That is how my dad who had a sawmill taught me to sharpen 50 years ago and it still works all these years later. Now I am learning to square file and I think I like it. Heating fuel is going to be extra expensive this winter thanks to a certain persons policies so a great wood pile is a great money saver.
Man I really liked your video but it looks like you're left hand is more square with bar than the right. Not being a smartass , just an observation. I sharpen a chain the same way. The video was very informative, thanks !
I have been collecting firewood for some time. I saw a video of this guy north of the Arctic circle collecting firewood and he looked like he had enough for several years but it didn't stop him from collecting more. There is nothing like the radiant heat from a proper wood stove unless you are eating some bean with ham soup.
@@hillbilly4christ638 Iam in Ohio our winters as of late haven’t been to bad but bare minimum I keep 3 winter worth of wood all the time my thought was what if I get hurt or sick and can’t cut for a season atleast that way I have wood here that’s easy to get so I can heal up just my thought on multiple years of wood and it gives the wood time to season up good I like atleast a year season but 2-3 is better that way you know for a fact it’s as dry as it can be and it burns half again hotter seasoned 2 years versus 1 year just my opinion/thought lol
Yes! Sharp advice, well articulated. I’m in the UK and I sharpen exactly like this. I tap the file to clear the swarf, I lift the file on the back stroke to prevent the teeth ‘knocking over’, I file ‘til it raises a burr and the burr falls off and I can't see the sharp edge, end on. I don’t use gadgets, except for a depth gauge file guide. And then I round off the back of the ‘flat’ on the top of the depth gauge to mimic the original profile - important on a chain without anti-kickback ramps like yours has. You stress the importance of correct height on the depth gauge (which you call a raker). Low depth gauges, exactly as you say) produces grabbing and vibration. And then your saw cuts without your having to apply any pressure. I'm always stressing this because by pushing on the saw to make it cut, you are gripping tighter. This exacerbates the effects of vibration, despite A/V mounts. Vibration damages tissues and can result in carpal tunnel syndrome or Reynaud’s syndrome (also known as whitefinger or HAVS). There is an operation for the first (painful and needs rehab afterwards plus time off work) but for Hand Arm Vibration Syndrome, it’s nerve damage. Nerves don’t regenerate, so it’s yours for life. Happy days. Keep posting, Tinman.
I switched to a 2 in 1 after going to buy a new file and being up sold the 2 in 1 and I'll never use anything else again. Saves having to go over the rakers and sharpens bloody awesome. I've sharpened chains that cut better than out of the box!
Buckin has for sure taught thousands of people to PROPERLY sharpen their chains. I thought I did a pretty good job. Self taught and 30 years of cutting firewood. After watching Buckin's videos I was like WOW really. Now my chains have never been sharper.
These are such informational videos that you have been putting out! I've learned so much about porting from you and The Ironhorse. In fact you two helped me port my first power saw with fantastic results. I always can't wait to see your new videos.
First Steve, then Buckin, and he inspired me to learn this. Been loving your channel, and if I ever send my saw out, it’s coming to you. This helped me on the rakers man, I appreciate it.
Good job! I used to grind the chains ! I switched to filing after I watched a Buckin Billy Ray video! It takes a while however once you master the file you’ll never go back I like to touch up the chain every time I gas up the saw! I bought a little stump vice to sharpen in the field!
Just came across this video, great information. I've used chainsaws some over the years but have recently gotten into cutting a lot of wood. I've been taking my chains to a local hardware store to have sharpened, it's on and off, the guy told me when I asked, do you check the rakers, he said nahhh, no need to. The last two sharpenings seem pretty bad, the chain don't last long, I get some shavings and some sawdust. The chains get hot quickly! I think I'll try this myself, I sharpen most everything else so why not this. Thanks for the video. You can teach an old dog new tricks 🤣
Awesome man I was wondering when you were gonna put a video up bud!!! Very nice video tinman. I cannot wait for your high-speed internet. Love to see some tinman live. Cannot wait.
