There is an easier way. Look behind the steering stabilizer. You'll find 2 retaining clips on posts to the triple tree. Remove the two clips and the headlight assembly tips upward giving you full access.
Thanks this help when I thought I needed new bulbs however realised you only get parking lights until the bike is fully on and not just on 1st stage ignition
Hello, I have not been able to remove the position bulb, it has a lock, but my hands do not fit to remove the connector, in the video it is not seen in detail when you remove it. any suggestions? thanks
@@FunwithNick it was Parking Light Bulb (in spanish is "Posición"). Sorry for my english, I could remove the connector with a screwdriver, very hard mission. Thanks so much for the video.
This video is very helpfull thank you for this. I have just one question. How do you pull the hb3 high beam out so easily? Im pulling, twisting both directions and its so stuck i dont know how to do it right. Do you have any tips? Grtz
Hello, I got it off Ali express. It's 70mm halo light. Installation is easy just strip the wire on the halo and push it in between the connector and wrap electrical tape around it
There is an easier way. Look behind the steering stabilizer. You'll find 2 retaining clips on posts to the triple tree. Remove the two clips and the headlight assembly tips upward giving you full access.
Thanks mate
Thanks this help when I thought I needed new bulbs however realised you only get parking lights until the bike is fully on and not just on 1st stage ignition
I'm glad it worked out for you mate.
Hi ...
Are the low beam and high beam bulb the same models ?
@@milanjosic they are different size brother
Hello, I have not been able to remove the position bulb, it has a lock, but my hands do not fit to remove the connector, in the video it is not seen in detail when you remove it. any suggestions? thanks
Low beam or high beam mate
@@FunwithNick it was Parking Light Bulb (in spanish is "Posición"). Sorry for my english, I could remove the connector with a screwdriver, very hard mission. Thanks so much for the video.
@@gustavosoto2053 the parking lamp on the Lo beam side is super hard to remove out.
This video is very helpfull thank you for this. I have just one question. How do you pull the hb3 high beam out so easily? Im pulling, twisting both directions and its so stuck i dont know how to do it right. Do you have any tips? Grtz
@@freebiker100 the high beam is just twist and it should come out.
How did you get out that small park light installed in the low beam? It's a pain to reach and I don't know if it is just to pull out or twist
I pull it out gently mate.
@@FunwithNick did you twist that socket out?
@@chauboii yes twist it see if that helps
Hi bro, Where did you buy the ring light? and how did you install it
Hello, I got it off Ali express. It's 70mm halo light.
Installation is easy just strip the wire on the halo and push it in between the connector and wrap electrical tape around it
@@FunwithNick Thank you bro, very nice touch!
@@marko_s1000r glad I can help man.
អាហ្មឹងគេហៅអាប៊ីអេមមែនបង?
Yes bong 😂
Das Glas der Glühlampe sollte
man nicht mit Finger anfassen :-)