. I'd cover cost of flight & give you a place to stay!
hows the price of B.M.W. parts in Maui ??
@@storytimewithunclekumaran5004 I haven't bought anything locally as of yet. First bmw :)
@@kalani777 oh well the internet is probably your best friend ..
@@storytimewithunclekumaran5004 haha, true : )
M54 are tough little motors
Hmmm, i wonder if it was the head gasket???
Probably
I'd love to see him do the to his Porsche
We are doing the cayman M97 $10k engine next 😂
Better get on them scratch tix! 💥👊
… “took the cams out, everything seems tight ”…That’s what ShE said 🤪👀😎!!
Why would you do this? It’s so painful to watch. And you’re polluting
cuz its goin to the scrapyard anyway im assuming he wanted some revenge on it cuz of the engine situation
OUCH!! If you spend the time and put the care into your straight 6 like I do you can’t help but feel bad for that engine. Reminds me as a teen trying to blow a 198”’s Mazda trunk engine with no oil in it. Didn’t seize.
I understand about the M5 contents all been done... always good content Nathan you got my subscription for whatever you do next
Was this an assisted suicide? 😂😂😂
Yep what a waste of time
I would have made one last ditch effort and tried Bar's Leaks Block Seal Head Gasket Sealant.
I cant believe its not locked up after
Bale.!!! aok memunoh mesin gitu je yek.. sedih 😢 koi..
What a horrible way to die. RIP
Can't believe it lasted 3 minutes
Nathan, you set my car on fire. Now I’m in mourning. Now I see what you and Phil have been doing while gone. That goo coming out of the motor definitely isn’t good. What are you going to set on fire next? Hahaha that was funny
That was my cousin in the video not phil , phil dont work here anymore , glad you liked the video
@@NathansBMWWorkshop oh damn Nate sorry I didn’t know. Got all these changes happening. Well, hope all is well. People are giving grief for blowing this thing up Jesus. It’s your broken car. You can do with it what you want. It let you some after all your hard work. I remember when you put all new interior in it. Everything ok with you guys? Or did hd leave on good terms?
Epic return video Nathan!
Looks older 2003 2002
bravo
Nice. Should've pulled a Neutral Drop and poured bleach and Starburst and nails into the engine for some extra pizzazz.
Its LS1 time.
Hate to see that happen to a decent car but a burn down vid is always good!
Then we took a railroad tie and smashed it through a windshield
Why not just give it away?
R.I.P.
I also have a 325XI it’s a 2003 , lately been having issues with cold starts . I’ve watched your videos about the different troubleshooting and does make sense how so many things can trigger it, I changed the plugs , maf and the small vacuum line from the front that leads to the back of the engine into pcv ,That’s it right now . I appreciate your content 💯. Thank you 🙏
btw once it’s at temp it runs correctly
@@djceazzaleanno you check your crank sensor?
I did that in 1968 on an old shitbax so funny
That was sad. 😫
Awful
Waste....😢
Great job 🤣
Melt plastic
I would say that’s a win in my book
Waste of a wonderful motor unfortunately and a waste of 12:08 inclusive the silly ad
Thanks but NO Thanks.... UNSUBSCRIBING .... 😡
So you probably wasted an I-6 that may have been salvaged because, "...it isn't worth the time...?" For clicks? Really? Your channel was useful years ago, now, not so much.
I don't know how this guy sleeps at night owning "B"rake-"M"y-"W"allet's
Lol I hate E46 😂 always blowing coolant
yup you need to stay on top of those plastic hoses and pressure tank..
I watch your channel to see you fix BMWs, not to watch you intentionally trash them. You probably ruined plenty of parts other people would have really wanted with this horseplay nonsense. Just wasteful all the way around.
Obviously the mindset going into this video was “if i can’t use it, nobody can”. And i feel him, this brand is very infuriating and irritating to work with