I HAVE A BIG BELLY SO IM A GREAT CHAIN SHARPENER I GUESS ALL THOSE SUNDAY ROASTBEEF DINNERS HELPED ME OUT🤣🤣🤣👍🏽👍🏽👍🏽LOL ALL JOKES ASIDE GREAT VIDEO TINMAN GREAT WAY OF EXPLAINING THINGS TAKE CARE BUDDY
Just came across this and I appreciate your insight. I've been heating my house with wood since 1984 and got into the electric sharpener gimmicks. It's nice to hand sharpen again. Oh, my wife heard the last of you video and the comment about a life changing experience...she said you've been in the woods way too long! Bwahaha! Then she gave me that "wink" ;)
Firewood is the bomb, sharpening a chainsaw is essential to this. This is a very good instructional vid. I have watched dozens of sharpening vids. You have covered everything here, I agree with the exercise thing for sure, I am 61 it is even more important now......thanks for this vid.
Is it me but I find great satisfaction in hand filing. My first attempts were a disaster !!! Like you after watching Buckin BR, my chainsaw now rips through logs like butter. Great video as usual . Wish I could give more than one👍
All those complicated tools are just marketing product to get more money from people... Need only a file for tooth and 2nd one for rakers and a raker gauge, that's all!👍 Great video!
I was instructed to generally sharpen the teeth in such a manner that 1/8 of the file stands proud of the top of the tooth when passing through the gullet. Definitely wait until the burr forms and disappears, as mentioned. Was also under the impression that lowering the rakers in a uniform manner as a set, rather than per tooth, was a good way to ensure a smooth-cutting chain. I believe the assumption is that any teeth that are too high (needed less filing initially) will be dulled early (yes there is some chatter) and will be addressed at the next sharpening, haha. So far so good, on my end. Also, the file has a twist built in, so I rotate the file every 10 swipes or so instead of twisting. They seem to wear more evenly.
Great video Tinman. Please explain to me the importance of pulling the starter cord out before killing the engine, I’m trying to learn all I can and really appreciate you
between you and Buckin I finally "sharpened" my chain. I used to go through the motion of filling, but what a difference getting the Gullet will do for you.
WHAT? You weren't born knowing how to port? I knew a guy that did a little porting on his way out! Lol Great video Tinman. Thank you, you're appreciated.
You mentioned needing to wear cheaters- they can actually help when sharpening a chain so you can see burrs on the chain that you might not catch with the naked eye. Nothing wrong with a little bit of eye protection at the same time. Thanks for this how to video and the encouragement to go out and make it happen.
i've just been watching "guilty of treeson's" guide too square filing well worth a look they compared round and square came out 45% faster with square!!! really buckin is great on his filing and correct but square filing is like warp speeding your cutting! with the right angles it can make a more durable tooth edge, i was shockingly impressed!
Yes, I watched their video a month or so ago. I could not believe the difference in a new chain vs hand filed round file, and hand filed square filed. Time in the cut went from almost :30 seconds to less than :15. Why all the porting, etc chasing seconds when filing made a bigger difference.
Hey Tinman, just came to your channel via Buckin Billy , I cut lots of firewood for myself and others and I agree , you need a sharp chain, cutting with a dull chain is hard on the saw and hard on yourself
I also use a sharpie to mark my start point, but soon i will have to have Chris sharpen the chains, because i know i wont be able to see the gullet in a few years. I was taught to put a sharpie coating into the gullet many years ago, to be able to see that i was getting the gullet and to check my angles, these are a few good tricks to help a person learn about sharpening a chain. How it works is the dot on top identifies the start point, the coloring of the gullet area shows how you are sharpening, so if you miss an area of the gullet, you will see the remaining sharpie mark, and need to either continue to sharpen or change your angle!
I file the same way but I like to keep a file guide for the shop. After work I’ll sharpen all my chains free hand but then take a file guide and by tilting the guide back a little I can get a thinner edge on the top plate. It only takes a swipe or two after a full sharpen and it will be razor sharp. I kinda took that from guilty of treeson channel although he probably does it a little different.
Hand sharpening is the “peaceful” part of running MY saws. It’s when I get to take a break and assess myself for: tired, thirsty, hungry, or anything else for that matter. Heck, it gives my brain a chance to think about other things besides that big “potentially” dangerous thing that I’m running.
Thanks for the video I as well am way better at hand filling thanks to buckin. It has made me enjoy running a saw much more. If you want to try another file brand I like save edge they are pretty sharp and quick cutting. And I also like pferd they have many different cutting files
Good video liked it a lot much better hat! Notice it looks like you use the same files as buckn his has the green ring at the end what brand are they? They seem to really take the metal off quick
Also, buying a machine like a chain grinder has a negative effect on the environment (collectively, it adds up). Blunt files can be thrown in the scrap steel bin and be recycled with a bit of energy, which may have come from the sun, or wind, etc. Just another tick for hand filing.
Great information-thank you. I agree-life is better after cutting wood. Interested in how you “hop up” your saws! When I was a kid-I had a Rupp Dart Kart w a Mac91B motor that I windowed the piston on. It ran like a bat outta hell. I would coast backwards down our driveway, and the burn rubber all the way up until my dad finally told me to knock that shit off. I run a Stihl 441 Mag clearing my land here in Arkinsaw-How do we hop it up ? 🤔
After getting a 61 white top with a 272xp cylinder and piston and carb, then learning hand filing from Buckin, cutting wood is fun again. Now after watching your videos I'm going to have a go at doing a conversion AND a port job myself. Thank you!
Morning sir, good sharpening tutorial here. A couple additional ideas. You were tapping the file - that's to clean it out folks. They load up quite quick and need to be cleaned. Speaking of files - they're relatively cheap - I buy them a box at a time and when they're even a wee bit dull they go away. Filing on the tailgate is about right for most people for height and ergonomics. If you take even a 2' long chunk of 6"x 6" or a tad bigger, cut a slot into it and drop the front of the bar in that slot while sharpening it'll squirm around less. Anyways, just thoughts from a semi-old guy who's been cutting firewood for 40+ years. Stay well Tinman.
Ya anything you can do to get that saw more stable while learning will help immensely! I’ll also tighten the chain on the bar before starting. Quite tight. Stops that bit of wiggle the chain gets on the bar. Just remember to loosen it again afterwards. Good tip there RC
I hand file this way, and every 2 or 3 I run the Stihl 2 in 1. It's a matter of efficiency, keeps me in the game all day long. The Stihl 2 in 1 is not just for beginners, but a little slower and hand filing gets the gullet and the underside of the top plate a little better, imho.
It is Billy Ray that gave me a way for success. I just uploaded two video's paying homage to Buckin one is Bucking Red Oak in NH. and the other is Falling a red Oak with Humboldt in NH. Its good to hear an other say it the way it is. Thanks
I find the oregon files are a smoother cut the husqvarna intensive cuts are great files but are an aggressive cutting file and dont seem to last as long as the oregon files ill get about 10 sharpenings on the oregon file on a 24" bar and only about 6-8 on the husqvarna
What brands of files do you recommend. I have used the oregon files from the big box stores and they dull rather quick and do not cut very fast. I get maybe three sharpening's out of them before they are toast.
I just wanted to know, do you have any experience with a helicoil as a replacement for a stripped spark plug thread? I have killed mine because of stupidity and not paying attention. Maybe you can help me with that
I count out of ocd and to have an idea of how much I had to work that tooth if one take 30 and one take 15 then on takes about 30 I check my riders and oiler just helps me catch things before it's to late and damage the bar or kills the chain
He’s got a video on tuning carbs and it’s a good one. The cliff notes: raise idle with screw until chain is whirring along. Adjust L jet until it is at peak velocity then back out just a hair to slow it down. Turn your idle back down. Check for 1-pull restart and saw running well laying on its side. Now tune your H jet so it has a raspy 4-stroke note as it maxes RPM, but cleans up when you sink it into wood. Tune carb only when saw is warmed up. (On H&L jets? In is lean, out is rich)
Buckin changed the game once he start teaching people how to hand file it's way better then any guide tool. Plus is there really anything more relaxing then sitting down an filing
Sorry tin man... the stihl 2 in one sharpener is the best device I have ever used in 35 years in 4 strokes your chain rt before your eyes shapes into a brand new chain and files the rakers at the same time. You cannot tell the difference between a new chain and the one I filed, not to mention sharper than factory
Stay with it Kain👍it’s like learning how to play an instrument. Practice practice practice. What helped me the most other than this amazing community is this. Don’t let it get too far gone between sharpening’s. Touch it up after each tank or two. It’s far less daunting of a task and you’ll get more practice in a shorter span. Building up your muscle memory each time. Hope this helps🙂
@@shapeshifter7753 Thank buddy! Practice makes perfect....I still get a little confused on what file size to use also...is there a quick rule of thumb?
Kain Kustom Garage I don’t hear this mentioned ever but my experience is line up the bottom of your file to the second bend below your cutter. The top of your file should now be just above your cutting edge. That bend is also a guide😉keep filling following that bend in the side plate and you’ll always have the correct gullet profile😁 have a good look. She’s subtle but this helped me a lot! Mostly cause I deal with various brands and vintages of chain
That is how my dad who had a sawmill taught me to sharpen 50 years ago and it still works all these years later. Now I am learning to square file and I think I like it. Heating fuel is going to be extra expensive this winter thanks to a certain persons policies so a great wood pile is a great money saver.
Oh yeah! Square filing is great! I started to square file a bit more than year ago and i like it better! Thanks to Buckin'!
Man I really liked your video but it looks like you're left hand is more square with bar than the right. Not being a smartass , just an observation. I sharpen a chain the same way. The video was very informative, thanks !
I have been collecting firewood for some time. I saw a video of this guy north of the Arctic circle collecting firewood and he looked like he had enough for several years but it didn't stop him from collecting more. There is nothing like the radiant heat from a proper wood stove unless you are eating some bean with ham soup.
@@hillbilly4christ638 Iam in Ohio our winters as of late haven’t been to bad but bare minimum I keep 3 winter worth of wood all the time my thought was what if I get hurt or sick and can’t cut for a season atleast that way I have wood here that’s easy to get so I can heal up just my thought on multiple years of wood and it gives the wood time to season up good I like atleast a year season but 2-3 is better that way you know for a fact it’s as dry as it can be and it burns half again hotter seasoned 2 years versus 1 year just my opinion/thought lol
Yes! Sharp advice, well articulated.
I’m in the UK and I sharpen exactly like this. I tap the file to clear the swarf, I lift the file on the back stroke to prevent the teeth ‘knocking over’, I file ‘til it raises a burr and the burr falls off and I can't see the sharp edge, end on. I don’t use gadgets, except for a depth gauge file guide. And then I round off the back of the ‘flat’ on the top of the depth gauge to mimic the original profile - important on a chain without anti-kickback ramps like yours has. You stress the importance of correct height on the depth gauge (which you call a raker). Low depth gauges, exactly as you say) produces grabbing and vibration.
And then your saw cuts without your having to apply any pressure. I'm always stressing this because by pushing on the saw to make it cut, you are gripping tighter. This exacerbates the effects of vibration, despite A/V mounts. Vibration damages tissues and can result in carpal tunnel syndrome or Reynaud’s syndrome (also known as whitefinger or HAVS). There is an operation for the first (painful and needs rehab afterwards plus time off work) but for Hand Arm Vibration Syndrome, it’s nerve damage. Nerves don’t regenerate, so it’s yours for life. Happy days.
Keep posting, Tinman.
I switched to a 2 in 1 after going to buy a new file and being up sold the 2 in 1 and I'll never use anything else again. Saves having to go over the rakers and sharpens bloody awesome.
I've sharpened chains that cut better than out of the box!
Buckin has for sure taught thousands of people to PROPERLY sharpen their chains. I thought I did a pretty good job. Self taught and 30 years of cutting firewood. After watching Buckin's videos I was like WOW really. Now my chains have never been sharper.
These are such informational videos that you have been putting out! I've learned so much about porting from you and The Ironhorse. In fact you two helped me port my first power saw with fantastic results. I always can't wait to see your new videos.
Thats awesome!! Sharing knowledge is what its all about!!
First Steve, then Buckin, and he inspired me to learn this. Been loving your channel, and if I ever send my saw out, it’s coming to you. This helped me on the rakers man, I appreciate it.
Yea buckin taught me how to file a wicked chain as well..even got my square filing on point ..now I'm hooked on square filed chain!!
I thought i was good at filing till i watched your and billys videos . Thanks for the tips.
A dull chain will heat up to the point of causing chain to stretch. That's why I always dress the chain when I re fuel.
I went to square and never looked back! Round is great but once I figured out the square it’s just as quick.
Hand filed square is tricker to learn but man does it cut gloriously.
Bless AWESOME 👏 video. Answered a lot of questions about guides or by hand. It’s by hand. Thanks 🙏
Good job! I used to grind the chains ! I switched to filing after I watched a Buckin Billy Ray video! It takes a while however once you master the file you’ll never go back I like to touch up the chain every time I gas up the saw! I bought a little stump vice to sharpen in the field!
Just came across this video, great information.
I've used chainsaws some over the years but have recently gotten into cutting a lot of wood.
I've been taking my chains to a local hardware store to have sharpened, it's on and off, the guy told me when I asked, do you check the rakers, he said nahhh, no need to.
The last two sharpenings seem pretty bad, the chain don't last long, I get some shavings and some sawdust.
The chains get hot quickly!
I think I'll try this myself, I sharpen most everything else so why not this.
Thanks for the video. You can teach an old dog new tricks 🤣
Another great video tinman. Good sharp chain extends the life of the powersaw👍🏼
Awesome man I was wondering when you were gonna put a video up bud!!! Very nice video tinman. I cannot wait for your high-speed internet. Love to see some tinman live. Cannot wait.
I HAVE A BIG BELLY SO IM A GREAT CHAIN SHARPENER I GUESS ALL THOSE SUNDAY ROASTBEEF DINNERS HELPED ME OUT🤣🤣🤣👍🏽👍🏽👍🏽LOL ALL JOKES ASIDE GREAT VIDEO TINMAN GREAT WAY OF EXPLAINING THINGS TAKE CARE BUDDY
Yep my belly's my saw vice too 😂
a sharp chain, saves gas, saves energy, saves time and makes work fun again. get that gullet.
Man your videos are so amazing and helpful thank you!
Since 1976 I've tried every gismo made. I also use only a file now.
Like you said, I've never seen a logger use nothing but a file.
That’s right!
Beautiful rendition. Turn the G into a C 💪🏻🪓🦾. Great work Tinman !!!!
Kindness and love
Looked just like BBR's vids. Nice job. I am now trying to hand file my own chains. Take Care, Stay Safe and Be Kind...
Just came across this and I appreciate your insight. I've been heating my house with wood since 1984 and got into the electric sharpener gimmicks. It's nice to hand sharpen again. Oh, my wife heard the last of you video and the comment about a life changing experience...she said you've been in the woods way too long! Bwahaha! Then she gave me that "wink" ;)
Firewood is the bomb, sharpening a chainsaw is essential to this. This is a very good instructional vid. I have watched dozens of sharpening vids. You have covered everything here, I agree with the exercise thing for sure, I am 61 it is even more important now......thanks for this vid.
Is it me but I find great satisfaction in hand filing. My first attempts were a disaster !!! Like you after watching Buckin BR, my chainsaw now rips through logs like butter. Great video as usual . Wish I could give more than one👍
❤ couldn't agree with you more, handfiling is so therapeutic! Tinman is a real artificer!
Can't argue with a chain cutting like that. Great job on the sharpening.
Love it tin man. I hit mine like that too. The wild thing I ported after ur steps cuts like maaaaaad
Hi tinman. Nice wee add onto to the pick up truck also saw sounds awesome
All those complicated tools are just marketing product to get more money from people...
Need only a file for tooth and 2nd one for rakers and a raker gauge, that's all!👍
Great video!
Good job. I like to mark the top of the first tooth I sharpen with a speck of paint or a sharpie so I know where I began.
Those advanced cut Oregon chains are great for climbing saws. I swear by them. The husky progressive raker gauge gets them good
Beautiful job on the file there Tinman. My filing is getting close. Still use one guide occasionally. Thanks for sharing
I was instructed to generally sharpen the teeth in such a manner that 1/8 of the file stands proud of the top of the tooth when passing through the gullet. Definitely wait until the burr forms and disappears, as mentioned. Was also under the impression that lowering the rakers in a uniform manner as a set, rather than per tooth, was a good way to ensure a smooth-cutting chain. I believe the assumption is that any teeth that are too high (needed less filing initially) will be dulled early (yes there is some chatter) and will be addressed at the next sharpening, haha. So far so good, on my end. Also, the file has a twist built in, so I rotate the file every 10 swipes or so instead of twisting. They seem to wear more evenly.
Love it ...Thank you and what brand files you using ???
Thanx for the tips on pistons Tinman¡ Goin to try this on a couple XLs I have.
Great Video Tinman !! 😎
Great video Tinman. Please explain to me the importance of pulling the starter cord out before killing the engine, I’m trying to learn all I can and really appreciate you
All I heard was “it helps to have a belly” and I instantly feel like I’m really good at sharpening now. Thanks for this video man, very helpful.
Sharpening a chain is therapeutic .
between you and Buckin I finally "sharpened" my chain. I used to go through the motion of filling, but what a difference getting the Gullet will do for you.
So...A deeper gullet will throw longer shaving/chip instead wasting energy on cutting it up again and throwing it.
Great video, learned a lot ! I also subscribe
WHAT? You weren't born knowing how to port? I knew a guy that did a little porting on his way out! Lol Great video Tinman. Thank you, you're appreciated.
Spot on!
You mentioned needing to wear cheaters- they can actually help when sharpening a chain so you can see burrs on the chain that you might not catch with the naked eye. Nothing wrong with a little bit of eye protection at the same time.
Thanks for this how to video and the encouragement to go out and make it happen.
i've just been watching "guilty of treeson's" guide too square filing well worth a look they compared round and square came out 45% faster with square!!! really buckin is great on his filing and correct but square filing is like warp speeding your cutting! with the right angles it can make a more durable tooth edge, i was shockingly impressed!
Yes, I watched their video a month or so ago. I could not believe the difference in a new chain vs hand filed round file, and hand filed square filed. Time in the cut went from almost :30 seconds to less than :15. Why all the porting, etc chasing seconds when filing made a bigger difference.
Throw away those sharpening guides, now use this raker guide🤔
Hey Tinman, just came to your channel via Buckin Billy , I cut lots of firewood for myself and others and I agree , you need a sharp chain, cutting with a dull chain is hard on the saw and hard on yourself
Every one has to learn to do anything, practice makes perfect! Great info! Thanks for sharing buddy! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
I've spent a bunch of money to end up doing it the basic way.
@@ClintsHobbiesDIY haha, you ain’t by yourself!
THANK-YOU VERY MUCH FOR YOUR DEMOSTRATION SIR .
I also use a sharpie to mark my start point, but soon i will have to have Chris sharpen the chains, because i know i wont be able to see the gullet in a few years. I was taught to put a sharpie coating into the gullet many years ago, to be able to see that i was getting the gullet and to check my angles, these are a few good tricks to help a person learn about sharpening a chain.
How it works is the dot on top identifies the start point, the coloring of the gullet area shows how you are sharpening, so if you miss an area of the gullet, you will see the remaining sharpie mark, and need to either continue to sharpen or change your angle!
Great video
Look at those chips! Thats a mighty good lookin chain.
Even Ironhorse tells you watch Buckin to learn how to file good video Buckin taught us well he even had throw guides out 🤙👏👊
The truth!
Great Video! Thanks to Buckin' and the Tinman!
When I get down to the witness marks that's when I goof around square filing
I file the same way but I like to keep a file guide for the shop. After work I’ll sharpen all my chains free hand but then take a file guide and by tilting the guide back a little I can get a thinner edge on the top plate. It only takes a swipe or two after a full sharpen and it will be razor sharp. I kinda took that from guilty of treeson channel although he probably does it a little different.
Hand sharpening is the “peaceful” part of running MY saws. It’s when I get to take a break and assess myself for: tired, thirsty, hungry, or anything else for that matter. Heck, it gives my brain a chance to think about other things besides that big “potentially” dangerous thing that I’m running.
Thanks for the video I as well am way better at hand filling thanks to buckin. It has made me enjoy running a saw much more. If you want to try another file brand I like save edge they are pretty sharp and quick cutting. And I also like pferd they have many different cutting files
Good video liked it a lot much better hat! Notice it looks like you use the same files as buckn his has the green ring at the end what brand are they? They seem to really take the metal off quick
Oregon files. That’s the only files that I’ve ever seen with the factory painted ends. It may just be a “Canadian” thing though. 😮
Tinman how about a vid on grinding and what you use. Not an endorsement of grinder just a learning vid. Keep the vids coming. Be safe and be careful.
Also, buying a machine like a chain grinder has a negative effect on the environment (collectively, it adds up). Blunt files can be thrown in the scrap steel bin and be recycled with a bit of energy, which may have come from the sun, or wind, etc. Just another tick for hand filing.
Great information-thank you. I agree-life is better after cutting wood. Interested in how you “hop up” your saws! When I was a kid-I had a Rupp Dart Kart w a Mac91B motor that I windowed the piston on. It ran like a bat outta hell. I would coast backwards down our driveway, and the burn rubber all the way up until my dad finally told me to knock that shit off. I run a Stihl 441 Mag clearing my land here in Arkinsaw-How do we hop it up ? 🤔
Thank you!!
After getting a 61 white top with a 272xp cylinder and piston and carb, then learning hand filing from Buckin, cutting wood is fun again. Now after watching your videos I'm going to have a go at doing a conversion AND a port job myself. Thank you!
Good video!
Morning sir, good sharpening tutorial here. A couple additional ideas. You were tapping the file - that's to clean it out folks. They load up quite quick and need to be cleaned. Speaking of files - they're relatively cheap - I buy them a box at a time and when they're even a wee bit dull they go away. Filing on the tailgate is about right for most people for height and ergonomics. If you take even a 2' long chunk of 6"x 6" or a tad bigger, cut a slot into it and drop the front of the bar in that slot while sharpening it'll squirm around less.
Anyways, just thoughts from a semi-old guy who's been cutting firewood for 40+ years. Stay well Tinman.
Ya anything you can do to get that saw more stable while learning will help immensely! I’ll also tighten the chain on the bar before starting. Quite tight. Stops that bit of wiggle the chain gets on the bar. Just remember to loosen it again afterwards. Good tip there RC
Wise words. Thanks. i am 65 Still going in the shop.
I hand file this way, and every 2 or 3 I run the Stihl 2 in 1. It's a matter of efficiency, keeps me in the game all day long. The Stihl 2 in 1 is not just for beginners, but a little slower and hand filing gets the gullet and the underside of the top plate a little better, imho.
It is Billy Ray that gave me a way for success. I just uploaded two video's paying homage to Buckin one is Bucking Red Oak in NH. and the other is Falling a red Oak with Humboldt in NH. Its good to hear an other say it the way it is. Thanks
Hey there bud....do you know if Tony has a place to order those 90 degree heads that he sent you and Harvey? I want to order one of those...?
Nice wee video tinman
I here your words Tinman. I don’t go to the gym for a workout I hit the wood pile!
I find the oregon files are a smoother cut the husqvarna intensive cuts are great files but are an aggressive cutting file and dont seem to last as long as the oregon files ill get about 10 sharpenings on the oregon file on a 24" bar and only about 6-8 on the husqvarna
What brands of files do you recommend. I have used the oregon files from the big box stores and they dull rather quick and do not cut very fast. I get maybe three sharpening's out of them before they are toast.
I use to run Oregon and husky.. but switched to stihl files..and I like them much better
I just wanted to know, do you have any experience with a helicoil as a replacement for a stripped spark plug thread? I have killed mine because of stupidity and not paying attention. Maybe you can help me with that
Yup she cuts.oregon files from the big box stores don't last 3 files maybe great video
I count out of ocd and to have an idea of how much I had to work that tooth if one take 30 and one take 15 then on takes about 30 I check my riders and oiler just helps me catch things before it's to late and damage the bar or kills the chain
Could you do a video on the 200t how to fine tune a carburetor and what each setting do I’m having a hard time tuning my
He’s got a video on tuning carbs and it’s a good one. The cliff notes: raise idle with screw until chain is whirring along. Adjust L jet until it is at peak velocity then back out just a hair to slow it down. Turn your idle back down. Check for 1-pull restart and saw running well laying on its side. Now tune your H jet so it has a raspy 4-stroke note as it maxes RPM, but cleans up when you sink it into wood. Tune carb only when saw is warmed up. (On H&L jets? In is lean, out is rich)
Buckin changed the game once he start teaching people how to hand file it's way better then any guide tool. Plus is there really anything more relaxing then sitting down an filing
Good video mate the only file that does my head in is 4mm for my 200t so small and bendy lol good tips
I use a roller guide and seems to work
What chain company puts the witness mark on the chain.
Oh yeah, I always mark wry chain where I start. 1 mark in each side I do.
Gamn sharpener works great fast and even
Billy Ray is the GOAT
Thanks
Sorry tin man... the stihl 2 in one sharpener is the best device I have ever used in 35 years in 4 strokes your chain rt before your eyes shapes into a brand new chain and files the rakers at the same time. You cannot tell the difference between a new chain and the one I filed, not to mention sharper than factory
I hand file as well.. make the chain pull into the log...
HELP... I cannot find a 1/8 Round file at any hardware shore ( not in Lowes , not in Home Depot , not on Amazon ) for Mini chainsaw
What State are you in?
THAT IS WHY I TUNED INTO BUCKINS CHANNEL SO LONG AGO
Ha! I clicked on this thinking it was a Buckin Billy Ray video.
I can tell u rt now throw away your chain with the double rakers! For a guy that uses a saw alot, u would get way better performance
Thanks Tinman! I'm still struggling with it !
Stay with it Kain👍it’s like learning how to play an instrument. Practice practice practice. What helped me the most other than this amazing community is this. Don’t let it get too far gone between sharpening’s. Touch it up after each tank or two. It’s far less daunting of a task and you’ll get more practice in a shorter span. Building up your muscle memory each time. Hope this helps🙂
@@shapeshifter7753 Thank buddy! Practice makes perfect....I still get a little confused on what file size to use also...is there a quick rule of thumb?
Kain Kustom Garage I don’t hear this mentioned ever but my experience is line up the bottom of your file to the second bend below your cutter. The top of your file should now be just above your cutting edge. That bend is also a guide😉keep filling following that bend in the side plate and you’ll always have the correct gullet profile😁 have a good look. She’s subtle but this helped me a lot! Mostly cause I deal with various brands and vintages of chain
@@shapeshifter7753 Cool! I'll try that!
Kain Kustom Garage god speed freind😎
Clean your files with a wire brush or wire wheel on a bench grinder
Literally get 2x as many files cleaning the cutters out properly
Right on there. I use a file card. It’s sole purpose is to clean files
Tinman's dessert. Cottonwood cookies!
I put dots on mine as well 🤣
Amen . Never have used a file guide , EVER. Personally I think they are a waste of time
Looks like a nice day to be outside.
is your file bigger than the chainsaw chain; ex: 5/32 use a bigger file??
1st performance mod to a power saw, learn how to sharpen a chain properly ........ i also went up one size in file sizing it helped massively! .......